I think there are some tuners that can completely disable it. Other than that you could run a toggle switch from the abs fuse so you could just click it off.
To truly use the BLD, you need to mildly apply brake while ALSO applying the gas peddle. It will make a funny sound which will tell you it is working. It works great when you get stuck and one wheel spinning. You will then have power go to the non spinning wheel
Well what you're saying might help slightly it definitely contradicts the owner's manual and the BLD works well without hitting the brakes and putting additional stress on your drivetrain and wasting power. Hitting the brakes is also going to add resistance to the non-spinning wheel..
@@MudPuppyOffroadyeah it’s going to apply the brakes to both sides evenly- on a open diff this means it will cancel out. On some other types of diffs maybe adding brake force would multiply power added to the other side but not on open diffs like a jeeps I don’t think.
Dude haha I was just complaining about lack of power in the snow ! That’s sweet to know 4H can turn off traction and stability control and get full power in 4L that’s huge ! Thanks for making the vid
Dude this has pissed me off some much thank you I didn’t know this at all it’s like I have no power in 4low if you find anything else out post a new video
I have 2020 with 8spd auto transmission. He is correct on mode selection. But in 4 low if it starts from a stop in second. You can go manual and shift to low 1st. But if the low 4 is selected then in low manual 1st and 2nd the TCS is still on and it even if you floor it, you can't burn out in either gear. But if you go to 4 Low 3rd gear then the computer will not cut throttle and you get full power and can smoke the tires all 4.
Glad you are able to disable by pressing and holding the TC button. I wish I could do the same on my ‘18 grand Cherokee but they didnt allow it. So frustrating.
Jeep forum people are generally some of the least knowledgeable on earth, in my experience. I'd be looking for a fuse or relay to pull that shuts all the BS off.
Bruhhh that was awesome. Information I did not know. I was pissed at the 4wd low not revving also there's some issue with it not breaking? Could it be?
On my 2021 Gladiator as soon as I put it in 4L traction and stability control turn off I think it turns everything off in 4H as well but I can’t remember.
I mean, I'm sure that's what you think is happening... That's what the lights would indicate but if you test it there is still some torque limiting happening unless you put it in it to manual mode first gear. This is a well-documented thing
ESC will only turn off in 4 wheel drive because you are telling the system to lock up the differential and it knows that you're trying to go through some bad shit off roding If you want it completely off then you have to mod your CPU a bit and use different Bluetooth OED2 apps to Customize your truck/jeep
I want to thank you for sharing the moving from auto to manual tip. I got stuck in a mud hole for a bit and had no idea while I could not get wheel spin. I am a newbie was trying different things, things I thought I learned…but did not log all my actions, but now that I think about it, I may have moved to manual…I have been looking into it for months without new insight until tonight…thanks again!
When your in 4H put it in neutral, engage e brake then drop it into 4low 😎 make sure your seatbelt is on cause the truck won’t move if it’s off. At least that’s the way it is with my 21 gladiator rubicon 👍
@@mfh2112 the more you shift it the easier it will get. Mine stock was super stiff to shift. Now it’s like butter and can be shifted stopped 4/5ths the time.
Have you had any issue in reverse ... My Mojave doesnt wanna come out of traction control in reverse even if OFFROAD Mode + is activated in 4 LOW ... I dont understand !
Man that is really frustrating I never really experimented with reverse. I'm back in a Toyota now and very happy to be able to turn offMan that is really frustrating I never really experimented with reverse. I'm back in a Toyota now and very happy to be able to turn off all of the traction nannies
Just a thought, but what does going back into 2hi do after disabling ESC in 4hi? Haven't tried it in my Gladiator because I just saw your video on this, haha
at 4:05 you were talking about holding the button in for a minute - then it "broke". You were being punished by some smart ass developer who knew people would make the leap from 5 seconds to a longer duration, and wanted to congratulate (give you the finger with a smile) to congratulate you for trying the hack. Fun times. Keep in mind though... If someone drops an Easter egg on you for something like that, probably, there is another Easter egg built in to do EXACTLY what you're trying to do. Go find it. On second thought - could be a dumb bug. ;)
![Jeep Traction Control vs Axle Locks [Expert Advice]](http://i.ytimg.com/vi/R0IwAiXBcUc/mqdefault.jpg)
Tazer JL Mini can give you full ESP off in any mode. And like 50 other features.
Can't thank you enough for sharing your knowledge learned from experience, really appreciate you posting this! Keep up the strong work!
I think there are some tuners that can completely disable it. Other than that you could run a toggle switch from the abs fuse so you could just click it off.
the esc fuse on the jl controls your power steering as well for some dumb reason
To truly use the BLD, you need to mildly apply brake while ALSO applying the gas peddle. It will make a funny sound which will tell you it is working. It works great when you get stuck and one wheel spinning. You will then have power go to the non spinning wheel
Well what you're saying might help slightly it definitely contradicts the owner's manual and the BLD works well without hitting the brakes and putting additional stress on your drivetrain and wasting power. Hitting the brakes is also going to add resistance to the non-spinning wheel..
@@MudPuppyOffroadyeah it’s going to apply the brakes to both sides evenly- on a open diff this means it will cancel out. On some other types of diffs maybe adding brake force would multiply power added to the other side but not on open diffs like a jeeps I don’t think.
I watched a lot of video from experienced offroader. And they all say the same low range should be done in manual mode. Thanks for that video
Dude haha I was just complaining about lack of power in the snow ! That’s sweet to know 4H can turn off traction and stability control and get full power in 4L that’s huge ! Thanks for making the vid
The tazer mini let's you enable off road plus in 2 wheel drive at least with the turbo diesel
Dude this has pissed me off some much thank you I didn’t know this at all it’s like I have no power in 4low if you find anything else out post a new video
Very good info thanks keep up great vids 👍same with spring swap
The reason why it doesn't do anything when you long press it in 2 HI is because you're in Drive. You need to be in Park or Neutral :)
Tried that obviously... Nice try though
Can’t completely disable in 2wd unless you pull the fuse or get a race tune from Greene racing and I’m not sure if he can tune new gladiators yet...
Most dodge ram products in 4low should by pass it all
My 2011 ram 1500 terns it off automatically and shows that the system is off on the dash
I have 2020 with 8spd auto transmission. He is correct on mode selection. But in 4 low if it starts from a stop in second. You can go manual and shift to low 1st. But if the low 4 is selected then in low manual 1st and 2nd the TCS is still on and it even if you floor it, you can't burn out in either gear. But if you go to 4 Low 3rd gear then the computer will not cut throttle and you get full power and can smoke the tires all 4.
Glad you are able to disable by pressing and holding the TC button. I wish I could do the same on my ‘18 grand Cherokee but they didnt allow it. So frustrating.
Jeep forum people are generally some of the least knowledgeable on earth, in my experience.
I'd be looking for a fuse or relay to pull that shuts all the BS off.
Bruhhh that was awesome. Information I did not know. I was pissed at the 4wd low not revving also there's some issue with it not breaking? Could it be?
On my 2021 Gladiator as soon as I put it in 4L traction and stability control turn off I think it turns everything off in 4H as well but I can’t remember.
I mean, I'm sure that's what you think is happening... That's what the lights would indicate but if you test it there is still some torque limiting happening unless you put it in it to manual mode first gear. This is a well-documented thing
Hey mudpuppy. My mom posted on the facebook group about the 300. Can you please get back to her im interested.
Thank you
ESC will only turn off in 4 wheel drive because you are telling the system to lock up the differential and it knows that you're trying to go through some bad shit off roding If you want it completely off then you have to mod your CPU a bit and use different Bluetooth OED2 apps to Customize your truck/jeep
I want to thank you for sharing the moving from auto to manual tip. I got stuck in a mud hole for a bit and had no idea while I could not get wheel spin.
I am a newbie was trying different things, things I thought I learned…but did not log all my actions, but now that I think about it, I may have moved to manual…I have been looking into it for months without new insight until tonight…thanks again!
I always go to manual when wheeling in mud or snow
Tazer will allow you to do it in 2high
So bld does work in 4 hi as long as you don’t touch the traction control button?
How the hell are you able to shift from 4H to 4L without moving?
It helps to be moving just barley but mine will shift stopped
@@MudPuppyOffroad I'm jealous.
Mine too Gladiator Sport S
When your in 4H put it in neutral, engage e brake then drop it into 4low 😎 make sure your seatbelt is on cause the truck won’t move if it’s off. At least that’s the way it is with my 21 gladiator rubicon 👍
@@mfh2112 the more you shift it the easier it will get. Mine stock was super stiff to shift. Now it’s like butter and can be shifted stopped 4/5ths the time.
Manual mode limits power after enough spinning. It drives me nuts
Have you had any issue in reverse ... My Mojave doesnt wanna come out of traction control in reverse even if OFFROAD Mode + is activated in 4 LOW ... I dont understand !
Man that is really frustrating I never really experimented with reverse. I'm back in a Toyota now and very happy to be able to turn offMan that is really frustrating I never really experimented with reverse. I'm back in a Toyota now and very happy to be able to turn off all of the traction nannies
Just a thought, but what does going back into 2hi do after disabling ESC in 4hi? Haven't tried it in my Gladiator because I just saw your video on this, haha
Yes you have to reset it
All the know it all 14 year old will be like ...” if you change the oil it should work my dads did “ 💀💀
Interesting, my Rubicon can start off in 4th gear low range.
that's interesting. perhaps it has to do with Rubicon gearing
I didn’t understand a word you said
Lol I find that hard to believe in any case no one made you watch it
You just confused me more.
Lol jeep yours on pavement then like most jeep guys
@@MudPuppyOffroad then can I ask you to make a video for beginners?
That make sense for thousands of us 🇺🇸
And that's just USA.
How much for your Honda 300 I Reilly want it
4k no tires just wheels
@@MudPuppyOffroad that I cheep u could get 6k easy
@@5.9_Justin_24v shhhhh dont say that ok
If in 4L and manual shifter, dose it force shift when you have very high rpm ?
Yes up to 3rd or 4th gear i think then it holds that gear
at 4:05 you were talking about holding the button in for a minute - then it "broke". You were being punished by some smart ass developer who knew people would make the leap from 5 seconds to a longer duration, and wanted to congratulate (give you the finger with a smile) to congratulate you for trying the hack. Fun times. Keep in mind though... If someone drops an Easter egg on you for something like that, probably, there is another Easter egg built in to do EXACTLY what you're trying to do. Go find it. On second thought - could be a dumb bug. ;)
Lol sold it for a reason