Moving Metal (Part 1) - I purchased my very own pipe expander!
Вставка
- Опубліковано 13 вер 2024
- I've needed one of these for a few years now, and the downpipe project has kind of necessitated the need to purchase one. This should make doing exhaust and other pipe work a heck of a lot easier, as I won't have to cut sockets off of other pipes and reattach them.
Pipe Expander:
www.amazon.com...
Air-over-hydraulic pump:
www.amazon.com...
I did have to make my own fitting to adapt the ram to the air pump. I'm told it's a "douty" type fitting though, if you have better luck than I.
I've now got my own website:
www.208concepts...
Follow me on Facebook, Instagram and TikTok:
/ turboranger208
www.instagram....
vm.tiktok.com/...
Come hang out and BS with me on Discord!
/ discord
If you're feeling generous, feel free to donate to PayPal or Patreon:
www.PayPal.me/m...
/ turboranger208
#fordecoboost #customexhaust #customparts
Well now I wanna see it hooked to the air hydraulic pump hahaha.
Going out tonight to see if I bought the right fitting 👀
You are everywhere on UA-cam
Me or 802? 802 definitely is 🤣
@@208Concepts 802 is everywhere 🤣
@@ThatV12MiataBruh Hahaha ya got me. Good ta see ya.
I did a video of this a year or so a go..stainless is the hardest to do mild steel will be very easy but either way you must rotate the pipe 1/4 turn or so to get a round result adding the air/hydralic pump makes very good but you still need to take your time with stainless... Also the hole punch kit you use may have a different thread on the forcing screw so its best to check it before you buy the kit. I used the astro pipe expander and the HFT early version hole punch kit to make mine and still works well today.
Good tip on the hole punch kit. If it comes down to it, I can make my own adapter on the lathe though 🤣.
As for the expander, I did figure that out and got fairly good at using it for my needs.
Thanks for posting
You’re adapters make me feel some type of way..
😂 me too. they're just so nice....
Where did you buy this from?
Amazon. I'll put the links in the description later tonight
I forgot to post links. Let me do that right quick 🤣
So basically the hand pump is garbage and don't buy it
I wouldn't say garbage, just that it struggles with stainless. It worked on aluminum great, and I imagine aluminized steel would be fine too.