How to Make a Spiral Statement Ring | Jewelry 101
Вставка
- Опубліковано 28 лип 2024
- In this episode of Jewelry 101, Susan shows you how to make a spiral statement ring when making rings at home. You can find supplies like the ones used in this video here:
Domed Chasing Hammer: www.jtv.com/product/dome-face...
Rawhide Mallet: www.jtv.com/product/deluxe-am...
Chain Nose Plier: www.jtv.com/product/two-k-ger...
Flush Cutter: www.jtv.com/product/xuron-tap...
Nylon Jaw Plier: www.jtv.com/product/wubbers-t...
Ring Mandrel: www.jtv.com/product/hard-chro...
Bench Block: www.jtv.com/product/steel-blo...
Flat File: www.jtv.com/product/eurotool-...
16ga Wire: www.jtv.com/product/16-gauge-...
Gemstone Beads: www.jtv.com/category/jewelry-...
Stay tuned for new episodes on jewelry making every Wednesday, here on Jewel School!
#JewelryMaking #DIY
Website: www.jtv.com/
Facebook: / jewelschool
Instagram: / jtv - Навчання та стиль
I rarely comment on videos but I must tell you, your videos are among my very favorites. You never belabor your remarks and I appreciate not having to watch an hour long video to get the same information that could be given in a much shorter time. Thank you for being so generous in sharing all your knowledge.
Thank you, Jeanne!
Your videos never go out of style. I’m finding them years later 😊
One suggestion; use your ring mandrel or ring bender to put a slight curve in your top statement coil, this will keep it from rocking or catching! I love this ring.
Love this video and your others as well! You are a great teacher and don’t spend a lot of time with unnecessary conversation. So excited to try many of the techniques you’re teaching! Thank you!
It would be nice to see a close up of the finished project. Looks like a nice ring but can’t really tell without a closer look,
I was just going to say the same thing! TY
@@sandyperchez5571 ..I
I agree video was not close enough
Yas so rite
Agreed, couldn't really see what Susan was doing.
Cute ring. I enjoy your videos, but it would be really helpful if you showed larger and extended views of your completed pieces, either at the beginning or end of your videos.
Love it! Thank you for sharing. I can't wait to try it
Fabulous and love the designs too.. love the ring💛💛💛💛💛
Thank you ,love the ring.
This is super cute! Love the design.
You are a wonderful teacher 🙏🏻
You are a good teacher and you’re obviously very competent at making jewelry. I wanted so much to get into your video because I’m interested in making rings like this, but you made it in such a way that there was no focal point. At the beginning I wasn’t sure really what the ring looked like. You never stopped and showed us the detail of the construction of the finished ring. Nor did you show us at the end. The finished ring itself was barely featured. I’m not sure how much I like the ring because I didn’t get a good look at it in the passing glimpses. Sure, I tried stopping the video, enlarging the ring but they were such brief glimpses that you only got one perspective. I respectfully suggest that at the beginning you show the ring I.e. turn it around...show the back...the sides etc. That’s just a suggestion but I think it will make a difference to viewers like me.
Agreed
@@donnar9864 I don't understand what you mean by "there was no focal point." The focal point is the bead in the spiral.
I agree we need more up close shots of the ring and all the pieces you put together your videos are my favorite because I like wire working and soldering but most of the videos don’t do enough up close shots so we can see the small details
Great thought and great performance. Thank you so much!
BEAUTIFUL idea thanks for sharing your talent❣
A hollo from Edinburg Tx
I love the videos that you have made. I like the way that you go step by step and let know what tools you are using.
Love this one. I’m trying it!
Love it 🥰 I think this would be a great start for a beginner like me
Love love love!!! You’re amazing. 🌈👍🏼🔨👌🏼❤️💜
Beautiful ring thank you for showing how to make it
Loved the tutorial. Very well explained!
Thanks, Iris!
Nice dainty ring. Thank you.
Susan, I love your teaching methods.
I like that there's no jabbering about unrelated topics. In just a few minutes I'm able to learn a new project to try and a new technique.
In this video you use a Wrap and Tap that is larger than the one I'm founding. Has this specific tool been discontinued? The largest I'm able to find is 20 mm being the largest loop.
Thank you for your videos!
I liked the video and the ring. Good job!
Love it! I need more tools! I love your videos xx
Thank you!
Muy original gracias por compartir tus creaciones saludos desde Reus Tarragona España.
Πολύ όμορφο δαχτυλίδι!
Θα προσπαθήσω να το φτιάξω...
Ευχαριστώ!!! 😘😊🇬🇷
τα κατάφερες;
Beautiful...
Maestra muy hermos Ring 💍 I love 😘 gracias por compartir 🙏🙏🇨🇴💓 saludos desde NOLA megusta mucho 💕 SUS tutorial.. I'm very happy
I like the ring my dear but can u plz show how to make a simpler/more delicate/dainty ring..as the arthritis in my hands/fingers don't let me do too much. I am a TRUE BEGINNER & LUV jewelry making sooo much!! TY! 💞 your vids
Very pretty, good lesson, thanks
Thank you ☺️ lovely
I really like this model is easy to make and cool look
Such a pretty ring. Need hammers & bench block
I enjoy watching your video’s.
You are amazing, lovely, thank You , i’ m portuguese🙏🙏🙏🥰🥰🥰👏🏻👏🏻👏🏻🌹🌹🌹🌹😘😘😘😘🇵🇹
Love love love
I love your videos. But I made the mistake of purchasing the wrong hardness wire. Wondering in further videos could you specify what hardness of wire you are using. Thanks that would help a ton.
Cute project :)
Love your videos but a close up view of the finished product would be awesome.
Super teacher!
You are the Best !!!
Great videos thank you. I have a question - can I hammer gold filled wire? Thanks for your response;)
Love this! I have 22 gauge, will it work? Thank you!
I love this. I just wish I could hammer the paddle ends like you. Mind look terrible.
I love your videos everything is so concise and I think you have amazing designs and teach really hellfire wire working techniques! I have a few questions and a couple suggestions. Can you please tell us the hardness of the wires and what shape you use? Also can you please show more close up shots and shots of the finished product? It’s hard to see the details. Also, can gold filled wire be used for this? I know plated wires can chip but how does gold filled hold up? Lastly can you list links for the supplies such as the mandrels and bail pliers and other tools?
Amanda,
Thank you for your comments! Check out our newer videos over the past year. We believe we have taken care of some of the viewing issues you're having with better closeups and backgrounds that make it easier to see the jewelry-making process. As for wire, this is a great suggestions and we are currently working on a Pro Tips video that will talk about all the different types of wire and their hardness and what's best to use for different typos of projects.
We don't currently have a ring mandrel in stock as it sold out very quick, but you might be able to do a quick google search and find one.
As for the other tools, here are some links:
Basic Tools:
www.jtv.com/category/jewelry-making/tools/_/N-817104130?mcid=XSOjsyt
Hammers:
www.jtv.com/search/?Ntt=hammer&type=products&N=4243964577&Ntk=All?mcid=XSOjsyt
Beads:
www.jtv.com/category/jewelry-making/beads/_/N-1547377695?mcid=XSOjsyt
Wire:
www.jtv.com/category/jewelry-making/wire/_/N-451581875?mcid=XSOjsyt
Again, thanks for watching!
Love this project, but do you want to say us if you take dead soft or half hard wire.
Thank you for your answer
I love this ring and I enjoy using different types of metal. Did you put the silver in LOS? And what grit did you use on the file? Your tutorial was great and I understood all of it. I have everything except the automatic wire rounder and wrap and tap which I am looking forward to ordering. Thank you so much.
Hi Cheryl! I used LOS on some parts of the rings. Here is a link to a great kit that contains liver of sulfer from JTV! Not sure the grit of the file! www.jtv.com/product/finishing-kit-incl-buffing-blocks-liver-of-sulfer-gel-protectaclear-spray/JMKIT591
Great Job, loved the technique and finished project. Where did you buy your wire rounder? Thanks
Wire rounders/bail-making pliers are awesome. Here's a link to the ones we have in stock at the moment: www.jtv.com/search/?Ntt=bail+plier&type=products&N=4243964577&Ntk=All?mcid=XSOjsyt
Have fun and good luck!
Susan, I love all of your tutorials. I have learned so much. Is 14 gauge sterling silver good to use instead of 16 gauge? Round or half round? Thanks!
Hi Carmen, depending on the look you want, round and half round can both work. And as far as gauge goes, it just depends on how pliable you want your wire to be. The thicker the wire, the more difficult to manipulate but you should give it a go and see what you think!
Hello nice class. Where can I find the wrap and tap tool?
Hi Susan! I'm new to jewelry making and love your videos! I want to try making my first ring but all mandrels I'm finding have a flat spot on them where the measurements are...best I can tell your mandrel is completely round with the measurements stamped on it...where did you purchase yours? Thanks for all the great videos!
Hey Susan! The groove that runs the length of the mandrel is actually going to be much better than you think. This groove is designed to help hold your bead in place while you wrap your wire. Some older mandrels don't have it (like the one Susan is using), but have since been redesigned to include it. If you're still worried about it, don't be. The other side of the mandrel doesn't have the groove and will be a versatile working surface as well. It won't hinder or change your design as far as size at all. Hope this helps and good luck!
what is a wire resistor? I can't find it on Amazon.
Great work... I'm learning so much...can u do a tutorial on working with flat wire to make rings?
Great suggestion!
For the 16 ga Sterling, do you recommend Dead Soft or Half-Hard?
Hi Dana! I recommend using Half-Hard.
Where can I find your "wrap & tap" pliers? They don't seem to be available on the jtv.com web site.
Agreed can’t find them anywhere but Amazon end I’m not entirely sure they are the same ones
Please zoom in on what you're doing
Where exactly do we go to purchase your supplies?
I couldn’t see how you strung the wire at the end. Did you wrap on the inside ring?
Hi Rob! You weave the smaller gauge wire around the spiral ring to keep everything in place. When you're happy, use your pliers to pinch into place and keep any rough or sharp spots from rubbing against the finger.
I have a 26 gage wire but is very hard to work with.
Hi. Love your videos. With the sterling silver wire is this dead soft or half hard wire
Hi! It is half hard.
@@JewelSchool thanking you
Searching everywhere for your wire rounder can't find it where did you get yours and what is the actual name of it?
This is a Beadalon Bead Reamer. It requires batteries. You also need to get the burr attachments to go with it. They are available on Amazon.
Does this video have a supply list?
Hi! This is an older video, so the supply list needs to be updated. Thanks for bringing it to our attention! Here is everything we currently have in stock as it pertains to this video. A quick internet search should get you to everything else we don't have!
Domed Chasing Hammer: www.jtv.com/product/dome-faced-chasing-hammer-features-a-large-face-for-striking-chasing-tools-or-flattening/JST486?mcid=XSOjsyt
Rawhide Mallet: www.jtv.com/product/deluxe-american-made-rawhide-mallet-size-2-face-diameter-of-1-5-inches/JST485?mcid=XSOjsyt
Chain Nose Plier: www.jtv.com/product/two-k-german-4-1-2-chain-nose-pliers/PLIER131?mcid=XSOjsyt
Flush Cutter: www.jtv.com/product/xuron-tapered-head-micro-shear-tm-flush-cutter/PLIER120?mcid=XSOjsyt
Nylon Jaw Plier: www.jtv.com/product/wubbers-tm-proline-nylon-double-flat-nose-plier/PLIER110?mcid=XSOjsyt
Ring Mandrel: www.jtv.com/product/hard-chromed-ring-mandrel-sizes-1-15/JST719?mcid=XSOjsyt
Bench Block: www.jtv.com/product/steel-block-2-5x5-5x-75-inch/JST655?mcid=XSOjsyt
Flat File: www.jtv.com/product/eurotool-tm-student-file-set-includes-6-half-round-file-6-flat-file-and-handle/JST825?mcid=XSOjsyt
16ga Wire: www.jtv.com/product/16-gauge-wire-kit-in-assorted-colors-40-feet-total/JSKIT0762A?mcid=XSOjsyt
Gemstone Beads: www.jtv.com/category/jewelry-making/beads/_/N-1547377695?mcid=XSOjsyt
What was the name of the tool you used on the ends of the wire? Before you hammer it flat
This is called a wire rounder. It is also a bead reamer. This tool has interchangeable heads depending on your need. It's a great tool!
www.jtv.com/product/bead-reamer-and-wire-rounder-attachments-kit-incl-bead-reamer-and-assortment-of-burs/JSKIT0559?mcid=XSOjsyt
could this be done with a square shaped spiral?
We don't see why not! Give it a try and let us know how it turns out!
Wow 😳 where is the finished product
A meat tenderizer would work for the texture hammer
Another great project but please ask whoever is filming your videos to get closer so we can see the details.
I use a highlighter as my ring mandrel.
What kind of 26 gauge wire did you use?
This is called Parawire. It is a premium quality tarnish resistant round silver toned wire, a 10 yard spool approximately.
I wish you could make some beaded bracelets
What kind of beaded bracelet are you looking for? Here are some tutorials that might interest you:
Making an Easy Stretch Charm Bracelet: ua-cam.com/video/bVOkTYXpJ7U/v-deo.html
How to Bead Loom Colorful Bracelets ua-cam.com/video/Cu-8t97K2Ns/v-deo.html
How to Make a Daisy Chain Beaded Bracelet: ua-cam.com/video/weURYWRtPGg/v-deo.html
Making a Simple Chip Bead and Pearl Bracelet: ua-cam.com/video/LWqbp0Sn2QA/v-deo.html
Memory Wire Cuff Bracelet with Beads: ua-cam.com/video/jgRU9w_SmfM/v-deo.html
Adjustable Friendship Bracelet, Beaded: ua-cam.com/video/BCSQhpUNxv0/v-deo.html
That was really hard to see where you wrapped it to the ring part I couldn't see it!
Using these wires will they make your finger green?
They can. Metals often interact with the oils in your skin and sometimes lotions and that can turn your finger green. You can get a jewelry sealer that will help coat the metal and will keep your finger from turning green!
Don’t see a notification bell!
There is a clock ticking sound that I hear on these videos. It is disconcerting. And detracts from the lesson.
I have just been watching several of your videos. Great tutorials, but it is so frustrating that you never show the completed ring well. In this video, not at all. All that time watching the video and you don't get to see the final product.
Check out some of our newest videos. We now start off by showing you the project and then recap the look at the end. We are continually trying to make viewing a more enjoyable experience! Thanks so much!
I can never see what you are doing. Obviously a great jeweler, but the videography needs to improve before I can follow what you're doing. 💗
Completely agree nothing is up close enough we need an overhead camera close up
Ok u lost me
Don't give up!
My eyes are not that good to see it. I use a magnifying glass when I work and it's great..but maybe you can show an up close version of each step??
Have to zoom in and let us see it for a few seconds. YOU know what you are doing. We don't. "Baby" us a little. bit...zoom in. Love your video tho.
Your background music is ANNOYING