Great result man. I made similar 320ish whp with my rb22et back in 2016 but on higher boost 21-22 psi with smaller 5052 sized holset hybrid hx35/hx30 twin scroll turbo set up. If your having ignition timing issue it may be better to switch to crank trigger set up. On my rb22et with crank trigger ignition timing has always been consistent.
Wow man. I'm doing the RB20ET swap to my Miata right now, any recommendations to address it to make it right ❓ and a question which injectors did you use❓
Sadly the cam module / distributor CAS are pretty bad for timing scatter on the 20e and 30e. A rb20de head with proper CAS will solve that issue plus it won't have the hotspotting issue that the single cam heads may or may not have.
So the dizzy has a cam angle sensor inside it so i used the signal from that to tell my ecu the engine position. You can then just take out the rotor and all the leads obviously. I then have a bosch coilpack which has 3 coilpacks with 6 outputs. Its a bit confusing but its wasted spark so ecu only needs 3 wires to it. They go to the igniter as they are not smart coils. Its a generic nzefi 4 channel igniter that im only using 3 channels on. Dm me on instagram @bigstyle_laflare if ya wanna know more 🫡
looking to turbo my rb20e, what size injectors are you using? could you drop a whole parts lists or do a detailed walk through video at some point? thanks!
Because thats boring. Rb20 sounds better, was already in the car and its fun to try something different and see what the capabilities are. If i wanted big power i wouldnt choose an rb30 anyway.
Definitely the best sounding rb20 ive heard, sounds incredible man!
Great result man. I made similar 320ish whp with my rb22et back in 2016 but on higher boost 21-22 psi with smaller 5052 sized holset hybrid hx35/hx30 twin scroll turbo set up. If your having ignition timing issue it may be better to switch to crank trigger set up. On my rb22et with crank trigger ignition timing has always been consistent.
Wow man. I'm doing the RB20ET swap to my Miata right now, any recommendations to address it to make it right ❓ and a question which injectors did you use❓
@@jorgeluisburgoacosio9998you should make vids on it I have a 20e I’m considering turboing
Award for the best sounding 20e
I reckon Sammits got you 😉 haha
But loving the build dude. Everyone else has done twin cam RB's and rb30. This is different. I like!
Worlds most powerful and worlds best sounding 20e 🎶 Great build!
Sadly the cam module / distributor CAS are pretty bad for timing scatter on the 20e and 30e. A rb20de head with proper CAS will solve that issue plus it won't have the hotspotting issue that the single cam heads may or may not have.
Mean bro well done ! Wicked setup
The 20EGOD plate sheeeessshhh🔥🫡🤣
Aye i know i had to find a trini best driver taxi laurel men dem lurking🤣
@@meatsauce8454 it's good research
@@MariTheMenace very tru sammit did it also could look at that also
@@meatsauce8454 thanks bro I checked it out
Ripping! Congrats man!
Congrats bro. Cant wait to see what you do with it🔥
Wish I can get some hand me down parts.....to try on my c33 because I love these engines
Hey man, mind running through your final ignition setup?
As in the dizzy>cop conversion and components used. Thanks!
So the dizzy has a cam angle sensor inside it so i used the signal from that to tell my ecu the engine position. You can then just take out the rotor and all the leads obviously.
I then have a bosch coilpack which has 3 coilpacks with 6 outputs. Its a bit confusing but its wasted spark so ecu only needs 3 wires to it. They go to the igniter as they are not smart coils.
Its a generic nzefi 4 channel igniter that im only using 3 channels on.
Dm me on instagram @bigstyle_laflare if ya wanna know more 🫡
Whats that out of it noise after every pull ? Is it a auto
Nah manual i think its just the way the dyno works
looking to turbo my rb20e, what size injectors are you using? could you drop a whole parts lists or do a detailed walk through video at some point? thanks!
Check my channel for previous videos showing the build process, iv tried to document everything. Injectors are 875cc
Thank you!@@JackBatchelor33
Big fan
Would you send me some specs on the parts you used???? Please
@@BrandonJay1983 dm me on instagram @bigstyle_laflare, ny previous video “go fast bits” shows most of what i have used though
I reckon you should drop an 4g63 plus t in it lol
What fuel u giving her?
Bp98
RB20?? WHY? if you must play with this stuff get an RB30 than fit the hairdryer.
Because thats boring. Rb20 sounds better, was already in the car and its fun to try something different and see what the capabilities are. If i wanted big power i wouldnt choose an rb30 anyway.
@@JackBatchelor33glad ut stickin with the 20e manee🫡
go look at sammits bogan 32
What fuel are you running ?
Bp 98 octane