Volts Mini bikes .330 cam in the Tillotson 225 how will it run?
Вставка
- Опубліковано 24 лют 2023
- Volts Mini bikes .330 cam in the Tillotson 225 how will it run?
Installed a Volts Mini bikes .330 cam in the Tillotson 225 powered Mega Moto 80/105 minibike to see how it would run compared to Paul's karts PKRPM cam.
212 Ghost kart racing engine playlist - • 212 Ghost VS 206 Brigg...
Mega moto e-bike playlist - • Raced the QS120 e-bike...
Predator 224 playlist - • Predator 224 gets a 26...
Mega moto performance playlist - • Mega Moto 80/105 unbox...
Bonanza minibike playlist - • 1.3 ratio rockers vers...
Coleman cc100x Predator 212 playlist - • Free Predator 212 perf...
Road rebel go kart playlist - • Kart vs scare chair / ...
Coleman cc100x/DB003 minibike micro bike playlist - • Will a Trumpet exhaust...
Coleman cc100x playlist - • Coleman CC100x Minibik...
Doodlebug playlist - • Is the Doodlebug minib...
Coleman CT200U-EX playlist - • Coleman CT200U EX mini...
Azusa minibike playlist - • Is a Ghost faster with...
Coleman CT200U playlist - • Coleman CT200U minibik...
Predator /Tillotson playlist - • Free Predator 212 perf...
Minibike playlist - • Mega Moto 212 goes 60 ...
Subscribe for more minibike content: ua-cam.com/users/Black66fea...
Instagram - Doubledown555Black66
_________________________________________________________________
Parts used
Volts mini bikes .330 cam - voltsminibikes.com/products/3...
Titanium keeper and retainer kit - voltsminibikes.com/products/t...
Mega Moto 212 Mini-bike kit - www.gopowersports.com/mega-mo...
Tillotson 225 Performance engine - www.gopowersports.com/225cc-t...
Aluminum gas tank - www.gopowersports.com/gas-tan...
Pauls karts cam - www.paulskarts.com/product/ca...
Don't forget to leave a comment to let me know if you enjoyed this video! :)
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
That duration on the volts cam sure is letting those big valves do work compared to the Paul's kart. Fast bike fore sure. Love to see same setup with step exhaust and no muffler.
@Black66 Do you have the cam specs/card? They aren't posted with the cam on the site.
@@gregswafford9839 No, it didn't come with a card. Im not sure of the specs.
Loved how that dirt patch got the wheel speed up for that cam
How in the hell have I never seen this channel before! Just found out like 500 of my subscribers watch this guy was like what us that? Absolutely love the minibike content! Now I have to build 250cc 2 cycle mini bike after watching this lol I got the itch now 🍺😮👍
He does great test videos for sure !
My favorite bike! What a great city cruiser it would be geared down.
Yeah mine too! It is a great cruiser .
That was quite of a difference. Thank you for all you do to keep us informed.
That's one sick minibike brother, can't wait to see the next video.
Another great video with useful content, Thx Buddy!
Another awesome video man! Looking forward to the gts video.
Paul's karts is local like 30mins from me. .I've been following him for a whike.. a cool dude and does some great work..im in the process of building a hemi 212 switching from a flathead methanol briggs.
Awesome! We use to run the flathead Briggs in kart racing back in the 1980s with billet Hortsmnan parts on methanol. There are a couple picks in the community tab on the channel.
That volts cam is sweet for the price! Thanks for sharing dude👍
One of the best mini bike channels out here right now. I'm really curious to see the difference in the bigger blocks like a 301 or 420 etc..
Back in 2018 my favorite channel on UA-cam was bleeping jeep and finally after a few years hhjh found your channel about mini bikes and I have a mm80 frame
Very cool comparison on the cams sir. I would love to see you do more videos on clutches and how to tune adjustable clutches and there effects on top end and also 0-30 MPH. I would also love to see the difference between a clutch for the average minibike compared to the serious all out racer!!! Great stuff man!👏🎥👍🇺🇸
I know this is unrelated, but I would love to see an experiment.
Tillotson 212 stock (electric start preferably)
Block Internals: ARC stock length con rod, mod 2 cam, stock pushrods and lifters, and stock piston, stock crank as well.
Head work: ported head, like 1.2mil over spec, 1.2:1 ratio lifters, 24lb valve springs, high compression gasket, stock carb with short manifold and long runner between the filter and the carb (like a snorkel or a 90* back turn to where the gas tank used to be over top of the block.)
Objective, takeoff speed, full rpm range of the torque converter, possibility to run powered accessories and have extra power over stock, perhaps the converter allowing for taller final drive ratio perhaps a custom 14t sproket on the driven pulley, and a 35t or 30t on the hub, greater top speed, with faster acceleration, and still keeping rpm down.
But I could be completely wrong with my theory.
External work: torque converter Tav2 30 series, stock electric start flywheel, with stator magnets and stator installed for headlights.
You're an intelligent motor builder.
That’s one hell of a mini bike! I could almost commute on a bike like that.
Love how he magically set that valve lash I thought I was on Crystal for a sec back there lol good speed wit the quickness
No crystal , just plain ol magic!! 😃😃
@Black66 love it man when I order the gts frame what color should I rock with u seen them in person
@Black66 I actually need a vid on it because I have some 22lbs ones coming in should I do the rope technique or take off the side cover
Cool bike
I want that exact bike!
U should put a volts pipe on there too!
How do you pull that starter I’m having trouble starting my stock ghost 212
I've been thinking about building a champion 224 for my colmam ct 200
Ohhh this should be good
Please do a video installing a speedometer on the mega moto 212 I can’t figure it out
@9:06 yeah it might be cheaper but I talk to people & seen the google reviews where people are not receiving their order and products from them 😢
Would I get more power of I took a 196 head, ported it out, used bigger valves, and bolted it onto my 212?
With governor intact?
I'm always looking for more power while being able to keep my nifty battery charging system and electric start.
My Coleman mini bike has a hard throttle any idea how fix it and loosen it up
I'm stuck between the volts Gts frame of a mini trike from rpc plasma cuts
So im adding a 308 cam to my 225rs it had 26lbs spring stock would i have to up grade to 37lbs springs
you should make a video comparing a ARC Billet rod and Flat top piston vs a LONG ROD AND SHORT PISTON!?
❤️❤️❤️❤️
What size crank bolt are you running on the 225 crankshaft? Is it 5/16-24 fine thread?
Yes, 5/16 fine thread.
Hey go power sports....sponsor this guy!
There are a few GPS sponsored videos on the channel. Here is one...ua-cam.com/video/FjX29xX4buU/v-deo.html
Worst mini bike company around 😆 🤣
Pretty cool dude
Would really like to see like a 30-50mph metric.
hey what type of chain breaker is it that you use? care to post a link to it? im looking to buy one...
Volt's mini bikes has that chain breaker on the web site.
Just found this channel. Building a predator 212 and I’m having a lot of vibration from the engine. Can you address this issue. Reading this is normal for a predator.
How did you like the 24mm carb on that bike vs the 28mm did you find one work better then the other? Wondering if the 28mm would be boggy down low
Check out the Mega Moto playlist. There are videos on there comparing the two carbs. ua-cam.com/video/5bziYNUJKyE/v-deo.html
youd get quicker 0-30 if you held the brake and stalled the converter.?
I try and keep the launch technique the same in every test just to try and keep things consistent for the parts comparisons. .
More duration at top speed.. means more air more fuel..better chamber filling and purge ....which makes more power ....
Your gearing is holding the top speed back.
Yes, I need to keep the gearing the same to keep the parts test consistent.
Did you have to cut the push rods?
No, I didn't. Check out the playlist for many more cam installs. ua-cam.com/video/xV8i59aGUao/v-deo.html
what kinda cluch is on there?
Here is the clutch video ua-cam.com/video/UjHi8-IPRy4/v-deo.html
can i buy that mini bike asap
Is the predator ghost faster out of the box stock or is the predator 224cc faster out of the box stock
The 224 has a governor out of the box so it might be slower but The 224 has more potential IMO because of the 58MM stroke and block. If you are going to have to buy billet parts for either engine and especially the ghost to get rid of the rev limiter then I would rather buy them for the 224. Even though the Ghost is a good engine. Nothing wrong with it.
@@Black66 great info I appreciate it !
Probably a good idea to shop elsewhere other than Paul's Karts.
yup
Why?
What is your timing for this cam?
i think I was using 32-34 in this video.
@Black66 I am running an ARC flywheel with 32 degrees of timing. I am also running the same 330 cam, should I add 2 degrees of timing? Thank you in advance for your help, I have managed to build 2 pretty respectable mini bikes thanks to your videos.
You need heavier springs 55lb duals+
You need some 10” wheels and some Dunlop 130/90-10 d180 tires. 19.2” tall. Get those a bike and compare that!
Why do these guys keep their cam specs secret? Why would i buy a mystery camshaft of undisclosed duration, centre lines or even lift on Pauls kart cam. Swap that Pauls head out and it'll go ever better.
Check out the Mega Moto playlist. We have tried many different cams and combos with this bike ua-cam.com/video/VbcpA0jdSIw/v-deo.html
Don't order this cam or any other parts from volts minibikes unless you wanna live to regret it like I and others have from what I've been reading. I've waited 2 months for my cam. Still haven't received it. Read on their facebook a post where another guy was still waiting for his parts after weeks. I finally ordered cam from somewhere else. I messaged them on Facebook, instagram, email and called them multiple times. No answer when I called or response to my messages!!! I finally had to call my my financial institution and have them try to deal with it. Been tons of fun and it was the only thing holding up my build up. Sucks I had to buy the same part twice and I might not even receive my money back from them according to my financial institution.
Sounds like shit 0-30 like it ain’t going no where stall set to high
i deff like the vids /builds but it tkes so much to get four strokes up on speed next to 2stokes .it cost st to much more for me but ye msn i like this build