Burgman 650 - DIY - Clutch Rebuild Part 2
Вставка
- Опубліковано 10 вер 2024
- This DIY covers Part 2 of the Clutch Rebuild project for a Burgman 650. It illustrates the steps on how to reassemble the clutch pack and install the clutch basket, gasket and clutch cover.
Le dude, thank you I've successfully replaced my clutch parts , please make a video on CVT too. God bless you 💞 . torque for the clutch washer is 70 N m.
Your information base is awesome, I wished that there was info like this for the Yamaha Majesty. great vids and stuff to read on your site.
Hi ! I have a question please. This 4 springs that shown at 03:15 are responsible for dis-engage the cluch plats (at full stop) and the rollers that shown at 01:26 are responsible to engage the clutch plats when start do accelerate as the whole assembly start to spin by the RPM's. My question is Am I right ? this is how it works ? I have a slipping clutch at my Burgman 650 - and I want to ask if I'am correctly understand this specific centrifugal clutch assembly. Thank you for your time.
türkiyeden selam baskı balata kaç kilometre götürür
Hey,
During the trip, I felt vibrations from the rear wheel and then gear noises ... after two minutes I stopped at a traffic light and I drove on and gear stuck on the first gear and in no way puts out ... Does anyone have any idea what's wrong and how to fix it?
At 15:08 is that a cut off clutch housing your using as a tool? I made my compression tool using 2 pieces of PVC pipe, only thing I could find but works great.
How can I make the same compressor tool ?
What’s that cup thing you use
Fench you for clip brother👍
LeDude,
Between parts 1 and 2, did you buy new plates? I'm not sure what "rebuilding" means exactly; just taking it apart and putting it back together?
my burgman runs but not drive. it is the belt or the cluch
What kind of oil is used?
Hola mi estimado que este bien, Pregunta: Cuántos "DISCOS y PLATOS" trae el Sistema de "CLUTCH", de una Moto: Suzuki Burgman AN-650 año:2003, saludos desde mi País COSTA 🇨🇷 RICA, PURA VIDA.✌️😀
Got any more info on the DIY tools like dimensions or materials used? I have to do this clutch job this weekend and would like to know how to make those tools thanks!
CHECK PART 1
plz made some mor