CDHPower 80CC Motorized Bicycle - My 2019 Ultimate Build - Part 2!
Вставка
- Опубліковано 6 жов 2024
- Please subscribe for more! This build was completed in 3 days total to ensure proper assembly. Unfortunately in this video the bike shown was on the "break-in period" as a result I couldn't go faster than 30MPH. Also with this premium engine kit you get a better built motor, OKO carb, window piston, Dio Reed Valve, Super Banana pipe, and a 36T sprocket. The frame comes with the 36t sprocket as well.
Bike frame: amzn.to/2SJleCj
Zeda Dio 80 motor kit: amzn.to/2M6wI0t
Bike seat: amzn.to/2SSnGqt
Racing handles: coming soon...
Dual brake handle: amzn.to/2M6eEUb
3 Sprong Spark Plug: amzn.to/2Fqgv5O
Front and back light: amzn.to/2D9RRnt
Stainless steel gas cap: amzn.to/2STgJoO
CNC head: amzn.to/2SUUBuy
Thumb Throttle: amzn.to/2D8tqXI
The action camera (Thieye): amzn.to/2VBCIT9
#Motorizedbike #ZedaDio80 #CDHPower
![Phantom 85 [V3] - No Motorized Bike Engine Will Go Faster At This Price!](http://i.ytimg.com/vi/Kub_YUsa6rI/mqdefault.jpg)
People search for the most satisfying videos. When a dream build is completed, after a few intermediate builds, that is satisfying.
its a very rewarding feeling
You can't just keep going smaller on the rear sprocket and expect it to be faster. Your increasing resistance the motor has to overcome to push it. To much resistance and it won't have enough torque to accelerate it past the top speed it had before possibly less. Also it will pull the rpms down resulting in very slow acceleration, struggling to get going and excessive lugging which is a 2 stroke engine killer. Going excessively big on the rear sprocket will give eyeball sucking acceleration, reduced top speed and engine over revving if you run at full throttle. Gear it to putting the power band where you use it and it will be a lot more fun to ride.
4stroke hell yea! I've got a 212cc on a beach cruiser .
This should get you back and forth to school
As always great looking fast bike and useful information
this bike is pretty cool :)
Hi MJTech your cash and great ideas make some awesome bikes and your videos are an inspiration to us all. My brother used your bike rack idea as a sissy bar on his tank frame bike, thanks. Can you tell me what jets you are running in that oko, sounds sweet.
Is it a Bicycle or a Moped ?? Noticed again, like in last video, your not wearing any protection...Hurts just as much coming off at motorbike, as it does on a bicycle/moped
I want to call it "mopecycle"! Law says that it is considered a motor assisted bicycle! Legal under 50cc and not faster than 20mph.
@@MJTechChannel did florida change its laws? i get hassled alot. if i didnt have legal drivers license, i am sure i would have went to jail a few times.
I have just discovered some very interesting 4-stroke engines. One is Zongshen NH130 (90 usd in a local store) and is 130cc and 10 Kg heavy. Another one is AEROBS 154F at 87cc and 9 Kg. Another one is LIFAN 152F at 79cc or 93cc or 97cc or 105cc (8-9 Kg heavy and 100$-150$). After you remove the speed governor, change the carb + the exhaust and polish the ports those 2.5-3 HP will become much more than that. I will post some videos soon.
These engines can be found in your local stores cheaply in water pumps ! So instead of searching them on Amazon or Ebay you better search locally for 2.5 HP or 3 HP water pumps and recognize the engine from the photos and specs. Or search for "154f engine" or "152f engine" without the brand name because many companies make them, they are Honda clones.
Sounds awesome ..deep
And the dual brake lever...is a must ti have...
Nice bike. I'll be working on a project bike this summer
i got the stock out the box no mods or upgrades 1 come in at 220 60+ on flat ground 40 to 50 uphill no pedal just got the 26 tooth sprocket racing carb and a set of street tire oh its gonna be hella fast .
It's going to be hella doggy with that little sprocket. Wasted clutches and broken motor from lugging it all the time. Probably slower unless your going down hill.
Stock kit with very little port work a RSE reed custom window piston MZ65 will pull a 26.
Hey how doing I have the same bike I would like to know where could I get a banana seat like yours the link you provided say it sold out i want something to just put it on there without modifying anything?
Amazon sells them.
Put hydraulic brakes on it you'll thank me later.
dear video maker
you know if you get a 28 tooth sprocket you will not have even close to enouph torque to take off even with that dio reed vale and carb also you will only get about half the calculated speed increase trust me I know from experience I got a 36t sprocket and calculated 5-6 mph speed increase I got 3 mph speed increase then I got a 30t sprocket I calculated 12mph speed increase and got about 6-7mph speed increase and when I put the 30 tooth sprocket on it I had to pedal my ass off in order to get the engine started or even to take off after it was already started now I didn’t have a dio reed valve but I did have a regular read valve and a performance carb if I were you I would just invest in a shifter kit it is a little expencive and it is harder to put together then a normal sprocket but it is worth it because when at the lowest gear you can go 50 mph and at the highest gear you will have enough torque to do some big wheelies here is a link to where you can buy a shifter kit off of eBay and if you don’t want to buy it off of eBay just search for “shifter kit” or “shift kit” where ever you buy your parts from
Shifter kits on eBay
www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=motorized+bike+shifter+kit&_sacat=0&LH_TitleDesc=0&_osacat=0&_odkw=motorized+bike+shifter&LH_TitleDesc=0
What size jets are u using?
You want a Jackshaft kit? Do not buy Ebay junk buy Sick Bike parts Jackshaft. Been there done that you can get way way more use and speed out of the one gear then you can in the Jackshaft setup. Port work does wonders for a motor. I pull a 28 on one of my bikes and a 26 tooth on the other.
nice build!
Try competing in the Tour De France with that bike lol.
Seriously though, would it be nice if you come up with a Discord server?
As lance Armstrong would say, that's DOPE
Do you like those handle bars? I honestly didn't like them they are too narrow and can't steer as good and too low it kills your back if your riding for anything over 10min. BUT they do look the best.
Nice mobicycle
Gonna suck when you brake the carb off
Run LED signal and rear flasher rechargeable is no interference from the motor
What do you think of the fork that comes with the frame?
Did you just buy this bike as well and notice it has a different fork
Spring chain tensioner, stuff the case, is it ported? Advance the timing a tiny bit?
Nice bike dude
Ok, I'm kinda confused. The header said CDH power motor, but in your parts list it says Zeda 80.
I been doing research and I've come to the conclusion that the CDH is a Zeda clone.
Only left to convince me is the bottom end on the CDH, does it have the thick hubs like the Zeda? Nice bike btw and thanks☺️
They're all the same with different stickers
Wheres your dio from zeda motor sports? Almost as cool as my bike.
I am building 2 more bikes as we speak. I will make a 2 stroke and a 4 stroke.
Hey where do I get ahold of a fuel valve for my inframe tank bike
You can order them on amazon, sometimes get lucky at automotive shops
Please can you refer me to the right source does this last longer than electric please let me know please.....
What clip on bars did you use?
what kind of motor on that bike it really gets some speed
Zeda mafia all he did was buy the parts together everything comes ready to install
seems like every motorized bike build these days looks either like a junkyard huffy mountain bike, or the gas tank frame/ banana seat and split handlebars, dont forget the cyclone mag rims e_e. god... is anybody ever gonna be original
Josh not sure if this is original, but my motorized bike is a hyper beach cruiser with a Honda gx35 friction drive system, a thumb throttle, a Honda crf150f kill switch, and it also has Boardtrack racer style handlebars.
thats cool, i have an ebike, but how much gas to go 10 miles? or 10km? does it have pedal assist?
They can go like 100 miles per gallon
How much are u into it on that bike i like it .
How about the top speed?
Bro put towel over mic for wind
top speed? I love your build
50mph with the current 36t sprocket.
@@MJTechChannel nice
do you need an extra spacer in between the sprocket frame? im starting this build bike and im just looking at what you have
You can, so that you dont stress the frame.
@@MJTechChannel it does makes sense. where did you find that spacer?
Beautiful machine! Can you ride it on public roads?
Does anybody know how to install a bottom bracket on these things?
Yes
Do you need a motorcycle license in FL after 50cc?
Yes
Yes you do.
You should get a real pipe from Zeda and a ngkb6hs spark plug it’ll run better and be faster with that pipe I think Zeda will be in stock with mz65 pipe in about a month
Nice bike.. I have same frame and about to buy some mag wheels. What are the spacers for? The mags I'm looking at have a built in sprocket . do they not align with the motor sprocket and need to be modified
Locktite the sprocket when you get it, blue locktite Is your friend. Also don't forget the triple tree suspension 😎
Do you burn your leg on that exhaust?
Doesn't look like you got a response. I have the same setup, and it gets warm but not really hot enough to burn you (unless you press against it)
What size jets you use in that carburetor.
I am to get mine to work but it keep bogging down when i give it throttle.
Ever fix it ??? What size jet u use
Does anybody know what forks and handlbars hes useing i want to get a set for my bike.
Mayi how do i get this please reply ASAP please or how do i build it....
Amazon sells this whole kit or individual parts. Cdhpower
Link for carb and setup
Flying Horse
Do you get smoke oil on your pants beacuse of pipe?
Same setup, I've had no oil issues and have not burned myself either
What was the tag price for the whole bike build?
One thing I will say that is the best toughest frame I've ever owned q I got hit by a vehicle pretty hard in the frame has a few scratches no Benz cracks nothing and never CDH PowerForce that they say or so cheap that are bent damn hands down to me best frame and best tree forks that I've owned
Where did you get the banana seat from?
Chase Wheeler troxel in Tenn.
NOS sticker. lol.
To noisy for me
im sure this guy after he review he will sale it on ebay..hahaha
"Sale it"??? I think you meant "sell it".
Ummmm someone should've paid attention in school... it's not "sale it"🤣🤣 its sail it dumie🤪
Sale! Learn how to spay-ell! It’s sell! SELL!!!
where did you buy that valve reed some link???
Yeah sik sound
It's a 66cc my guy
Cool bike! Check mine out!
Your a squid on that thing with no gear on.
Man wtf in ny my country all the motorized bikes go up to 70 or more
I'm in west palm Beach by southern and parker. I have motorized bicycle but I don't know anyone to ride with.