Oversized Fork into standard mtb frame - DIY Hack
Вставка
- Опубліковано 5 сер 2024
- I'm working on a new project (wink wink) and ran into a problem about headset Fittings. It's basically how i can fit and oversized fork into a standard frame without going to a machine shop(
Bike Conversion from standard to oversize). But to be more specific i need to use oversized headset both 34mm and 44mm. I got the 44mm sorted as there are 47mm pipes with 44mm inner diameter available in our local metal supply store, but the 34mm is a different story, i tried to look for a pipe with Inner diameter of 34mm or closer. No luck finding a 34mm ID pipe so the nearest one is a 40mm OD with 37mm ID. My idea was to cut a piece of 40mm pipe cut it on the seam, cut off more material to make the ID into 34mm when compressed/Closed the gap to couple the headset cup and the headtube/or 34mm OD pipe.
While i was doing my research on headset fitment, i saw videos about fitting oversized forms into standard frame and saw different approaches/styles some impressive ( • BIKE CONVERT FROM STAN... which gave me the idea about coupling) other videos got me worrying about lateral movement and later on metal fatigue and could lead to part failure. So i wanted to make this video for fellow Pinoy MTB Enthusiasts who have plans to make the DIY mod of fitting an Oversized fork into their standard steel mtb frame
/ 22monfactory
#oversizedforkintostandardframe #standardtooversize #budgetbikehacks - Навчання та стиль
Need your support! click subscribe so you wont miss our future videos. Thanks!☺️
'so we drilled it out so it would fit and with a little help from an a-daptor kit we had that engine running just like a song'... Johny Cash (One Piece at a Time)
Oo NGA Naman sir gawin mung pang benta..na ma convert po Namin ang standard frame Namin SA oversize fork size..more power boss.god bless..
salamat sa pagtanggap nang aking ideya. nakakatuwa naman at nagkaroon kayo nang interes sa aking DiY Hack. Pag iisipan ko po kung panu mapagbuti ang magiging producto nang ito ay maging de-kalidad at sulit bilhin. Maraming salamat sa supporta . Wag kalimutang mag Like at Subscribe.
great clip 👍
thanks for watching the video. Don't forget to like and subscribe :)
thanks for pinoy creativity
thanks for watching the video.
Ang galing nun ah.
Salamat po sa pagpanood nang video! :)
this is what i exacly gona do
Thanks for watching the video.
Converting din ako ngayon standard to os sa japan bike to fixie ko
oi ayos yan orig na restomod. good luck sa build bro. thanks for watching the video. Don't forget to like and subscribe :)
may isa pa akong napanood na video ang ginamit nyang pipe ay may size na 1 1/4
sa shopee may mabibili kang 1 meter long na pipe na ganun ang size tapos stainless pa
Tama meron ganun size sa stainless. Kaso di ko ginamit di pa ako marunong mag weld stainless to carbon steel/chomoly. Thanks for sharing your info. Thanks for watching the video
Gumamit ka ng maayos na gloves sir for your safety. Nice vid❤️ up for this
napalitan na yan hehehe. thanks for watching the video. don't forget to like and subscribe.
Very informative sir.. nice
Thanks for watching the video
Hello sir meron kana bang item para jan para makabili ako gustonko kasi i convert standard fork ko sa os ih
Idol pls mag benta kana sa market nyan waitings ako 😂
Meron nabibiling adapter kaya lang sa ibang bansa nabibili sakto sa standard frame 34mm ang OD para maisalpak ang headtube ng OS fork
Yes Bro meron. Not sure kung gaano ka hirap mag hanap sa us pero meron. at may kamahalan na rin ang price dollars, kaso wala tayo nun kaya DIY na lang ;) hehehe.. Thanks for watching the video. Wag Kalimutang mag Like at mag Subscribe.
boss pwede qo po gayahin yan
nagaaccept po b kayo ng repairs tulad ng vlog na pagcconvert OS Fork sa Standard frame na MTB..
Hi romeo sorry hindi po kami tumatanggap nang repair. Isa lang po akong kapadyak na nag share nang ideas. Para sa mga pareho na mahilig mag diy :). Thanks for watching the video. Don't forget to like and subscribe ☺️
Any recommended tube/scraps po na pwdeng eh substitute sa size ng 40mm pipe na nasa video nyu sir?
Depende kung anu available sayo bro. In my case carbon steel. Yun ang meron at hand e. :)
boss meron akong 44mm na headset at fork yung headset at fork tugma kaso sa head ng bike di kasya anong size ng pipe kaya bilhin ko?
Review mo sa video bro sa first part mga common pipes available sa atin para sa 44mm..ideal kun ganun replace mo buong head tube nang pipe na kasya ang 44mm na headset. Thanks for watching the video. Don't forget to like and subscribe 😜
@@22mon78 Oo kakapanood ko nga lang boss, tingin mo boss okay gawin yon or bile na lang 2nd hand na batalya?mas mapapamahal ba ako or mas mura
What if kung alloy sir
yun! ibang usapan na pag alloy. need na machine shop or kung ay ac/dc tig welding machine ka para maka weld nang aluminum.
Yan ang problema q sa Standard size na 26er q. Pero hindi yan mapwede sakin na procedure kasi pure japanese alloy ang sakin no welds.
Gusto q na talaga mag rigid pero kadalasan mga oversized ang mga steerer tubes eh. 😖
medyo iba nga sa yo bro. need ulit mag measure anu ang current outer diameter nang headtube nang japanese bike mo kung pwede rin yun approach nag coupling.. kung alanganin.. hanap ka shop na may aluminum TIG-weld, tapos hanap ka aluminum pipe na 34mm inner diameter yun pa dugtong weld mo sa kanila.. or kung ayung wall thickness nang alloy headtube mo makapal at pwedeng e bore up to 34mm na hindi pa sobrang nipis (at least 2mm ang maiiwan) mas okay yun, kaso sa machine shop gagawin to. Good luck sa project mo bro. Don't forget to like and subscribe.
@@22mon78 sir pwede ba ilagay Ang 25.4 fork sa 22.2 na standard frame? Ka chat ko kasi Ang Indonesian na seller pwede daw ikabit Ang 25.4 na fork sa 22.2 ,Magpapalit Lang daw ako NG headset.Threaded Po Ang MTB KO at Yong bibilhin ko na 25.4 na fork.totoo Po ba yon?
Pwede bang iconvert na lang sa standard thread to threadless type?
Pwede rin. Pero in this case need ko gumamit nang oversized fork. Dahil yun ang meron ako :) at alam ko marami sa atin may lumang frame standard at maraming extra parts na os pinaglumaan or bigay nang tropa.
So ibig sabihin sir ito lng paraan pra ma gmt yong oversized fork to standard head tube frame sa bike?Kht sa headset wla bang mga sizes na mag fix between oversized fork and standard head tube?
Nasa video bro mga measurements. Sa paghahanap ko sa yt nang nakapag gamit nang os fork sa standard frame using special headset by chris king. Medyo mahihirapan tayo dito sa atin makahanap nun. So the easiest and cheapest way is coupling.
Taga saan u sir pagawa ko din Yun head tube Ng bike
Hi Nardy. Sharing Bike hacks lang bro. Para sa gustong mag DIY. Thanks for watching the video.
Tagasaan po kayo puwede po bang magpagawa sa inyo ng ganiyan?
Testing pa lang to bro. prototyping kumbaga heheh. naishare ko lang para magka idea kayo panu gawin. wag kalimutan mag like at subscribe :)
sir how about naman po ung standard fork sa os na frame pwede po?
hi KM. if there's a will there's a way. baka sa ibang video naman. thanks for watching.
sir pwede ba to sa classic frame ng rb?
hindi ko po sure kung applicable sa rb. standard steel mtb frame lang nasubok. try mo sir measure outside and inside diameter nang heatube. at anu ang magiging final length nang headtube pag nalagyan na nang adapters and headset kung sakto pa rin ang steet rube nang fork na gusto mong gamitin. pag possible pwede nyo pong subokan and mod. take note po ibayong ingat at intindihin ang peligro(risk) sa pag gawa nang mod na ito. Thanks for watching the video..
Sir how about standard size fork sa oversize na headtube
Machine shop pagawa bushing
Pwedi din Po ba ma modify ung wheel size
Yan ang hindi ko pa na try :)
Thanks so much for your tutorial My Brother.
greetings success and always healthy.
Santo from Indonesia Jakarta.
Thank you for the support.
Boss ano size ng pipe nilagay nyo??
Hi arjay. panoorin mo buong video wag mo e skip andyan lahat nang details. sizes nang pipes panu e edit. Wag kalimutan mag Like at mag Subscribe.
Ano mga need or binili nyo dyan lodi?
Nasa video ang mga materials na ginamit. Pwede mo gamitin ang video bilang guide. Ibayong ingat sa pag mo nang bike mo. Salamat!
Pano nmn po i convert ung frame os tps ung fork standard? Pa elp nmn po sir
Hindi na kaya nang poowers ko hehe. Need na machine bro. Need mo gumawa insert sa OS headtube para lumiit ang inside diameter para sumakto ang standard na headtube press fitted. na walang side to side play.
Sakto ata ang 1 1/4" tube dyan pero wala kasi nagbebengta ng ganong size😞
tama bro. limited ang sizes nang tube available dito sa atin. kaya ganito ang diy hack na ginawa natin. thanks for watching.
@@22mon78 sir na try ko na pero imperfect yung circle mahirap medyo oblong, Sana makapagbenta ka ng ganyan
@@22mon78 mahirap Kasi gumawa last time na gumawa ako oblong sya
@@jordandelatorre67 kunting himas lang yan nang martilyo. Hanging maging close ideal cyclinder at mag match sa headset.
Sir, tnx sa vid. May nabili po akong head set na oversized, pinaplano ko po yung cups ay iweld dun sa head tubes. Good idea po kaya ito?
Natry ko po epoxy pero natatanggal sana tinda kayo nitong adapter / coupling na ito sa shopee
@@elieboyymedyo mahirap ibaiba na na kasi condition nang mga standard steel frame meron manipis due to age, ear and tear. kaya pinakita ko na lang ang paraan para macustomize nyo and tamang size na walang play and headtube pag nag preno. pagiisipan natin kung feasible gumawa nang pang benta.
wag yung cup race mismo and e weld baka mag warp and cup race. at mawawala ang pagiging replaceable item nang cup race if ever.
try niyo gumawa ng pambenta niyan hehe isa ako sa bibili niyan dahil namomroblema din ako sa frame at fork ko
dumadami na kayo nagsusuggest. pinag iisipan ko na rin. :) Thanks for watching the video. Don't forget to like and subscribe.
@@22mon78 lesgo na sir tamang negosyo den
@@imoooff2563 thanks for the support!
@@22mon78 gumawa po kayo pls tapos open kayu ng shop sa shopee marami naghahanap ng ganyan plssssss
Gawa po kayo nyan sir then benta niyo sa shopee hehe gustong gusto ko na e lagay rigid fork ko sa mtb
Kaumay no pre, sakin kasi di rin sumakto eh😂
Bale sayang yung fork nyan hsha
Anong fork yan bos at san mo nabili?
Rigid fork nabili ko lang sa fb marketplace. Thanks for watching, don't forget to like and subscribe.
Nag rerepair kau ng cracked headtube
Hindi bro. Personal bikes ko pang to. Ginawan ko lang video para ma share mga alternative solution. Thanks for watching the video. Don't forget to like and subscribe ☺️
Boss meron ka bang fb page? Para kapag may tanong kami dun ka na lang imemessage?
Search mo lang sir sa fb 22mon factory. Thanks for watching the video :)
Pwede ba sa standard alloy frame yan?
Ibang material bro.. need mo aluminum na tube at kailangan mo rin tig welding machine pang weld aluminum..
Boss may link kaba nung headset?
wala pong link nang headset bro. puro locally available headset lang nadiscuss sa video. Thanks for watching the video. wag kalimutang mag subscribe. :)
Boss please lang gawin gawa ka tas benta mo
Nasa planning na. Update ko po kayo :)
Sir pabili nlng ako ng gawa mo,bigay klng ng price.😎😎
salamat po sa pagkakaroon nang interes na bumili nang gawa ko. nakaka encourage po sa patuloy na pag gawa nang mga video tulad nito. Thanks for watching the video. don't forget to like and subscribe.
@@22mon78 inform nyo po ako sir pg available n po gawa nyo..need ko po kasi..asap. maraming salamat po..
Sir pbili ng gawa mo..plss...😊😊
Nasa planning na. Update ko kayo :)
Pinahirapan mo lng sarili mo sir.. hehehe.. ang panget ng kinalabasan d yan advisable sa mga bikers
Thank you for your input. Very honest and no filter. Mabuhay po kayo sir. Thanks for watching the video.
@@22mon78 sensya na po sir.. with that procedure mapapagastos klng.. mhal pa nmn labor sa mga machine shops.. ska dpat ang ginawa mo po ung buong tube dpat ang pinalitan mo.. no need na mag duktong ng dalawang extra tubes sa taas at baba.. gnun lng po ka simple.. tnx
@@chealsyh.rodriguez8096 tama ka sir yan ang best way. Kung meron tube na eksakto ang size. Pero dito sa atin Pinas hindi lahat may available na exact size nang tube. Ang diy na ito ay para sa mga kasiklista natin na medyo nagbubudget naka standard steel frame lang, naka bili or nabigyan nang oversized fork.
@@22mon78 Mas ok yung ginawa mo sir. Tama ka mahirap humanap nubg exact na size nung tube. May ibang mga tao tulad ko na mas gusto i modify yung luma dahil sa sentimental value. Kahit afford pa namin ang bagong frame.
May Facebook ka papatulong ako