Seville Classics® | UltraHD® 36" Storage Cabinet Assembly

Browse our products at www.sevilleclassics.com/ !
0:00 Storage Cabinet Introduction
0:10 TIP: Assemble the cabinet on the flattened cardboard box to protect the cabinet parts and the floor from scratching.
0:15 Step 1 & 2: Assemble the Side Panels, Left and Right.
-Align the Left Upper and Bottom Side Panels. Place the Side Panel Reinforcement Connection Part over the touching panel edges and tighten the top and side screws.
-Repeat for the Right Panel.
0:30 Step 3 & 4: Assemble the Doors, Left and Right.
-Align the Left Door Upper Panel and Left Door Bottom Panel. Place the Door Panel Connection Part over the touching panel edges and tighten the top and side screws.
0:51 Step 5: Install the Key Rod in the Right Door
-Twist out the pre-assembled Screw L on the key rod linkage plate.
-Insert the Key Rod into the bottom tab hole of the right door bottom panel.
-Attach the Key Rod by lining up the screw hole and tightening back in the Screw L.
1:01 TIP: Door keys are tucked in the Door Handle.
1:06 Step 6: Attach the Top Panel to the Left Panel and Right Panel.
-Align the Top Panel to the Left Side Upper Panel and Right Side Upper Panel.
-Line up the screw holes and tighten.
1:23 Step 7: Attach the Bottom Panel to the Left Panel and Right Panel.
-Align the Bottom Panel to the Left Side Bottom Panel and Right Side Bottom Panel.
-Line up the screw holes and tighten.
1:34 Step 8: Attach the Back Panels.
-Align the Bottom Back Panel to the Left Side Bottom Panel, Right Side Bottom Panel, and Bottom Panel. Tighten with screws.
-Attach both Middle Back Panel above Bottom Back Panel by placing the groove of the Middle Back Panel onto the top edge of the Bottom Back Panel. Tighten the screws.
-Attach Upper Back Panel above the Middle Back Panel. Tighten the screws.
1:54 Step 9: Attach the 4 Wheels.
-Install the 2 wheels with brakes to the front of the cabinet and the 2 wheels without brakes to the back of the cabinet.
2:08 Step 10: Attach the 4 Corner Protections.
2:15 Step 11: Attach the 4 Bumpers.
2:18 Step 12: Attach the 2 Magnets.
2:27 Step 13: Install the Left and Right Doors.
2:32 TIP: Loosely tighten the door screws while centering the door. Completely tighten the screws when the door is centered.
2:35 Step 14: Attach the Shelf Hooks and install the 3 Adjustable Middle Shelves.
2:38 TIP: Make sure the hooks supporting each shelf are at the same height.
Load Capacity: 600 lb. (150 lb. per shelf)

[@marb433]

Such a clean and helpful job in 3 minutes!