Це відео не доступне.
Перепрошуємо.
Making a DIY Inflatable Raft-- or Sunhat-- with Vinyl Cement HH-66
Вставка
- Опубліковано 17 сер 2024
- Link to my website for diagrams, code, and resources to recreate my experiments:
www.beckymarsha...
Buy HH-66: amzn.to/2M7D8LQ
Experiment with me as I build and inflate a big, 4-foot diameter, vinyl raft out of easy-to-find materials and using an arduino-controlled electric pump, a hand pump, and a bicycle pump.
You could use these techniques to build a DIY pool floatie or wonderfully strange inflatable architectures and objects.
I also test out using a small squeeze bottle to apply the HH-66 vinyl cement, with varying results.
I'm working on a StayPuft Marshmallow costume- I didn't want one of those with the pumps that run continuously. I just need a light form to go over my head and shoulders. I thought of inflatables. Great video, I'm glad you posted it. I wish more makers would post their mis-steps. Often they are more helpful than "solutions".
you are the coolest person ever! Love how you're combining physical computing with inflatables !!
Hello Becky, look up a company called billboard tarps. They have the new vinyl fabric material that you want to use that HH-66 with. It is essentially pool vinyl. I use the 20 oz. white material as a waterproof roof covering material for many seasonal sunrooms at a coastal RV park. I am toying with the idea of making some home built, heavy duty swim rafts, and floats, unfortunately that HH-66 isn't cheap, but is sure does give an a nice, permanent, water proof, and air tight seal if done properly.
I found your video searching HH-66. I"m thinking of attempting to patch a vinyl boat. This was one vid that did not look like a glue selling company
This is the way I remembered you. Funny to find you recently in a VAN. :) Well - most pleasing.
This is a great video! Love that you used that Arduino pump.
hi, i found your channel because i was looking up how to make an inflatable tent. I subscribed, but I hope there's more videos since I'm seeing comments form 5 yearas ago.
That’s exactly why I’m here!!! Did you figure it out??? I’m convinced that I can do it and I refuse to pay for it! I mean they don’t even make them as big as I want mine to be! So let’s be friends and figure this thing out!! ❤😂❤
Cool thanks Becky!!
Your cat litter vid randomly popped up. Loved it. Then I checked out your channel. Will subscribe!
ant tips or recommendations on how to keep air in and from escaping?
Hi, what vinyl do you use?
I watched this video because I'm going to 3D print a catamaran that will carry me to work along the canal, while I drink coffee and enjoy the peaceful surroundings.. great vid 👌👍 thanks.. to save weight I wondered if it would be possible incorporate an inflatable seat into the supporting aluminium frame that will keep the boat/pontoons square.. I have to get the boat 300m from the canal to work on foot, so reducing the burden on my glass back is a bonus.. and it at least might slow my sink rate 😁
U are smart asf !! Love it
@Beky Marchall Design, what thickness is that vinyl and where can it be purchased? is it 4mil? can it be purchased on Amazon? working on some pool toy mods
You are AMAZING!! Thank you so much!
@Becky Marshall Design what kind of vinyl did you use?
Working on a replacement top for my canopy. Making it out of billboard vinyl material, and hoping to glue the pieces together.
Everything you do seem so interesting. I'm also interested in doing projects and Inflatables are you still doing this
Hi Becky. I found this video searching for how to make vinyl inflatables. I want to make a leading edge inflatable (LEI) kite. Thanks for the info!
what thickness of vinyl do you use?
Dish soap and water in a spray bottle Will help you find a leak. Plumbers used that trick To find gas leaks. Better yet, considering The project here, maybe a little spritzer bottle Would be sufficient
This is so cool. I want to make a custom inflatable for a friend, so this has been very helpful. Thanks for the info!
I’m trying to make an airtight vinyl vacuum press for my 3d printed longboard molds. I’m deliberating between heat seaming or vinyl glueing.
A little soapy water spray can help locate leaks. Bubbles will pop up where the leak is.
Poovie is a doll.
1:35 life hack for life.
Its a very usefull hack now😅
Were did you buy the vinyl
Outstanding! Working on a diy inflatable tent. Any ideas?
I want to make an inflatable pool for testing kayaks I repair 20 ft X 4 ft at least 18" deep.
I know it's possible but this is the first video I watch to learn where to start.
Thank you for this video! I really want to make my own Bubble Buddy from SpongeBob 😂
you are AWESOME
I am trying to fuse vinyl for ppe.
Hey Becky this is unique content! Very original and exactly what I was looking for, so I am so grateful you have done all the R&D for me already! I must say it did catch my attention that you are a woman. I love seeing female makers on UA-cam at this level of engagement and sophistication. I must say I am quite curious about the place you are shooting this video from, is this a public makerspace? which one? is this TechShop before the bankruptcy? (still hurts that they went down)
Thanks Orwa for the love. This was filmed in the shop at my grad school. Unfortunately they’ve since moved campuses and the incredible shopmaster who made this space so magical also retired. Long live Ed Koizumi!!
I making inflatable dresses for a fashion project and trying to figure out ways to seal vinyl and nylon
Awesome. Leave a link if you document your project somewhere, I’d love to see it
What vinyl would you recommend for making inflatables? A thicker or a thinner vinyl? Or just reusing the vinyl from old rafts?
THICKER! Shower curtains were great and cheap and easy to get. Other inflatables might work but sheet material won’t have stretching etc
@@BeckyMarshallDesign thank you! I’m looking into some 10 gauge vinyl, which seems relatively think that I want to play with. I’m going to be experiments to try to make inflatable frames for artworks. Any recommendations are helpful. I’ll probably experiment with some shower curtains also
@@BeckyMarshallDesign Thanks becky! Where exactly do you source your material from? Is it good to use as a pool float?
I never got to test my prototyped inflatables on water so I can’t make any promises there, BUT with practice (aka after trying once or twice and failing, and getting better at bonding it…) and a perfect seal, I can’t imagine why it wouldn’t support a human in water. If you try it yourself, please come back and leave a comment!
Is this your job btw?
What did you use as the “plug” to inflate from?
how do you put in the inflation valve
Where is ur location
What gauge vinyl was used for this project?
Where did you buy the roll of vinyl?
Never buying tissue paper again.
How do I contact you?
Did you made another one
Do you take custom orders?
I found it after typing diy inflatables
I’m trying to make a outdoor dining cube so I can eat outdoor without contamination from Covid-19. The plan is to pump the inflatable dining cube with filtered air from a HEPA filter machine with its own portable battery.
ooh YEAH!!! XD
I really want to try and make an Aaron's dragon
are you actually wearing a self made inflated suit? looks cool!
XD you're so cute~!
you on Facebook?
Were did you buy the vinyl