How to install Bluetooth MP3 Player Decoder Board 12V?
Вставка
- Опубліковано 14 жов 2024
- In this video, we will see what is Bluetooth MP3 Player Decoder Board? how to convert old cd player to usb player? What is CAR MP3 Module? with Remote Control FM Radio TF USB AUX Module Car Kit Audio Amplifier Board MP3 Player
-------------------
📢 Subscribe Channel: / @newtecpro
-------------------
How to install the power cord - How to install the stereo audio output wire - How to connect the 3.5mm AUX plug - How to connect to the audio input of the amplifier module - How to connect to the RCA plug
-------------------
This tool is used in this video:
Bluetooth MP3 player module: tinyurl.com/4z...
6 and 12 volt power supply as an example
Wired adapter female plug
AUX 3.5mm male plug and AV male plug and amplifier module
-------------------
#MP3_Player #Bluetooth_MP3_Player #Bluetooth_Player #usb_player #CAR_MP3_Module #MP3_Module
-------------------
❤️ If you liked this video, please like this video and follow our channel.
☑️Also support us by sharing the video
📢 Subscribe Channel: / @newtecpro
Twitter: / newtecpro
Instagram: / newtecpro
Email: newtecprof@gmail.com
Only one doubt that :: can can connect the audio out from the board to female aux port and connect headphone it and use it as mp3 player
Yes, you can use it for headphones. (It is better to use a real 5V 2A power supply) but it cannot be connected directly to the speaker.
@@newtecpro Thanks buddy ! But i can use it with pre bulid amplifier board headphone only right? Thanks
@@gokuld6350 yes right
Is it possible to use desktop speakers with the Bluetooth board plug in desktop usb into the usb slot and 3.5mm into aux?
You can use this USB player module for any audio device that has an AUX input
It is enough that the speaker or audio system has an AUX or AV L/R input.
3:39 where can i get that input amplifier? And also can i just put the speaker directly without needing that input amplifier?
I'm just new didn't know about that
No, you cannot directly connect the stereo output to the speakers. The stereo sound output must be connected to the sound input of the amplifier.
The 3-wire connector is actually the stereo output
Does this device work on a voltage of 5 to 12 volts, which means that it will work on 7v?
This device has different types. Most models have a regulator and you can give them 5V or 6V or 7V or 8V or 9V or 10V or 11 or 12V DC as input.
Great Video, Thanks
Can I feed the Audio Output to the AUX input of a typical Bluetooth Speaker ?
Thankful. The audio output cannot be connected directly to the speaker. The AUX audio output must be connected to the AUX audio input of an amplifier or audio system
@@newtecpro Thanks
I've just bought 1 without battery in it's remote where can I buy,and what type,thanks.
The remote control of this device uses a general battery. 3 volt CR2025 coin cell battery
Does the AUX port support headphones, or is it just an entry port for data?
In the front part, there is a 3.5 mm AUX jack on the panel as an audio input, which you can connect to a 3.5 mm AUX cable. Then change the device mode to LINE mode
@@newtecpro
This is a data input port. but this does not support headphones, unfortunately.
@@mohmad2822 To use headphones: Connect the 3-wire stereo audio output to a 3.5mm AUX female jack. Then connect the headphones to this 3.5 mm audio jack
@@newtecpro
I've been thinking about this.
but how do I make my phone's mike work while connected to Bluetooth?
I mean. I'm going to connect my headphones to an MP3 Decoder and have my phone send the audio data via bluetooth to that device. but when I'm calling my friend, I want to make my phone's mic work while my headphones are on.
so how do I do this?
@@mohmad2822 This is not possible. You should probably use a Bluetooth audio transmitter. In the future, we will post a tutorial on how to use the Bluetooth transmitter module on NEWTECPRO's UA-cam channel.
What is the size of the jst cable that connects to the board of the kebidu mp3 player?
What do you mean by JST cable?
@@newtecpro the size of the cable
@@Sefer_9877. The size of the cable does not matter. It can be any size. The point is to use a shielded cable
Thank you . I will subscribe to your channel
thank you. There is a new video on this topic on the channel, which I suggest you watch:
ua-cam.com/video/4JkQIREw70o/v-deo.htmlsi=7y3eXNwYzcik_YbA
is it okey if this directly connect to a motorcycle battery that is 12v?...
Motorcycle power may fluctuate. To solve this problem, it is better to use a voltage reducer module. Set the voltage to 9V.
Watch this video, the explanation is clear: ua-cam.com/video/RAbTdeLU2JQ/v-deo.html
You just earned a subscriber
Thank you for your encouraging message. I hope you can provide new and useful videos on the newtecpro channel and also share your comments and criticisms with us.
do you make this with a green display?
No, so far all the models that I have have a red screen with colored light dancing
Bos anong adaptor gamit mo watts/amp? Thsnks
Use a 5V 2A adapter. It's better
@@newtecproIs it okay to use 12v adaptor directly?
@@newtecproBecause i ordered a bt decoder. Then i use a usb wire charger as a adaptor(phone charger wire). When i use it, it kepts saying "low battery".
@@oodamarasengan7415 MP3 player decoder models have an input voltage of 12 volts and some have an input voltage of 5 volts. The model you bought may be 12V. So you need to use a 12V 1A DC power supply adapter
@@newtecpro yeah i tried earlier. It didnt work. I connect + and - but still. I may cooked the board of the decoder but i just bought a 12v 1a adaptor.
Sa speaker ba yong tatlo na wire
These three wires are stereo output. Right channel + left channel + common GND. These three wires are connected to the sound of the amplifier or audio system
3:40 what is the name of this board
The name of this product is TDA7388 4 channel amplifier module
@@newtecpro Thanks
Where the bass mounting system is and how many boxes can be fitted on this board, can you create a video for this please 🥺
ok fo Bluetooth but unable to find out how to lock in radio stations
First, set the device mode to FM radio. Then pressing V+ or V- key will start searching for FM radio. Automatically connects and stops if it finds something.
How much Bluetooth speaker po
The price is about 1 to 2 US dollars
how much poh
Prices vary. But it's about $2
@Tokyo-ks3ny It's about $2
😊
thnx
Mujhe yechaiya
thnx bro
Bro it's not need amplifier
Hello. The MP3 player module definitely needs an amplifier. The output sound must be amplified by an amplifier or audio system. You cannot connect the output wires directly to the speaker.
Unless it's a headphone speaker
Please I need Bluetooth
This product is our MP3 player with Bluetooth sound
👌👌👌👌👌⚡⚡⚡🚾🚾🚾🚾🚾🚼🚼🐺🐺
দামকতটাকাভাই
It costs about US$2
Ll
Yes, you can use 2 lithium-ion batteries with an output voltage of 3.7+3.7
Very bad video
Hello. Thank you for your opinion and criticism. Please why was the video bad? How can you make better videos?
@@newtecpro hello.
I don't like to make videos
You must talk to explain you must speak and never depend on only photo description and finally you have to show me the finally result to teach people with no experience . thank you
@@mustafaaboelsaud4341 Thank you very much. We are trying to make our videos better. Your comments are important to us.
Does it support RANDOM play of music files?
No, unfortunately, there is no random mode
Nonsense video
What is the problem with the video please? How can you make the next videos better?