I come from the future to tell you that recent versions of RallySimFans launcher has included a new option to automatically set the soft-limit of steering rotation, although not all wheel models are supported yet
Yes! I found this recently in RBRZONE really helpfull tip thanks for sharing with the world. I want to share with everyone what i found the best INI values for a TSPC. 80% in windows. 200: GR.4, GR.B, Peugeot 106 225: RGT (all but the porsches and the aston martin), 250: Audi gr4 (this is special gr.4) 300: grA, r2/r3, Aston martin. 350: WRC+, Porsche 911 gt3 (both) 450: WRC 2.0 500: Rally3, R4, R5, s2000. For people like me who likes to change the car in the same session its uncomfy but once you know this... if you want to have the best feeling on the wheel you must change the .INI depending the car/class
Great explanation Jason! Thank you so much! I'd like to add a safety notice for users with direct drive wheels. Although increasing the FFB sensitivity above 450'ish feels really good with DD wheels, it will greatly increase the forces during crashes, which can cause injuries in worst case. Keep in mind to take off the hands from your wheel when you crash, just like in real life. Or reduce FFB senistivity below 400 and you're safe ;-)
Are you sure that this value sets the max force? I had the misfortune of launching the game with the launcher's default values which is 150. And at that value I legit almost sprung my wrist with my 8nm CSL DD. Now that I have the values set to 350-ish. Its much more smooth. Before this every single pothole or bump felt like I was hitting a brick wall at 50kph. Could it be that its the range of strength it can spread across? Like in my case the whole 8nm was compressed in 150 increments where now its got 350 increments? I mean Ive been playing it for 2 days only. Probably not a super informed opinion.
@@MedievalRally I have a DD Pro and I used both..lower values and high and I can't feel much. The wheel gets heavy or ligh tdepending on seting but I almost don't feel the texture of the road.
@@andresouza508 Interesting! At 450 on tarmac with my CSL it's feel like it transmits every single patch I see on the asphalt. Maybe you need different settings for the pro? Still a total noob sorry!
Man this vid did it for me. I can now enjoy tarmac in RBR. I went the classic way of turning down FFB strength in game. Your way transformed it totally. I have T500RS and for me the best result after watching this is having max in game, 600 sens in all 3 fields in launcher, 60% in Thrustmaster control panel and adaptive ffb off. One more thing i would mention in the video is to remove all filters from all axes which are there by default. When you think you know it all and you see a video like this... thanks so much.
I used this method you explained but the visual wheel is completely off, rotation on screen doesn't match the wheel..., physics might be right, but it is really stange.
Very interresting that you use in the Game full FFB . For me it is too much and I use RBR online since 2007 ....in CZ plugin . Yes I know the Launcher but don't understand it completly. It,s right that you make in the Wheel the same Rotation degrees as at the Game from the Car ?? This with the Rotation degrees was also a Light problem in RBR ....I never found a right completly setup for the Wheel. I drive momently with 450 degrees by Cars...as A8, R5 and S2000....but your Information is interresting....when I understand this right ....comes in the Wheel the same Rotation degrees as un the Car/ Game ?
Just downloaded the game and its all working relatively well except that the cars from the original vanilla game are missing. Is that normal? Scroll through all the cars but the original game cars aren't there. Weird.
Hello! Do you know how fix this problem? I buyed new wheel Thrustmaster Ts PC wheel and in profile stand Center, but when I play RBR after 3-4 km wheel off Center 2-5 degrees move to left side. Stop game , calibration and then again play
What's your T300 FFB strength running at in the TM control panel?? 350-375 in the RSF Launcher seems incredibly high. I have the TX servo base and with 70% overall strength in CP, 100 in the RSF Launcher, 50% ingame, my FFB seems VERY strong.
Do you have any recommendations on setting up a Logitech G wheel for RBR? Compared to AC the ffb feels very clunky, seems like it might be setup related but I don't know how to fix it
follow the steps in the video. Adjust the sensitivity settings in the RSF launcher. Start at 100 for all surfaces, then try 300 for all surfaces and notice the differences. Find the best balance between raw and dampened out. The lower the sensitivity value the more dampened it will feel (less raw) and the higher the sensitivity the more details you will get, but the strength of the overall FFB will go down.
@@murfenator82 Thank you sir. I'll try to fiddle with it for a bit of time. Might come back with a reply follow up for anyone watching who also might be interested
Hey Jason! Maybe you can help me. I have a two issues with RBR. 1) If I change my Keybindings, it will reset after each restart 2) Somehow, part of my Pacenotes are French, some are English. Sometimes both mixed. If I switch it up in the Pace Note Editor, it resets to the wish wash after each Stage and I have to change it again. Somehow a way so save it? Thank you for this videos, this solved one of my other issues!
I’ve just downloaded RBR got all my pedals and handbrake set but I’ve got no steering? I don’t even get the force feedback menu come up, I’m running a simucube 2 pro, any help would be greatly appreciated.
Long shot here since you posted this months ago. But I installed RSF version of the game. For some reason my Fanatec DD1 isn't getting any FFB. The wheel works I can turn shift etc...but don't get any FFB at all. Any idea what would cause this or how to fix it?
I know this is an old post, but on my CSL DD, I had to set my wheel base to compatibility mode via the button on the base itself, for it to work in RBR. I hope this helps you, if you haven't already figured it out.
Hi. First, thank you for the videos and sec. do you know, by any chance, some plugin or something which will make my in game 1.st person view camera to follow the angle of the front wheels? You know what I mean? So, when you in right corner your camera actually looking slightly right not at the front.
ill try ur settings.. got t300 aswell, i got one little questions tho, the game seems to have problems picking up more than 1 usb slots.. ive had it before in other older games.. but other than disabling the rest including my shifter my wheeel doesnt work because its on usb 2 position.. any advice? thx ;) EDIT: Fixed it, for other ppl with the problem, set wheel rotation quicker.. you need to turn quick lock to lock in setup.
Hi, I'm trying to set up FOV in RBR and just watched this video ua-cam.com/video/JFSEk3I8ADM/v-deo.html you say in the video that you use a value of about 0.76 but a short while later in the video i can see that you have a value of 1.3090 in Phasenote plugin ? I have a Samsung 49 Inch 32: 9 curved Wide Screen gaming monitor, and I sit 65 cm from the screen. Can you please tell me which value I should enter in the Phasenote plugin. I have not managed to understand how to do, I get a value of 0.666 in FOV Calculator and then everything in front of me is completely compressed and impossible to drive? Please help me ... Or if someone else can help me who reads this : ) Thanks in advance !
@@murfenator82 If i set the calculator to 4:3 and Screen Size to the smalest possible 20 inch (my screen is 34 cm high about 13 inch) i get this number, 0.605980rad , and as i said earlier if i put 0.605980 in FOV settings in Phsenote plugin the hole world in front of me get totaly compresed and makes it impossible to drive ?....
@@murfenator82 ok, but my monitor is 32:9 49 inch wide curved, i get this number: 0.665517 and as i had said earlier, if i put that number in to FOV settings in phasenote plugin. the hole world in front if me get totaly compreesed ? and makes it impossible to drive.....
@@hellracermaniac It should be similar to what my screen looks like in my youtube videos. You can move your monitor closer to you, although it looks like its about 26 inches away from you right now? FOV is not really a subjective thing. Its a mathematical calculation of what it would be to put your monitor in your car in front of your face as your window to view the world through. If your FOV isn't correct the road will be too narrow or too wide and curves won't be correct, and the sense of speed will either be too slow or too fast. My guess would be that you have been using too high of a FOV that is unrealistic and now that you have corrected it seems slow. You could join the Jannecord discord (look up Jane Lahaanen on youtube) and post a picture of what you are talking about so we can see if it looks correct.
I come from the future to tell you that recent versions of RallySimFans launcher has included a new option to automatically set the soft-limit of steering rotation, although not all wheel models are supported yet
Yes! I found this recently in RBRZONE really helpfull tip thanks for sharing with the world.
I want to share with everyone what i found the best INI values for a TSPC.
80% in windows.
200: GR.4, GR.B, Peugeot 106
225: RGT (all but the porsches and the aston martin),
250: Audi gr4 (this is special gr.4)
300: grA, r2/r3, Aston martin.
350: WRC+, Porsche 911 gt3 (both)
450: WRC 2.0
500: Rally3, R4, R5, s2000.
For people like me who likes to change the car in the same session its uncomfy but once you know this... if you want to have the best feeling on the wheel you must change the .INI depending the car/class
Great explanation Jason! Thank you so much! I'd like to add a safety notice for users with direct drive wheels. Although increasing the FFB sensitivity above 450'ish feels really good with DD wheels, it will greatly increase the forces during crashes, which can cause injuries in worst case. Keep in mind to take off the hands from your wheel when you crash, just like in real life. Or reduce FFB senistivity below 400 and you're safe ;-)
Yikes! Thanks for the heads up!
Are you sure that this value sets the max force? I had the misfortune of launching the game with the launcher's default values which is 150. And at that value I legit almost sprung my wrist with my 8nm CSL DD. Now that I have the values set to 350-ish. Its much more smooth. Before this every single pothole or bump felt like I was hitting a brick wall at 50kph.
Could it be that its the range of strength it can spread across? Like in my case the whole 8nm was compressed in 150 increments where now its got 350 increments? I mean Ive been playing it for 2 days only. Probably not a super informed opinion.
@@MedievalRally I have a DD Pro and I used both..lower values and high and I can't feel much. The wheel gets heavy or ligh tdepending on seting but I almost don't feel the texture of the road.
@@andresouza508 Interesting! At 450 on tarmac with my CSL it's feel like it transmits every single patch I see on the asphalt. Maybe you need different settings for the pro? Still a total noob sorry!
@@MedievalRally no worries... I went completely the other way and set it to 50 and it I can feel it now . tks
Man this vid did it for me. I can now enjoy tarmac in RBR.
I went the classic way of turning down FFB strength in game. Your way transformed it totally.
I have T500RS and for me the best result after watching this is having max in game, 600 sens in all 3 fields in launcher, 60% in Thrustmaster control panel and adaptive ffb off.
One more thing i would mention in the video is to remove all filters from all axes which are there by default.
When you think you know it all and you see a video like this... thanks so much.
Thanks for the video mate and sharing this!
I used this method you explained but the visual wheel is completely off, rotation on screen doesn't match the wheel..., physics might be right, but it is really stange.
Excellent video, thanks!
Very interresting that you use in the Game full FFB . For me it is too much and I use RBR online since 2007 ....in CZ plugin . Yes I know the Launcher but don't understand it completly. It,s right that you make in the Wheel the same Rotation degrees as at the Game from the Car ?? This with the Rotation degrees was also a Light problem in RBR ....I never found a right completly setup for the Wheel. I drive momently with 450 degrees by Cars...as A8, R5 and S2000....but your Information is interresting....when I understand this right ....comes in the Wheel the same Rotation degrees as un the Car/ Game ?
Just downloaded the game and its all working relatively well except that the cars from the original vanilla game are missing. Is that normal? Scroll through all the cars but the original game cars aren't there. Weird.
Hello! Do you know how fix this problem? I buyed new wheel Thrustmaster Ts PC wheel and in profile stand Center, but when I play RBR after 3-4 km wheel off Center 2-5 degrees move to left side. Stop game
, calibration and then again play
What's your T300 FFB strength running at in the TM control panel?? 350-375 in the RSF Launcher seems incredibly high. I have the TX servo base and with 70% overall strength in CP, 100 in the RSF Launcher, 50% ingame, my FFB seems VERY strong.
This game kicks like a mule with the FFB.
In game ffb should always be 100%
Do you have any recommendations on setting up a Logitech G wheel for RBR? Compared to AC the ffb feels very clunky, seems like it might be setup related but I don't know how to fix it
follow the steps in the video. Adjust the sensitivity settings in the RSF launcher. Start at 100 for all surfaces, then try 300 for all surfaces and notice the differences. Find the best balance between raw and dampened out. The lower the sensitivity value the more dampened it will feel (less raw) and the higher the sensitivity the more details you will get, but the strength of the overall FFB will go down.
@@murfenator82 Thank you sir. I'll try to fiddle with it for a bit of time. Might come back with a reply follow up for anyone watching who also might be interested
yeah nothing i do is making the onscreen wheel move 1:1... with G920
NGP is pathetic... gimme original physics any day
@@WacKEDmaN you set that range in the rsf launcher.
@@murfenator82 which setting is that? i dont see anything for the rotation...
Hey Jason! Maybe you can help me. I have a two issues with RBR.
1) If I change my Keybindings, it will reset after each restart
2) Somehow, part of my Pacenotes are French, some are English. Sometimes both mixed. If I switch it up in the Pace Note Editor, it resets to the wish wash after each Stage and I have to change it again. Somehow a way so save it?
Thank you for this videos, this solved one of my other issues!
Same issues for me each time I start RBR... that's mainly why I'm still on Dirt Rally 2.0
I’ve just downloaded RBR got all my pedals and handbrake set but I’ve got no steering? I don’t even get the force feedback menu come up, I’m running a simucube 2 pro, any help would be greatly appreciated.
Can I change a stering wheel rotation in tune car options or only change my t300 rotation in the launcher?
My logitech g27 keeps getting out of center mid stage, only in rbr
Thx Jason! Also DayZ looks different
Ya no idea why it chose that!
Bonjour possible d avoir une photo de vaut reglage dans le profiler thrustmaster ?
Long shot here since you posted this months ago. But I installed RSF version of the game. For some reason my Fanatec DD1 isn't getting any FFB. The wheel works I can turn shift etc...but don't get any FFB at all. Any idea what would cause this or how to fix it?
I know this is an old post, but on my CSL DD, I had to set my wheel base to compatibility mode via the button on the base itself, for it to work in RBR. I hope this helps you, if you haven't already figured it out.
I have a g29 and the force feedback option is dark and won’t let me enter it how to I fix this?
i just fix mine with the no ffb issue by installing the most recent Ghub. also deleted registry following the official guide from logitech.
Hi. First, thank you for the videos and sec. do you know, by any chance, some plugin or something which will make my in game 1.st person view camera to follow the angle of the front wheels? You know what I mean? So, when you in right corner your camera actually looking slightly right not at the front.
For rbr you'll need to get head tracking setup. There are cheap ways to do it with a homemade trackir, and a phone I believe.
can you share your gain settings on the T300 control panel mate?
maybe mines with a ts-pc are bit similar, take a look in the top
Hey I can’t use the launches because I get a message that says “you must install NET Core” how can I fix this?
Not sure if you sorted this by now but I think if you run the installer again the option is in there.
the force feedback option in setting doesn't pop up in the settings
I have a g923 and for me is doing the same have you found a solution?
@@HercMour-or1vj Yeah, I unplugged my shifter then it started working. Idk why
ill try ur settings.. got t300 aswell, i got one little questions tho, the game seems to have problems picking up more than 1 usb slots.. ive had it before in other older games.. but other than disabling the rest including my shifter my wheeel doesnt work because its on usb 2 position.. any advice? thx ;) EDIT: Fixed it, for other ppl with the problem, set wheel rotation quicker.. you need to turn quick lock to lock in setup.
Thank you, I'm going to try this later! Had issues with my T-LCM working but my steering axis wasn't working.
my ffb is darker out. i cant open it. any ideas? fanatec csl elite
Maybe set the Advanced Options button to on in the bottom right corner of the app?
Thanks! Now back to eawrc because I'm tired of all this shit
I have a g29 its not detecting it at all
My wheel is not detect....vrs dd
Mine does the same have you found a solution?
@@HercMour-or1vj just restart my computer haha
@@rcdb4160 The oldest trick in the book im gonna try it
VRS software latest version has a registry fix which helps older games recognize the base.
Does anyone have good setup for g29 ?
Nop
270 grados en logitech App config.
And sensitivy range 175 150 140
Todo activado y fuerzas en 1
Hi, I'm trying to set up FOV in RBR and just watched this video ua-cam.com/video/JFSEk3I8ADM/v-deo.html you say in the video that you use a value of about 0.76 but a short while later in the video i can see that you have a value of 1.3090 in Phasenote plugin ?
I have a Samsung 49 Inch 32: 9 curved Wide Screen gaming monitor, and I sit 65 cm from the screen. Can you please tell me which value I should enter in the Phasenote plugin. I have not managed to understand how to do, I get a value of 0.666 in FOV Calculator and then everything in front of me is completely compressed and impossible to drive? Please help me ...
Or if someone else can help me who reads this : ) Thanks in advance !
Use this to calculate fov:
dinex86.github.io/FOV-Calculator/
@@murfenator82 If i set the calculator to 4:3 and Screen Size to the smalest possible 20 inch (my screen is 34 cm high about 13 inch) i get this number, 0.605980rad , and as i said earlier if i put 0.605980 in FOV settings in Phsenote plugin the hole world in front of me get totaly compresed and makes it impossible to drive ?....
@@hellracermaniac You no longer need to set it to 4:3. He has updated the calculator to correct the fov for 16:9 monitors in RBR.
@@murfenator82 ok, but my monitor is 32:9 49 inch wide curved,
i get this number: 0.665517 and as i had said earlier, if i put that number in to FOV settings in phasenote plugin. the hole world in front if me get totaly compreesed ? and makes it impossible to drive.....
@@hellracermaniac It should be similar to what my screen looks like in my youtube videos. You can move your monitor closer to you, although it looks like its about 26 inches away from you right now? FOV is not really a subjective thing. Its a mathematical calculation of what it would be to put your monitor in your car in front of your face as your window to view the world through. If your FOV isn't correct the road will be too narrow or too wide and curves won't be correct, and the sense of speed will either be too slow or too fast. My guess would be that you have been using too high of a FOV that is unrealistic and now that you have corrected it seems slow. You could join the Jannecord discord (look up Jane Lahaanen on youtube) and post a picture of what you are talking about so we can see if it looks correct.
CSL DD...no FFB...anyone have this issue or know how to help me get a fix. PC mode and compat mode...nothing.