i've sat the past couple of days for HOURS scouring the internet for different tutorials. everyone told me to stay far away from youtube or i'd mess up. had errors every single time until i gave up and found this video. 30 minutes later and i've done it lol. amazing. thank you!
honestly staying away from yt is horrible advice, u just gotta be careful to pick someone who knows what theyre doing, the like to dislike ratio is usually a good way to tell.
Update: If you install the TV Version of Android you must install the tvmini version of openga not pico. Pico should be used for tablet version of android only.
Just a small note* that joycon extras changes the default layout of your joycon to match the xbox controller in the sense that A/B are swapped. Definately a matter of preference ;).
I followed the video with 0 issues until 17:14. When i rebooted to bootloader and click more configs>android 10 it put me back onto the Team Win Recover Project screen rather than into the normal android software. Any suggestions? Edit: I did a lot of troubleshooting and looking at other tutorials, and it turns out the only problem was that when you use tablet version, you have to install pico, but with tv version, you install tvmini. I was trying to use the tablet version with pico, which did not work. Hopefully this helps anyone with the same stupidity as me :)
Everything went well through out the tutorial! All links worked, steps could be better but it's good enough, and the end result of my switch is definitely an android! I'm using a 32GB SD card and the menu seems pretty smooth and normal. I haven't tested any apps but for the base android, works perfectly! Thanks for making this tutorial!
@@VickTamayo As in performance, it's definitely a low end. Some games lag pretty hard. My Android switch is basically plays Roblox and Minecraft mostly for my siblings. So according to my siblings it lags hard but playable. I'm sure there's more potential if I had a bigger SD card (my current is still 32GB) and in-game optimization. Hopefully this helps at least a little
after all that i wasnt looking when you turned on developer settings... i was trying to figure it out for 10 minutes til i found info online. subbed because your tutorials are fantastic even with the hiccups lol
Thank you so much, sir. Several tutorials I followed had a bunch of extra stuff that overcomplicated stuff and was causing it to fail. Thanks for making this as I've been hung up for hours.
Finally someone who knows how to show someone a proper way to do a tutorial on this! Actually shows the screen not to far and blurry like others and tells people what to expect on wait times and used your actual voice not some damn male siri robotic voice! Glad I found your video and f that one dummy who gave you a thumbs down! You got a subscriber for this would like to see what you do on yours me im looking forward to emulators and gonna install watched app with my paid subscription so I can have tv wherever I’m at in the house. Just won’t let my daughter install roblox or I’ll never see my switch again. Thanks again!!!! 👍🏾👍🏾👍🏾👍🏾👍🏾
I came here again just to say thank you so much for ur tutorial it's the best tutorial and the easiest one for me. Now I can even run dual boot on my V1 Nintendo switch awesome! Thanks ❤️
No wonder why my 256gb went to 2gb it was at the step at time 9:40. will this still work if i only had the orange bar at around 20% and green at 80? I would have no space foe anything else otherwise
amazing guide. I managed to get to the point of installing Gapps, then lineage kept going into twrp on every attempt to boot into it. It gives the loading screen then it goes black and goes into twrp instead of the welcome screen.
@@joelmoses8 yes i did, sorry to the late response. turns out I was accidentally trying to use the incorrect gapps. make sure the gapps you are using is for the correct version whether you chose the handheld mode or the tv shield UI.
hello, great video, but do you need an RCM loader to install android
3 роки тому+2
hello lads! trying this one for my daugther´s swtich.. quick question, before doing all of this, after installing, can i just eject the sd card and boot into the normal swtich os? or do i need to do something else to be able to do that. i want to install android so she can play roblox, but i would like to be able to play some mario once in a while.
You can just power off the nintendo switch and remove the sdcard (or you could leave it if you want), and when you turn the switch back on, it will boot like a normal switch!
Did you install android first and boot into android all the way then restart and install gaapps? If you did you may need to start over by wiping sd card.
@@LOETECH Yes i did it the same way you did it in your video. Found the issue I was installing Android TV and you need to use OpenGA TV Mini not Pico for the Android TV build. Thanks for the quick reply though.
I was facing a black screen issue when trying to flash TWRP and this video walked me through everything and I was able to boot into Lineage! Thank you!!
@@Joe95Down I went to sleep and retried it now. Left it on for over an hour and it worked :D just took much much longer than it did for the person in the video. Best to just leave it on and let it do it's thing over an hour
Thank you for the very instructional video; I just installed android on my switch. Quick question, Netflix is not showing up on the Play Store. Did you side loaded it?
Hello. Every time I try to boot into Android 10 after flashing it on my switch it never boots. It just shows a black screen. I have seen some people with the same issue and have tried their fixes but it has not worked for me at all. I've tried to reformat my sd card and install all the needed contents inside it for over 15 times now, trying to do things different each time to see what is causing this issue and I cant seem to find any sort of solution. Please someone if you can help that would be amazing.
how do i install geforce now. nvidia games wont let me sign in. and nvidia games is an app that the system cant run without.(tried to remove it with root)
Wonderful, reduced to the essentials...!!! Thank you for this guide, it worked perfect for me! I also use an RCM Loader. Left an abo + bell. *Thumbs up*
thanks for the video..if u have problem with missing nyx/missing lp 0,just format your sd card again to exfat/fat32,and copy again the files to your sd card..need ecxtract the rar to your your computer first,dont extract it to your sd card,then copy it to your sd card
I have some problems when I install gaps for tv version. I downloaded tvmini gapps but after twrp,the system boot error.(can’t get in the system,after once booting motion then auto boot to twrp). If I don’t install gapps only system zip the boot were successfully. I really don’t know witch step was wrong.
So when i did partition sd card i lost all of my previous files that i had on my sd card and cant find a way to get them back i would need some help im not the best with these things a little help would be appreciated
OMG! Thank you so much! You're the only person who helped me figure this out! You are amazing! Now I can play gamecube and wii games! Off to Animal Crossing! XD
Also, I did the same exact steps you did, and my switch is able to run docked on my tv. The only thing I would recommend is dumping the joy cons so you can use them in docked mode. 😊
@@Eeeve23 hello, my english are not perfect but i think understand in the vidéo have one version for " portable gaming" and one other for " docked" version but you tell you don't have problem with the portable version on the dock that it?^^
hey can you help? I got an issue sometimes this Android is freeze and nothing I can do except press power button to turn off my switch. I already do it like on this videos. but sometimes the android is crashing, any solution?
Thanks for the great tutorial as always. Quick question. I did the tablet mode like you did in the video. How do I use my dock? Or do I have to redo everything with the tv mode instead?
After all is done, is there any settings that can cause damage to OS? I mean is it safe to get updates from settings. Tutorial did not cover the notification disable, is it possible to disable them afterwards. I don't like switch waking up from sleep. Also last question: Can you do factory reset from android settings? Great tutorial!
Hi, I ve installed correctly android. I ve played all day with stadia, I ve turned off my switch. Now I ve turned it on and start in (Nintendo normal mode) why? What can I do for start in Android mode?
I installed Android succesfully but on the second attempt. After the first failed attempt I did put all the data back on the sd card which I backed up on the pc before because everything was deleted after the sd partition manager set up for Andorid. But now I can´t enter my EMUMMC where all my homebrew apps, games etc. are on there. When I´m trying to enter EMUMMC via fusee payload I get always this error message: " A fatal error occured when running Fusee. Invalid GPT signature. Press Power to reboot ". And I´m stuck there when I press the power button unless I hold the power button for around 5 seconds for a shutdown. When I´m trying to enter the EMUMMC under the Launch section on Hekate, I always get this error message: " Unknown pkg1 version. HOS version not supported ! Or emummc corrupt ! Trying backup bootloader....Found pkg1 ( " ). Unknown pkg1 version. HOS version not supported ! Or emummc corrupt ! Failed to launch HOS ! Press any key...". This error message is shown while the usual Hekate-IPL Logo is displayed on the center of the screen. I can enter the Sysnand, Stock and Android but not EMUMMC. You guys know a fix for that ?
i need help i got all the files on to my sd card. added the Bin file onto a flash drive that i connect to the switch. but i think its still in recovery mode. how do i install the hetake onto the switch so i can load up the switch into hetake app???
Hello great video I think this is easy one to follow. But most of the videos I watched they all always dump the joycons for the installation in order to make the joycons for for Android. But in this video you didn't you that, is it because this video tutorial is already outdated or what? Please help me to understand I really want to instead android.
Everything works fine, but I get a message saying "there will be dragons". Anyway to fix that? I had to reinstall everything on my switch and never had that happen before? Or should I just ignore it?
after installing opengapps and joy con xbox it takes like 2 minutes in the lineage os loading screen then i get sent back to twrp i tried booting multiple times no luck edit: i even tried redoing the entire process it just dosnt boot after installing opengapps and joycon xbox
if we formatted the flash drive in Fat 32, then how to throw off games with a large volume, the new firmware 11 does not allow you to throw off via usb?
I'm trying to find a way to dual-boot Android and atmosphere. I'm have the must recent version of hekate and know I can have multiple emuNANDs to boot from. I just can't quite figure out how to dial boot, can you release a video that shows us how it's done?
That's looking great! So it doesn't affect the Switch itself, right? If I use a clean SD card for Android, can I always just change to my Atmosphere card with everything on it again and it's going to work?
Thanks for the awesome help! ive been trying to use my nintendo pro controller but for some reason the control sticks don't respond. everything else dose work but the left and right don't respond. is there a fix for this? sorry about that.
Got this working. The problem I'm having is when I dock the Switch to my TV, Android forces the resolution to 4K, which severely affects performance. Anyone found a way to force 720p when docked?
n00b question. Any chance of a console ban here? I assume no as it looks like everything runs from the SD card. Also I assume you just switch off take out the SD card to get back to the normal switch os
Correct, it should be completely safe, and to go back to normal, you can just power off the nintendo switch and remove the sdcard (or you could leave it if you want), and when you turn the switch back on, it will boot like a normal switch!
When I try to load android for the second time, it brings me back to teamwin and then when I choose reboot to bootloader I end in hekate. I keeps cycling with no success.
To make it simplier, at the 17:05 you are loading for the second time. That's when mine fails and goes back to teamwin. It doesn't let me enter android
@@LOETECH I did the same thing you did on the video, install android first and then enter LineageOS, after that I Installed gapps and when I tried to enter LineageOS again it didn't let me.
I use atmosphere to play games. I'm on 10.2.0. will this work on that firmware? Also if my sdcard dies after I setup lineage and android can I just get a new sd card and set up lineage and android the same way
I partitioned micro sd card to use android but when I put sd card to pc, there is no partition. there is only 2gb partition. Where is 22gb partition? And where is my android games installed?
@@LOETECH I found 22gb partition and I installed 2gb game on 22gb partition, but the partition show the capacity is 22gb. not 21gb. Where did I installed game?
I'm having an issue with this process. Everything goes fine for me up until the android install, where I'm told to enter a password. No matter what I enter, it says the password was correct, but that files were corrupted and I had to erase all my save data on the sd card. Anyone know a solution for this?
Followed steps and succeed, only one glitch, when I heat the power button on android 10 trying to calling out the power menu on right side, it didn't show up.
i've sat the past couple of days for HOURS scouring the internet for different tutorials. everyone told me to stay far away from youtube or i'd mess up. had errors every single time until i gave up and found this video. 30 minutes later and i've done it lol. amazing. thank you!
honestly staying away from yt is horrible advice, u just gotta be careful to pick someone who knows what theyre doing, the like to dislike ratio is usually a good way to tell.
@@curtiss9116 the dislike button is hidden now so
still a year later a few switches later this is still by far the best step by step guide i've found. Thank you for this video.
Update: If you install the TV Version of Android you must install the tvmini version of openga not pico. Pico should be used for tablet version of android only.
Just a small note*
that joycon extras changes the default layout of your joycon to match the xbox controller in the sense that A/B are swapped. Definately a matter of preference ;).
Awesome thanks for sharing
@@LOETECH please flasher image not fond😫
@@LOETECH I copy them more than once but I can't find them why?
Thanks! This method is ALOT easier than the previous Switchroot. And I can use my 400GB card!
@Cillem! You should be able to boot into the Switch OS with Hekate. Haven’t touched my Switch in about six months, lol.
I followed the video with 0 issues until 17:14. When i rebooted to bootloader and click more configs>android 10 it put me back onto the Team Win Recover Project screen rather than into the normal android software. Any suggestions?
Edit: I did a lot of troubleshooting and looking at other tutorials, and it turns out the only problem was that when you use tablet version, you have to install pico, but with tv version, you install tvmini. I was trying to use the tablet version with pico, which did not work. Hopefully this helps anyone with the same stupidity as me :)
Everything went well through out the tutorial! All links worked, steps could be better but it's good enough, and the end result of my switch is definitely an android! I'm using a 32GB SD card and the menu seems pretty smooth and normal. I haven't tested any apps but for the base android, works perfectly! Thanks for making this tutorial!
Any updates?
@@VickTamayo As in performance, it's definitely a low end. Some games lag pretty hard. My Android switch is basically plays Roblox and Minecraft mostly for my siblings. So according to my siblings it lags hard but playable. I'm sure there's more potential if I had a bigger SD card (my current is still 32GB) and in-game optimization. Hopefully this helps at least a little
@@VickTamayo Also some things like Netflix isn't accessible through this, idk why
@@neomorphic6639 I sideloaded netflix,Disney plus and other apps that weren't available from the playstore and they work well.
You know what?! THANK YOU SO MUCH! I've done it and your video is the easiest one to follow on UA-cam. Thank you so much ❤️
after all that i wasnt looking when you turned on developer settings... i was trying to figure it out for 10 minutes til i found info online. subbed because your tutorials are fantastic even with the hiccups lol
Thank you so much, sir. Several tutorials I followed had a bunch of extra stuff that overcomplicated stuff and was causing it to fail. Thanks for making this as I've been hung up for hours.
Finally someone who knows how to show someone a proper way to do a tutorial on this! Actually shows the screen not to far and blurry like others and tells people what to expect on wait times and used your actual voice not some damn male siri robotic voice! Glad I found your video and f that one dummy who gave you a thumbs down! You got a subscriber for this would like to see what you do on yours me im looking forward to emulators and gonna install watched app with my paid subscription so I can have tv wherever I’m at in the house. Just won’t let my daughter install roblox or I’ll never see my switch again. Thanks again!!!! 👍🏾👍🏾👍🏾👍🏾👍🏾
Check out my Android 10 on Switch playlist. Thanks for watching
LOE TECH ok I will check it out now
And thanks for subscribing! Appreciated!
installed successfully without problems, thanks for this video
Your welcome! Thanks for watching!
I just hit the sub button man, thanks so much for this complete guide! I was able to follow it without problems. Thanks!
You are very welcome and thank you!!!!!!
@@LOETECH brother is it a risk if i do this on my switch ?
I just want to use it to play gamecube n64 emulators on the switch by using the switch
Ayo bro I need your help, how can I uninstall the Xbox plugin for the Joy-Cons? I don't like it, I'm not feelin good with them :/
Honestly same
I came here again just to say thank you so much for ur tutorial it's the best tutorial and the easiest one for me. Now I can even run dual boot on my V1 Nintendo switch awesome! Thanks ❤️
No wonder why my 256gb went to 2gb it was at the step at time 9:40. will this still work if i only had the orange bar at around 20% and green at 80? I would have no space foe anything else otherwise
amazing guide. I managed to get to the point of installing Gapps, then lineage kept going into twrp on every attempt to boot into it. It gives the loading screen then it goes black and goes into twrp instead of the welcome screen.
Same issue, did u manage to resolve it.
@@joelmoses8 yes i did, sorry to the late response. turns out I was accidentally trying to use the incorrect gapps. make sure the gapps you are using is for the correct version whether you chose the handheld mode or the tv shield UI.
@@AlexThePhenex thanku 🙏!
@@joelmoses8 You are very welcome. Hope that resolved your issue.
@@AlexThePhenex ill find out shortly heheh thanks again :D
any idea how to uninstall joycon-xbox?? It swaps A and B and on a Nintendo device that feels WRONG! lol B is confirm and A is cancel.. that sucks
hello, great video, but do you need an RCM loader to install android
hello lads! trying this one for my daugther´s swtich..
quick question, before doing all of this, after installing, can i just eject the sd card and boot into the normal swtich os?
or do i need to do something else to be able to do that.
i want to install android so she can play roblox, but i would like to be able to play some mario once in a while.
You can just power off the nintendo switch and remove the sdcard (or you could leave it if you want), and when you turn the switch back on, it will boot like a normal switch!
After installing Openga I can't boot back into android, it gets to the screen at 17:06 then reboots back to Team win? Any ideas what's gone wrong?
Did you install android first and boot into android all the way then restart and install gaapps? If you did you may need to start over by wiping sd card.
@@LOETECH Yes i did it the same way you did it in your video. Found the issue I was installing Android TV and you need to use OpenGA TV Mini not Pico for the Android TV build. Thanks for the quick reply though.
Nice to know, thanks for sharing, glad it worked out, and...thanks for watching 👍
I was facing a black screen issue when trying to flash TWRP and this video walked me through everything and I was able to boot into Lineage! Thank you!!
For me it gets stuck at "restoring lineage-17.1-20210510-UNOFFICIAL-foster_tab-signed" and have been waiting for ages and is still the same.
Same thing just happened to me. Figured out a solution yet? I can't find anything on the XDA forums yet.
@@Joe95Down I went to sleep and retried it now. Left it on for over an hour and it worked :D just took much much longer than it did for the person in the video. Best to just leave it on and let it do it's thing over an hour
Thank you for the very instructional video; I just installed android on my switch. Quick question, Netflix is not showing up on the Play Store. Did you side loaded it?
Your welcome.......I have not installed it but that would be the way I would try😉
Thank you very much. It works. Now I Gonna try to emulate old arcade games. Greetings from Mexico.
Your welcome!
uhh when i do the android flasher thingy it says warning-mkernal, twrp and dtb image not found
hi. thx for the tutorial. Is Hos32 a hidden partition right? but is atmosphere installing the games on HOS32 ? or emunand partition?
Hello. Every time I try to boot into Android 10 after flashing it on my switch it never boots. It just shows a black screen. I have seen some people with the same issue and have tried their fixes but it has not worked for me at all. I've tried to reformat my sd card and install all the needed contents inside it for over 15 times now, trying to do things different each time to see what is causing this issue and I cant seem to find any sort of solution. Please someone if you can help that would be amazing.
That’s interesting, I had that issue as well but reflashing the sd card worked fine. Are you sure you formatted it to fat32?
@@LukePlays17 Oh yes it was. But I figured out the problem. It was the sd card. Used another one and it's fine now.
I know rhis os old but what should I do when i get a black screen when reloading to helate? It wonr let me
I let the battery runs out while using Android and the videogame don't turn on anymore, let him a whole night in the charger. You know whats happened?
how to rollback a bad install without reformatting and partitioning everything again?
Bonjour, je ne comprends pas trop l'anglais mais c'est bien expiliqué et j'ai réussi à mettre android sur ma switch. Merci beaucoup
I can't, because when I have an SD card inserted in my nintendo switch console, it does not show the panel, please help
What panel?
Hey how do I flash a different version say the tablet version I think I did the other and don't like it. I don't wanna buy another sd
how do i install geforce now. nvidia games wont let me sign in. and nvidia games is an app that the system cant run without.(tried to remove it with root)
Wonderful, reduced to the essentials...!!!
Thank you for this guide, it worked perfect for me!
I also use an RCM Loader.
Left an abo + bell. *Thumbs up*
sorry for asking but do you need an rcm loader to do this
Hello, is there a way to connect a microphone? I tried to connect it to the jack input and with bluetooth, but it does not work
i get a black screen after flashing zips/reboot, it says hekate and then goes blue and black screen, and doesnt load lineage. how do i fix this?
How do you get to your hekate on Nintendo switch? I don't really get it like because you suddenly in hekate when you shooting your Nintendo
thanks for the video..if u have problem with missing nyx/missing lp 0,just format your sd card again to exfat/fat32,and copy again the files to your sd card..need ecxtract the rar to your your computer first,dont extract it to your sd card,then copy it to your sd card
hi i have a problem so my wifi isn't working it stucks at the ip adress and also joycons are not working
when I'm in twrp recovery the touchscreen doesn't work at all , it works on hekate and the switch OS , any advice ?
same
same
When I try to boot into Hekate it takes me to a weird page and I’m using the TV version
what if I already have cfw installed on my switch? can I use the same sd card (250gb) and what steps should I skip/follow?
i have a question can you go back to the main menu of the swtch and stiil play your nintendo games?
I have some problems when I install gaps for tv version. I downloaded tvmini gapps but after twrp,the system boot error.(can’t get in the system,after once booting motion then auto boot to twrp).
If I don’t install gapps only system zip the boot were successfully.
I really don’t know witch step was wrong.
So when i did partition sd card i lost all of my previous files that i had on my sd card and cant find a way to get them back i would need some help im not the best with these things a little help would be appreciated
hi man , great video , the touch screen in twrp dont work for me , there is any solution ?
OMG! Thank you so much! You're the only person who helped me figure this out! You are amazing! Now I can play gamecube and wii games! Off to Animal Crossing! XD
Also, I did the same exact steps you did, and my switch is able to run docked on my tv. The only thing I would recommend is dumping the joy cons so you can use them in docked mode. 😊
@@Eeeve23 hello, my english are not perfect but i think understand in the vidéo have one version for " portable gaming" and one other for " docked" version but you tell you don't have problem with the portable version on the dock that it?^^
why my nintendo switch show that dtb twrp and and kernel not found
When I click nxsettings. And I buy a new set of joycons, do I need to do the nxsettings again or will it just be once and will work with any joycons?
hey can you help? I got an issue sometimes this Android is freeze and nothing I can do except press power button to turn off my switch. I already do it like on this videos. but sometimes the android is crashing, any solution?
Thanks for the great tutorial as always.
Quick question.
I did the tablet mode like you did in the video.
How do I use my dock? Or do I have to redo everything with the tv mode instead?
I think if you just put it in the dock it works, or I could be wrong.
Hi, I installed lineage 17 and open gapps 10, after turning on android it keeps restarting. What's the problem?
at 10:25 it cant find the kernel image and the other two what should i do??
did you format in fat32 and put android zip on sd after formatting?
forgot to install android thx. but did you say that in the vid??
Fat32? yes, install android? Yes 👍
My joycons are not working in the games how do I fix it
Thanks man, everything worked fine.
Glad to here. Thanks for watching
After all is done, is there any settings that can cause damage to OS? I mean is it safe to get updates from settings. Tutorial did not cover the notification disable, is it possible to disable them afterwards. I don't like switch waking up from sleep. Also last question: Can you do factory reset from android settings? Great tutorial!
after loading back to andriod but when i power it on it loads the andriod thing but goes to sleep
\
Thanks for the tutorial! Time to mod a new switch if I get one
Hi, I ve installed correctly android. I ve played all day with stadia, I ve turned off my switch. Now I ve turned it on and start in (Nintendo normal mode) why? What can I do for start in Android mode?
Nice tutorial dude. Greetings from Mexico!
Thanks for watching, glad you liked it
Avocado from Mexico
I installed Android succesfully but on the second attempt. After the first failed attempt I did put all the data back on the sd card which I backed up on the pc before because everything was deleted after the sd partition manager set up for Andorid. But now I can´t enter my EMUMMC where all my homebrew apps, games etc. are on there. When I´m trying to enter EMUMMC via fusee payload I get always this error message: " A fatal error occured when running Fusee. Invalid GPT signature. Press Power to reboot ". And I´m stuck there when I press the power button unless I hold the power button for around 5 seconds for a shutdown. When I´m trying to enter the EMUMMC under the Launch section on Hekate, I always get this error message: " Unknown pkg1 version. HOS version not supported ! Or emummc corrupt ! Trying backup bootloader....Found pkg1 ( " ). Unknown pkg1 version. HOS version not supported ! Or emummc corrupt ! Failed to launch HOS ! Press any key...". This error message is shown while the usual Hekate-IPL Logo is displayed on the center of the screen. I can enter the Sysnand, Stock and Android but not EMUMMC. You guys know a fix for that ?
This video is awesome, Thank you!
Okay so now how to I switch back to my switch menu?
what happens if the switch is already modded and has all of the modded files in the SD card does this still work?
i need help
i got all the files on to my sd card. added the Bin file onto a flash drive that i connect to the switch. but i think its still in recovery mode. how do i install the hetake onto the switch so i can load up the switch into hetake app???
You need to either use a proper bootloader or connect the switch to your computer and use the TegraRcmGUI
Hello great video I think this is easy one to follow. But most of the videos I watched they all always dump the joycons for the installation in order to make the joycons for for Android. But in this video you didn't you that, is it because this video tutorial is already outdated or what? Please help me to understand I really want to instead android.
Everything works fine, but I get a message saying "there will be dragons". Anyway to fix that? I had to reinstall everything on my switch and never had that happen before? Or should I just ignore it?
after installing opengapps and joy con xbox it takes like 2 minutes in the lineage os loading screen then i get sent back to twrp i tried booting multiple times no luck
edit: i even tried redoing the entire process it just dosnt boot after installing opengapps and joycon xbox
Finally!!! Thanks!!!! :)
for some reason my play store isn't there I need help
it says nyx is missing when i try to boot hetake... pls help
everything works except when I try to download the play store it gives me error 70 I have tried everything to fix it but nothing has worked
i have a solution to my own problem you see you want to get arm64 andriod 10 PICO not nano PICO
How about the same install tv dock mode and tablet mode it will work at the same time?
if we formatted the flash drive in Fat 32, then how to throw off games with a large volume, the new firmware 11 does not allow you to throw off via usb?
I dont know what will happen on 11 but 10 does. I use a usb a to c adapter and transfer that way.
@@LOETECH good, i am understand
I'm trying to find a way to dual-boot Android and atmosphere. I'm have the must recent version of hekate and know I can have multiple emuNANDs to boot from. I just can't quite figure out how to dial boot, can you release a video that shows us how it's done?
just watch a vid or dual boot its really easy
That's looking great! So it doesn't affect the Switch itself, right? If I use a clean SD card for Android, can I always just change to my Atmosphere card with everything on it again and it's going to work?
Yes, that is what I do myself. You can quad boot the same card, but I opt to keep it separate
@@LOETECH someone told me quad boot with linux is unstable and can mess up sd. Is that true?
Nice vid
Just wanted to ask is this going to work with a 32 GB micro SD
Yes
Thanks a lot
Your Welcome! Thanks for watching!!
can you go back and forth from this and switch os ?
Thanks for this! But somehow my wifi keeps dropping, does yours do that too?
it happens to me sometimes, try reconnecting or waiting.
thanks everything is working as plan, but I was wondering how can I go into between modes ? like going in nintendo mode and Android mode??
Just pull out sd card and turn on to go back to stock.
use the developer menu to turn on advanced reboot and go to bootloader this will take you back to hekate
Hello thanks for the vidéo have actually a better version of lineage Android available for Switch ?
Thanks for the awesome help! ive been trying to use my nintendo pro controller but for some reason the control sticks don't respond. everything else dose work but the left and right don't respond. is there a fix for this? sorry about that.
Got this working. The problem I'm having is when I dock the Switch to my TV, Android forces the resolution to 4K, which severely affects performance. Anyone found a way to force 720p when docked?
It gave me an error when installing the playstore thing. Anyone know why?
n00b question. Any chance of a console ban here? I assume no as it looks like everything runs from the SD card. Also I assume you just switch off take out the SD card to get back to the normal switch os
Correct, it should be completely safe, and to go back to normal, you can just power off the nintendo switch and remove the sdcard (or you could leave it if you want), and when you turn the switch back on, it will boot like a normal switch!
appreciate all the help. Do you know if this version works with playstation remote play like the last version?
No problem......it SHOULD. I have not personally tested it. I have tested steam, moonlight, and xbox streaming with success.
Im experiencing restarts when i open many video tabs on the web browser, anyone knows how can i fix it on 17.1?
Hello ถ้าติดตั้ง Androidบน switch จะมีปัญหาอะไรกับเครื่องมั้ยครับ
When I try to load android for the second time, it brings me back to teamwin and then when I choose reboot to bootloader I end in hekate. I keeps cycling with no success.
To make it simplier, at the 17:05 you are loading for the second time. That's when mine fails and goes back to teamwin. It doesn't let me enter android
Did you install android or you install Android and play store at the same time?
@@LOETECH I did the same thing you did on the video, install android first and then enter LineageOS, after that I Installed gapps and when I tried to enter LineageOS again it didn't let me.
Did you install TV version or tablet?
@@LOETECH TV version
This helped me, thank you!
Glad it helped!
can it go back to the nintendo menu?
how do you switch back to normal?
I use atmosphere to play games. I'm on 10.2.0. will this work on that firmware? Also if my sdcard dies after I setup lineage and android can I just get a new sd card and set up lineage and android the same way
I partitioned micro sd card to use android but when I put sd card to pc, there is no partition. there is only 2gb partition. Where is 22gb partition? And where is my android games installed?
windows wont see android partition.
@@LOETECH I found 22gb partition and I installed 2gb game on 22gb partition, but the partition show the capacity is 22gb. not 21gb. Where did I installed game?
And do you need the rcm loader or just the RCM jig
You need the jig at least and a usb c cable to send payload from pc. Loader just allows you to send a payload without a pc.
I'm having an issue with this process. Everything goes fine for me up until the android install, where I'm told to enter a password. No matter what I enter, it says the password was correct, but that files were corrupted and I had to erase all my save data on the sd card. Anyone know a solution for this?
If your switch dies or you power off do you have to inject payload again or does it automatically load you back in to lineage when you power back on?
You have to inject the payload again either from a computer or from an rcmloader
Followed steps and succeed, only one glitch, when I heat the power button on android 10 trying to calling out the power menu on right side, it didn't show up.
One other person has reported this issue. You may have to reinstall Android.