How to fix error code E840-0001 and error location solution is shown as Canon ir ADV 6275/6265/6255.

6075/6065/6055.
Code E840-0001
Fixing Shutter Motor error
The Fixing Shutter HP Sensor (PS53) failed the detection at the Fixing Shutter operation.
Remedy:
1. Check the operation of the Fixing Shutter Gear (overload, etc.).
2. Check the operation of the
Fixing Shutter Motor (M15) at the initialization
operation of the Fixing Shutter.
3. Check the detection of the Fixing Shutter HP Sensor (PS53)
if the Sensor operates normally).
4. Check the drawer of the Fixing Assembly and the host
machine.
5. Replace the Fixing Upper Unit and the
Fixing Drawer Harness Unit.
6. Replace the Main Driver PCB (PCB2) (check the fuse (FU11).

[@vimalchaudhary4365]

Aapka Vedio Kaphi Helpful hai

[@StephenArmah-rm5qc]

I’ve changed complete Fuser still

[@henri417g]

Have you resolved error 263-000 on this copier?
I've already done all the steps in the service manual and the only solution left is to change the very expensive AC driver PCB or the Main driver PCB. I do not know what to do.

[@TechHumayunkabir]

You can try to clean the power, Copier>Function>Clear>pwd-clr>ok
Copier>Function>Clear>card>ok
Copier>Function>Clear>mmi>ok
Copier>Function>Clear>mn-con>ok.
Code: E263-000
Current Sensor error
An error is detected in the value of the Current Sensor (SE601) (the value remains at the upper limit).
1. Check the connection between the AC Driver PCB and the Main Driver PCB (connector disconnection, open circuit, short circuit of harness). AC Driver side: J615, Main Driver side: J103
2. Replace the AC Driver PCB.
3. Replace the Main Driver PCB (PCB2).

[@henri417g]

@@TechHumayunkabir Thank you very much I will try

[@ahmadjunaid5218]

How to fix same error in image runner advance dx 617 i

[@arslandanish7109]

Canon irc 2225 toner ratio adjustment plz tel

[@TechHumayunkabir]

What is the main problem of the machine you want to adjust the toner ratio

[@arslandanish7109]

Light copy problem

[@TechHumayunkabir]

@@arslandanish7109 In this model it is a disease if the toner is not original, applying the original toner will solve the problem. If this problem occurs even after applying the original toner, then clean the developing about magnetic roller with kerosene, you will see a nice copy.

[@alokkumar-sq9ie]

Help me sir ji

[@sunilram4161]

How to resolve E00302-0101 and E00302-0103 error in canon IR adv 6500i series...

[@TechHumayunkabir]

Copier>Function>Clear>R-Con>ok

[@lulucampos1689]

thank u so much sir

[@ganeshnarkhede1025]

paper scan by adf but no fall in tray

[@TechHumayunkabir]

Enter the full details

[@majedrahman351]

Thanks a lot

[@nicecopycenter6475]

thank you

[@chandrabhushan5554]

Good job

[@yogeshm5619]

Thanks boss

[@vimalchaudhary4365]

Thank U Boss

[@kalravpatel8625]

Ir5050 erop 840-001 how to solve

[@TechHumayunkabir]

E840-0001
★There is a shutter error.
While the shutter is in operation, the sensor signal is not detected and, in addition, it is still not detected after 3 retries.
★There is a shutter error.The interval of ON-OFF detection by the sensor in response to shutter operation is shorter than a specific time period.

[@srinivasaraot7414]

Sir please show the error code e820-001

[@TechHumayunkabir]

Developer Upper Cooling Fan error. The Fan stop signal is detected for 5 seconds or longer and retry is failed 4 times in a row although the Developer Upper Cooling Fan (FM31) is turned ON.

[@TechHumayunkabir]

Developer Upper Cooling Fan error. The Fan stop signal is detected for 5 seconds or longer and retry is failed 4 times in a row although the Developer Upper Cooling Fan (FM31) is turned ON.

[@kalravpatel8625]

Not working last two week

[@TechHumayunkabir]

,

[@markoanthonioranolat6849]

Cara memperbaiki Eror SP53 ???

[@TechHumayunkabir]

please send display pictures whatsapp

[@markoanthonioranolat6849]

@@TechHumayunkabir cant i gate number WhatsApp?

[@TechHumayunkabir]

Whatsapp [phone]

[@hamiddjarma9172]

Thanks so much bro ❤❤

[@snapshot12100]

Background noise is disturbing

[@TechHumayunkabir]

My thoughts are that toner is not good

[@majedrahman351]

Sorry to say please make videos little faster.

[@TechHumayunkabir]

.

[@TechHumayunkabir]

@DaniFa ok

[@pravinjadhav5704]

Plz mob. Sand me

[@TechHumayunkabir]

,