Looks pretty good for your first try. I have seen other videos of this process but they don't go into too much detail. I like how you show your mistakes as well, it helps others to learn and have more confidence to try it themselves.
Good Morning Yuuka from the U.S.! Love how consistent you are with your uploads. I can always count on your vids on my rides to work on the train. I think that with a bit more sanding, color correcting, and a paint job, you will begin to see your desired finish product! Keep going Yuuka! U got this! Love 💘 your video as always! Until next week
You are right my friend. What I like with this video is her zeal dedication on her passion which is model kit building. With constant practice I think she can achieve the desired effects she wants to get in her models. And I am happy to see that happen.
@@yucaend Yes, I pretty much always do! Love watching a cute girl pour her craft into making the best gunpla she can! No better way to start a Saturday morning in my opinion! 🥰
First im learn with thinner to melt that runner, it won't work. Then I use tamiya glue, it work. But better using tamiya putty. Smooth result 👌 👏 👍 when sanding. Nice sharing yuca🥰🥰👏🏻👏🏻 💗 you always
It’s awesome to know about this process when learning to build gunpla. I didn’t find out about this technique until this year after building gunpla for 5 years..🤦🏾♂️
Nice, I never learned that the plastic left behind can be used like this, making a coloured glue! I am a beginner also, and I learn to apply glue direct onto the plastic. Where did you learn your skill? Like your video
Wow! Your getting better in this craft, by the way about the gate mark you can damp a little amount of cement on white marks to remove it and sand it after. happy building!
You can use Tamiya airbrush cleaner (ITEM# 87089) instead of tamiya extra thin to make putty. It is much cheaper. You can also use airbrush cleaner as extra thin cement.
Making sprue glue just takes practice to get the balance right as for the part separator wave does a decent version ,once you get used to the technique you'll get faster at clean up and any mistakes or gaps can be fixed/repaired by adding a bit of the mixture to the area and sanded down ( I used the technique on my PG zaku )
Runner Putty? Interesting Idea ))) Thanks For Putting Up the Informative Video. Also That was A Pretty Cool Shirt You Modeled at the end of the Video! =)
Fabulous, the Gouf looks really well after processing by you. I want to try based on your instruction but it looks very difficult to me. Thank you for your sharing 🥰
Very cool, I'm gonna have to try this. It looks like it takes a lot of patience. Tell me you didn't do this all in one sitting. 😵 very nice shirt too it looks awesome. 👌
ランナーパテに初挑戦するので参考にさせていただきます!
Good progress
thank you☺️
very nice
カワイイの一言だな。。
Hai una voce ipnotica. Comunque sei molto metodica nei tuoi lavori. Nonostante non capisca il giapponese guardo i tuoi filmati molto volentieri
Mi sento anche assonnato con la mia voce😂
@@yucaend hahaha ipnotica in senso buono, non da addormentata
すっかり週末の楽しみになりました。こえもかわいいし、ほんわかした感じでいいですね。
癒されます。
ありがとうございます☺️♪
ここまでやるとはさすがです。自分は作ったら終わりです
それでも十分にかっこいいですもんね😊
@@yucaend 一緒に作ってみたいです
i just use super glue
ランナーパテ作ってみたくて見にきました。
分量とか、ちょっと難しそうですね‼️
ビン買ってきて何種類か作ってみますね。
今日も優しそうで素敵です。
ガンプラもどんどん上手くなっていく
ありがとうございます☺️
大成功
ありがとうございます😊
丁寧な作業と 美声
ありがとうございます😊
私も最近ガンプラ制作を始めたのですが、素組みでもゆうかさんみたく上手に組む事が出来ずに苦戦したので、塗装にまで挑戦出来るゆうかさんは尊敬しますわ。
組み立ても早送りしているだけで結構時間かかってたりします🤣
とにかく、ホンマにいつも可愛いー!
ありがとうございます☺️
Looks pretty good for your first try. I have seen other videos of this process but they don't go into too much detail. I like how you show your mistakes as well, it helps others to learn and have more confidence to try it themselves.
I hope my failure gets used to your help😊
プラモは細かい作業みたいで、
難しい作業に思いますが。
作業をきちんと完了されてて、
すごいなと思います。
ありがとうございます☺️
Good Morning Yuuka from the U.S.! Love how consistent you are with your uploads. I can always count on your vids on my rides to work on the train. I think that with a bit more sanding, color correcting, and a paint job, you will begin to see your desired finish product! Keep going Yuuka! U got this! Love 💘 your video as always! Until next week
You are right my friend. What I like with this video is her zeal dedication on her passion which is model kit building. With constant practice I think she can achieve the desired effects she wants to get in her models. And I am happy to see that happen.
Are you watching on the train? Thank you! The advice was also helpful😊
Thank you! I'm glad to know that your enthusiasm is transmitted😊
@@yucaend Yes, I pretty much always do! Love watching a cute girl pour her craft into making the best gunpla she can! No better way to start a Saturday morning in my opinion! 🥰
すごく時間と根気のいる作業ですね
ゆうかさんの集中力には感心します
たいへんお疲れさまでした 今日も綺麗です!
ありがとうございます♪集中力がある方で良かったです😂
片寄ったやり方ですが、600→1000→2000でヤスってます。(笑)
いつもは、セメントで直接パーツを圧着してやってます。
ランナーパテは使ったことないですが、チャレンジしてみたくなりました!(。-∀-)
解りやすくて丁寧ですね!声も優しく手も綺麗でお洒落コーデ!💖💯ですね!
ありがとうございます☺️
いつも楽しみに見ています❗️
パテって難しそうだなって思っていましたが、動画を見てやってみようかと思いました❗️
とても勉強になりました😃
これからも応援しています❗️
自分はカッターで角取りしたりしてるのでデザインナイフの方が出来がより良くなるんだなぁって勉強になりました✨
First im learn with thinner to melt that runner, it won't work. Then I use tamiya glue, it work. But better using tamiya putty. Smooth result 👌 👏 👍 when sanding. Nice sharing yuca🥰🥰👏🏻👏🏻 💗 you always
thank you for the advice😊
It’s awesome to know about this process when learning to build gunpla. I didn’t find out about this technique until this year after building gunpla for 5 years..🤦🏾♂️
It seems to be a good way to finish without painting! Videos of other people who are explaining in detail are also posted😊
合わせ目消しや塗装が上手くできると楽しそうですね😄
塗装も楽しそうですね😊
Love to watch your next video and watching you working 💖💖💖💖💖💖
Thank you for watching😊
It's a very good way. Great to try and use. Thank you.
Thank you! Please try it😊
細かい作業でもお上手ですね!手先が器用になりそう♪♪
細かい作業は好きです🤗
01:00まで🕐忙しいup😳お疲れ様でした。気をつけてください☺️ 最終の⭐️は可愛い好きる🤣
ご心配ありがとうございます😊
時間掛かるし大変な作業だなあ😣
お疲れさまです😀
ゆうかさんの声に癒されました😀
ありがとうございます☺️♪
ランナーパテって、上級者向けの凄く難しいイメージがありました‼️
それに挑戦するゆうかさんに尊敬の念しかありません🤩
私ができたので誰でもできることの証明になりましたね😊(難しいですけど笑)
ゆうかサン😄
動画アップありがとーございます✨
今回も初挑戦の技ですね✨上手くいってもいかなくても 毎回
謙虚に取り組む姿勢に癒されます😁これから暑くなると思うので、お身体大事にして楽しんでの動画アップよろしくお願いいたします✨
Great job 👏
グフカスタム かっこいいですね☺️🎵 俺も大好きで何度も作りました😃 次の動画も楽しみにしてます😃
ランナーパテで合わせ目消しなんて本格的になって来ましたね😊自分も工具はスジ彫り堂ですよ👍
スジ彫りさんの道具揃えたくなりますね😊
Keep up the good work ms.yuka 😊
7:45スジボリ堂も兜を脱ぐ、見事な縦一本筋モールド。
😮😍
ガンプラ奥深いですな〜
本当に尊敬します!!
あと、本当にご無理なさらずに🥺
無理はしてないですよ♪ありがとうございます😊
しゅうまつのゆうか それならよかったです😊
暑い日が続きますのでお身体ご自愛ください。
刮的很乾淨呢,蠻喜歡看妳改造鋼彈的,特別細緻有字幕帶講解!覺得自己上漆色作品會更棒..
我很放心,似乎很乾淨☺️
お久しぶりです👋😃動画更新楽しみにまってました。だんだんマニアックになってきましたね😀
ありがとうございます♪マニアックでしょうか😳
ヤスリの選択マニアックですよ✌️😀
Nice, I never learned that the plastic left behind can be used like this, making a coloured glue! I am a beginner also, and I learn to apply glue direct onto the plastic. Where did you learn your skill? Like your video
I've done the same thing since I ran out of Tamiya putty, except I use bamboo skewers to apply it.
新しい事にチャレンジしていく姿勢が素敵ですね。私も何かにチャレンジしてみようかな・・・w
たまには挑戦もいいですよね😊
@@yucaend お盆休みにシーフードカレーを作ります! お気に入りだったお店げ閉店して食べられなくなったので、これはもう自分で作るしか・・・w
本当に08好きなんですね😄
戦争の悲惨さ卑劣さを見せつけられた作品だけど最後に穏やかな時を過ごすシローとアイナ見てこの二人には永遠にこの時の中で過ごしてほしいと思いました。
お上手でしたよ!
地味な作業ですよねー^ ^
おまけも星マークが逆にエチエチな感じで😍
地道な作業でした😂
お疲れ様です。
どんどん深堀して凄いですね。
技術も上がって、勉強になります。
私もランナーパテ使ってみます。
ガレキに応用できればいいな。
ガレージキットではどうなんでしょうね😳
試してみたいと思います。
次の動画も楽しみにしております。
暑い日が続きますので、おきを付けてください。
可愛い❤️さらにできるようになったな❗👍
ありがとうございます😊
Colonel Norris would be proud. 😁
I'm glad to hear that☺️
忙しい中アップお疲れ様です♪ どんどんレベルアップですね💪
ありがとうございます😊
Wow! Your getting better in this craft, by the way about the gate mark you can damp a little amount of cement on white marks to remove it and sand it after. happy building!
ほぼ同じ時期にプラモ初心者だったのに、すっかり追い越されてる・・・
ランナーパテとか、すごいことやってるー。
ランナーパテは配合が難しいんですね🤔
今度やってみます!!
Practice makes perfect. Keep up the great work.
There is only practice😌
looking good Yuca
also your no zaku is cool
thank you😊
You can use Tamiya airbrush cleaner (ITEM# 87089) instead of tamiya extra thin to make putty. It is much cheaper. You can also use airbrush cleaner as extra thin cement.
I heard that method for the first time!
Making sprue glue just takes practice to get the balance right as for the part separator wave does a decent version ,once you get used to the technique you'll get faster at clean up and any mistakes or gaps can be fixed/repaired by adding a bit of the mixture to the area and sanded down ( I used the technique on my PG zaku )
Practice is important😌
ノリス大佐も喜んでくれてるさ☺️お疲れ様です👍
だと私も嬉しいです😆
3M研磨海棉也是不錯的選擇,研磨時沾點水效果會更好
感謝您的意見😊
This was a very cool video! Thank you!
thank you too😊
ランナーパテ良いですね😃
私は普段無塗装で楽しんでいるので、ランナーパテは試したいと思っていましたし、扱ってくれて嬉しいと感じています。また、週末を楽しみにしています!
お・ま・け、の前に広告動画が入るんですけど(笑)最後まで見てますよ😃
無塗装でもワンランク上をめざしたいですよね😆
おー、これがランナーパテですか……ゆうかさんのガンプラ作成っていろんなこと積極的にやっててすごいと思います。自分の参考にもなります。あと服全般的に着こなしてて好きです
ありがとうございます😊これで失敗したらとドキドキしながら頑張ってます🤣
Your technique is getting more advanced. Ganbatte!
Thank you! I will do my best in the future😊
今はユーチューバーの中で一番楽しみにしてます。
わぁ!ありがとうございます😳
😃
😊
Thanks for the English Subtitle, really appreciate it
組上げたら キレイに出来てる✨もう職人だね💪笑😍今回のおまけも👍でした。星⭐が気になるな~😍
職人はまだまだですが徐々に成長して行けたらとおもいます☺️♪
ゲート跡のところもランナーパテちょんちょんと盛って削ってやれば、白くなってる部分も消せるんじゃないですかね?
おつかれさまです。
いろいろ実験さんになっておられますね。
参考になりました。
手をかけたぶん、愛着も深まったことでしょう。
参考にしていただけてうれしいです😊
レベル高すぎてついて行けてないけど笑 小さい頃スプレーで色塗って作ったくらいで満足してた笑 凄いな~⤴︎知ってるプラモデルと知らない作り方!そして魅力的な美女!癒される🤣
スプレーで塗るのもすごいですよ😆
ゲート跡はランナーパテで使った緑蓋をちょん付けすると消えるみたいですよ!
チャレンジ精神がすごい😁
ありがとうございます☺️
이런 방법도 있네요 잘봤습니다
찾아 주셔서 감사합니다😊
自分はパチ組なので、合わせ目消しとかすごいなぁー🎵
それでも十分かっこいいですよね🎶
ゆうかさん、いつも配信楽しく拝見させて貰ってます。これからも体調に気をつけて頑張って下さい!
またの配信楽しみにしてまーす❤
The joins were very well hidden... and that’s a good technique for unpainted models.
I wanted to finish without painting, so I'm glad that you say so😊
@@yucaend It looks very neat and tidy... an advantage over using putty :)
ランナーパテは自分もやりますが 接続ピンを短く切っておくと良いですよ 後ゲート跡は流し込みボンドを塗っておくと白く跡になりづらいのでオススメです
合わせ目消し、凄い技術ですね。初めて見ました、塗って削ってコダワリを感じました。頑張ってください。
ありがとうございます☺️
待ってました〜✨
お待たせしました😉
これはとても大変な作業だったんですね、、、。
夕方から夜中までノンストップはさすがです笑 お疲れ様でした😂
グフカスタムかっこいいですね😉
大変だったけどカッコよくできて今はほっとしています😊笑
Runner Putty? Interesting Idea ))) Thanks For Putting Up the Informative Video. Also That was A Pretty Cool Shirt You Modeled at the end of the Video! =)
Some people have posted a detailed video of runner putty, so please check it out😊
Thank you oneechan for information.
thank you too😊
looks good
thank you😊
Thanks for the new video!GJ!
声も素敵ですが🎵……
手タレになれる位、指が綺麗✨
あとナチュラルな、ネイルの仕上げが
良いですね🤗
これからも頑張って下さい🎶
Fabulous, the Gouf looks really well after processing by you. I want to try based on your instruction but it looks very difficult to me. Thank you for your sharing 🥰
Thank you for watching this☺️
Thank you for one more nice video Yuuka.. 😍😍😘😘🙏🏻🙏🏻
I am the one who should thank you😊
@@yucaend it's okay I'm happy if you are happy 🤗🤗
お疲れ様です^^ランナーパテは使ったことないですけど、参考になりました^^
どんどん新工具増えていきますね^^ヤスリがけはガンプラの基本みたいな所があるから
やっぱり手を掛ければ掛けるほど良くなるし、愛着も湧くと思います^^
次回の動画も楽しみにしてます^^良きガンプラライフを^^ノシ
新しい道具はワクワクしちゃいますね🤗
そう!使いたくなっちゃうんですよね!
楽しく作業してると自然と技術も付いてきますしね(笑)
どんどんガンプラ製作が上手くなっていっていますね!
うまくいってるようで良かったです😊
合わせ目消しお疲れ様でした😃
地味で大変だけど、手間をかけた分、仕上がりが良いですよね❗️
あと、ヤスリがけは押し引きするよりも押すだけか、引くだけでやると綺麗になりますよ👍
一方通行の方がいいのですか、初めて知りました😳
けしからん!
プラモじゃなくゆうかさんをみてしまう!
ありがとうございます🤣
凄いですよね〜
ありがとうございます😊
凄い。
どんどん進化してますね。
現状でもつや消しクリアーを吹くだけで更に良くなりそうです。
もうすぐ塗装ですね(笑)
塗装のためには環境整えないとですね🤣
本格的な設備は高額だしスペースもある程度必要になりますから、最初はコンパクトで安価な物からで良いと思います^_^
最近は便利な道具が多いですよね。
合わせ目消しって楽しいですよね😉
4:02 is heaven
自分が出来ない事を、ゆうかさんは色々挑戦して益々プロに近付いてきましたね❗❗ゆうかさんの動画、今後が楽しみです😆🎵🎵
ありがとうございます😊プロは遠そうです💦笑
Very cool, I'm gonna have to try this. It looks like it takes a lot of patience. Tell me you didn't do this all in one sitting. 😵 very nice shirt too it looks awesome. 👌
ゆうかさんお疲れ様です🍵合わせ目消し苦手なので参考になりました🙇♂️完成度を上げるためにチャレンジするゆうかさん素敵です✨色々手を加えると、その分愛着もわきますよね😊次回の動画も楽しみにしています🎵
難しいですよね💦大きな失敗をせずに済んでほっとしています😌笑