Thank you guys for all the great ideas on this video! I hope it helps you buy tools SMART!!! What else do we need in the collection? Also here is the full list of tools from this video ~ bit.ly/4fp4co2
Flip socket set or 1/2 drive deep impact socket in 19, 21, & 22mm for wheels off/wheels on. I also think the set needs more combination wrenches. The big Husky set skips 13, 14, 16, 17, & 19 mm wrenches. Some of those are needed for drain plugs. Great effort at making the set!!! Merry Christmas!!!
For $67 tractor supply has the 87 piece gear wrench torx and Allen master set I bought a few sets for people I know who work on German junk. For just $30 they have a 40 piece set of gearwrench torx and allen bits still a fine set .
@@HumbleMechanic check out the hyper tough pry bars at Walmart they are made by Wilde tools in the US. And get yourself a Ford truck so you can tow around those broken German cars.
A 18.5/ 19.5 millimeter lugnut socket for Ford/Chrysler/GM lug nuts that swell up from rust (even outside the rustbelt). Replace the Harbor Freight die grinder with a Husky (it’s not much more $, and is much, much more durable, i used to go through 4 HF in a year, Husky hasn’t broken in 3 years). A 1/4 torque wrench, newer engines use really low torque specs and a 3/8 inch doesn’t go that low. A “whip” type swivel for the impact gun instead of the 90° swivels you showed (they choke the hell out of the airflow). A mechanics stethoscope (the Lisle is my favorite because I can swap the probe end with a 3 foot long tube (just a piece of pre-flared brake line), which is very handy for locating exhaust leaks.) An extension cord WITH YOUR NAME ON IT! (Never to be loaned to another technician under any circumstances! If you loan your extension cord, it immediately becomes “our extension cord, comrade.”) Air tool oil to keep all the air tools in top condition internally.
As a young man who doesn't have a dad or guidance this Really helps point me in the right direction. Thank you for your time & Knowledge Humble Mechanic. Keep it up
I remember when i first started wrenching at a motorcycle dealership i walked in with one small briefcase looking tool set and 1 breaker bar. Now 3 years later I have a good tool box with about x5 the tools i started with and no snap on debt LOL
Bought 200 dollars worth of tools and tool box brand new and worked at a motorcycle dealership for years and did very well. I also worked at a car dealership from the same toolbox for years. Point is you definitely don't need expensive stuff to pursue your career. Work on your craft and talent, don't worry about expensive tools.
I currently get 50% off snap on tools because of what I’m studying in college not one of my tools are snap on for the price of one ratchet I can get a decent brand full socket set that will work for many years
@@chefbgordon8892 exactly, I have had cheap harbor freight ratchets and sockets for years, I did a full engine rebuild, manual swap and suspension work with them. All of them are still working
$200 would be tough in todays money but I 100% agree with your point. It is wayyyy too easy to get caught up with collecting tools and the toxic culture propping up the tool trucks.
A couple really good tips I found in buying tools: - Japanese tools from Koken, Engineer, Nepros, Vessel, etc are as good and often times even better than their snap on equivalents and priced fairly. Typically a Japanese tool is a third to a tenth of the price of its Snap On equivalent. Warranty claims can be hit or miss, but Koken does have a facility in Massachusetts and they handle replacements. That said, I haven't needed any replacements for any of my Japanese tools. - Gearwrench punches way above their price range in terms of quality. Their ratcheting tools are top notch and Home Depot will typically replace the tool under lifetime warranty even if you didn't buy it from them. - Pawn shops are full of old American made tools and they'll typically negotiate way below their listed prices since they take in such a high volume of old tools. I put together an old Craftsman socket set and paid 5 bucks for a 12 socket set that I use almost daily.
I'm glad there's more people that appreciate Japanese products! Such a great culture and I'd rather buy Japanese then this rebranded Chinese steel SHIT coming from here in "America" and IM AMERICAN!
That's what my first boss told me to make sure I got, a good scraper, and a good punch set, definitely helps in alot of different scenarios, pry bars to
I lost all my tools in a house fire 2-18-2022. I will say that it’s no fun buying all the tool’s again. Remembering when I first bought them and how excited I was doesn’t happen twice. It warms my heart to see someone who is helping other out. Sure it’s not the same, but it is in many ways. I know whoever ends up with this will definitely be stoked! Thanks for helping out the future, and keep up the great work. New subscriber here and love the channel
I'm a DIYer and am still learning. Since I didn't really have someone to ask how to do things, I tended to break stuff... like bolts, or round off nuts trying to get them off. Maybe this isn't an issue for young technician but I would think the set would need a set of extractors. Also, I have a small propane torch I use all the time. Again, maybe shops provide real torches so it's not needed but I certainly benefited a lot once I got it. I actually wish I had seen something like this video 5 years ago when I started my adventures.
Agreed 100%. I’m a new-ish dealership tech, and even though I think that extractors (and drill bits for that matter) can be very dangerous in inexperienced hands, they are necessary at times. Gotta be able to make holes, gotta be able to remove the bolts that “the last guy” messed up.
I just DIY but I have a whole drawer (or maybe two) full of extractors, bolt outs, drill bits, etc. Once a car reaches a certain age in the rust belt, I'm almost reaching for extractors or bolt outs more than regular sockets.
what might be good advice for you is that you should hit stuff with a hammer. I work on semi's and in 99% of the cases where i can't get a bolt loose, i just smack it with my hammer hard 5-10 times and it'll come out no problem. Way quicker than heating stuff up and you won't be getting burnt while trying to get that bolt out
@@kebrownnov2993 i'm the go to guy in our shop to get bolts loose, and in over 90% of cases it will work. Sometimes you do have to apply heat/freeze it to get it loose though
I've worked as a mechanic for close to 10 years. Great video! A couple things I'd recommend for newer technicians is to look at used tools when starting out to save money. Something I think that is very important is using 6 point sockets. I work in an area where rust is prone and 12 point sockets/ wrenches can easily round fasteners.
Whole heartedly agree. I have scoured FB marketplace for tools and have found some (U.S. made) hand tools that were cheaper than the new imported equivalents; and all in very good condition. Estate sales is another source that comes to mind.
This is so cool, we have just hired a second apprentice and although we’ve already begun assembling a tool kit, this video will be a great reference. I’ve been eyeing these boxes every time I walk through Home Depot. Thanks for this Charles!
The Husky box sets are God awful, I had to help a friend pull an engine at a u pull. The ratchets are awful the sockets are loose for $100 more the gearwrench sets are miles ahead even the $100 set from hart at Walmart is better. For a beginner I'd buy straight metric shorts and deeps from tekton, Milwaukee or HF Milwaukee has a set of impacts on Christmas special for 99 at HD plus they are thinner walled like snapon so you can get into tight wells and against frames Full set of combo wrenches 8-at least 24 Milwaukee has a nice set no skips but HF also has some decent sets the Husky are too thick for some spots. Then $67 buys you the 84 pc gearwrench torx, e torx and allen set at tractor supply. The pry bars at Walmart under hyper tough are usa made Wilde tools At HD they have an adjustable pry bar made by crescent that works great on cv axles But the bulk of what carl talks about in the video is good stuff
@@redneck4528’ve had the exact same husky set for over 7 years working on cars and 4 years working on Audi specifically and never had a problem with them. Never once needed any other brand including snap on or the likes.
@@jonathonlacey3833 maybe they changed, the wobble in the ratchets and looseness in the sockets in this years set was atrocious. The Husky sets I've used before were Stanley level quality which is ok. Something changed.
Thanks Charles, I’m only 15 years old but have started wrenching on cars. I’m a little underage of course but I do most of it at home. Cars and off-roading. I have been taking you videos into recommendation. Building my setup at home next to my mothers. Keep up the great work.
Next toy your Mom? WoW, my Mom a gear head also. I'm 44 years old. I love going to car shows with her. She looks under the hood and starts talking. The Men standing around, stare at her as if she sone Goddes hahahaha. God Bless You Youngin, enjoy the time and memories with your Mom. We all only have one.
@@cuinican1980 This comment kinda creeped me out ngl, like how do you make a joke like that to a 15 year old lmfao, like what? i cannot be the only one that finds that a little bit fucked up.
I’m an electrician, this is a good set for a young mechanic. It’s good to see some of the seniors helping out the younger guys. I have used the General roller box before and loved it. I’m a DIY mechanic for my own vehicles and like some of the things your showing especially the scan tool I have never used anything but a basic OBDII scan tool.
Nowadays you need to be able to do special functions and program when needed. Nowadays you need to be able to read TPMS sensors, 02 sensors, get Data for coolant temp, what the thermostat is doing, MAF, EGR, there's a lot more to it besides just reading and clearing codes, that's what separates a mechanic and a technician.
@@kebrownnov2993 yes and no. Tech at a dealer with high end scan tool couldnt diagnose an o2 sensor on my van. If he knew how to use an oscilloscope he would of found it as well. Programming functions tho, your hands are tied.
That being said , I wouldn't wish being an auto mechanic on my worst enemies. Lowest paid and worse conditions. I would never and have never worked a job that would ask me to buy my own tools for work.
I really want your book,but in PDF Sir, because of "field needs", where is really not comfortable and respectful to handle a book with oily hands :-( But as far as I know, I can not buy that :( And Iam from Europe, so Iam basically screwed anyway :(
Brother give glory to Him who deserves it. Jesus Christ. We help others not because it makes us or others feel good but because we honor our Father in heaven when we do this. We do good to others only because we as fellow believers in Christ are empowered to do so by His Spirit. Love you and pray for you frequently. You’ve been a tremendous blessing on me and my family! God bless you brother
Just started building my kit got hired as a diesel tech for GSE maintenance at an airport this video has really helped me out to see what I need and price points although I made a goof my first week and bought a SNAPON air impact for $650 off the truck but this video has helped me learn my lesson
We used to own 2 collision shops, I came up with the same idea a few years for new techs in training. We would front the cost and if the tech stayed with us for a certain amount of time it was theirs to keep. It ended up working out great!
The only thing I can think of to add right now is snap ring pliers. They aren't needed often, but when they are, they are great! Oh, and a spark plug gapper, and feeler gauge set. Everything else is awesome. I'm not an apprentice, but i do tend to do a lot of work on my own vehicles, be it 2 wheels or 4. My buddy, however, has been a diesel mechanic for going on 20 years, and he has helped me out a lot. There were things I was going to suggest, like the $15 light, then you happen to mention it. It's be a great drop light, and got a ton of use when rebuilding my front end. You are also correct about having the right tool, vs something that will work. I had to modify a 4 pin spindle nut socket into a 2 pin because no one in town had the one I needed, and ordering it would take too long. Also, no one had the correct size socket to take of the nut for my bottom ball joint. I had to buy the biggest channellock type pliers I could to get the best grip on that nut. It was a PITA, but worked. Having the right socket would have saved alot of time.
Bro I’m 3 months into my tech career, and I walked in with 500$ worth of the very basics and I’ve already built up a 9k+ debt with tool trucks to have everything that I need and some little stuff from HF. This is awesome and is definitely a great place for someone to start their career with.
Thank you for doing this, humblemechanic. As an instructor, I appreciate a seasoned tech looking out for the next generation. We need more of this in the industry. That is an incredible start up kit that will allow a young mechanic a successful start. I hope the young person to receive this box will pay it forward in the future. I have only recently come across your channel and you have a new follower.
Keep an eye out on the 308 piece craftsman set. It goes on sale at ace hardware/lowes for 199-249 and it all comes in plastic trays meant for a toolbox. The sockets come with some of the bigger sizes (up to 24mm and 22m in 3/8) its one of the best starter sets in my opinion for the pricepoint if you can snag it on sale
This is what I like to see especially in this industry. I went back to doing diesel a year ago and started a new box just about everything came from harbor freight and still does. I still pull and rebuild engines just fine. Thank you for what your doing and showing.
a tool i think is a must have for a new tech is hose pliars, the $15, 3 piece set from Harbor Freight are great, (Long Reach Hose Grip Pliers),they help out a ton, there are nicer ones on the market, but for $15 they cant be beat for a beginner. mine get used almost daily.
That's a very nice beginner set and whoever ends up with it will be off to a great start. One thing I'd recommend (I'm sure everyone watching this video will have an opinion on 'just one more thing') would be the Gearwrench 3680 serpentine belt tool set. It's a great value at $60 and has applications far beyond just serp belts. Also 100% agree on the Allen wrenches. Nearly always prefer a bit socket. Also don't need a fancy multimeter, just something basic or even just a 12v test light at first.
I think you have fantastic ideas on tools. I have to give a nod to the M12 tools. 1) Size, they're perfect for 90% of every fastener and get in small spaces and less fatigue. 2) Electric is portable. Meaning in car. Travels in a bag. Outside work. Friends car on side of road. Air tools are going the way of the Dodo with rare exception. Necessity for smart work, not just cordless. Pry tools for trim and hose clamps, insanely useful for quality of work/not breaking things. Bits... Never enough sockets or bit adapters, universal joints, shallow etc. Same as small ratchets for spark plug nightmares. LED lights, one of the greatest improvements with magnetic mounts. 1/2" tools for serious work. And ratcheting wrenches, can't have too many. Esp Swivel head.
I can’t say this enough,this is a great video! I’m a DIY car guy and thanks to this video it made me realized what tools I have and what I didn’t have. This video encouraged me to buy Milwaukee combo kit (impact driver/drill) which I got free 50 bit kit and a free 3/8 ratchet . Definitely a game changer for me for $250 out the door
You sir are a class act. If I had you as a mentor as a 20 somethin I may have stayed in the auto tech field. I have zero regrets on the route I ended up taking but I LOVE the idea of what you are doing. KUDOS!
I had an awesome mentor too and he’s still someone I consider a friend but bad employers pushed me away from the field, I love construction though, plus I got to buy different tools and that’s always good
Great calls on the caliper and trim kits. I've used both for my independent stuff a ton and they have made me way more money than I have ever paid for them. The other nice thing about that caliper kit that rules is you can put the flat face on it and use it to press in standard pistons as well.
I would recommend adding a stethoscope, I have found them useful for pinpointing the location of various sounds. Great video and list of tools for starting out!
I’m an apprentice Diesel tech, I have that husky mechanics set. And I have definitely put those sockets and ratchets through their paces. The only thing that was unfortunate was the combination wrenches, it skipped around on sizes. But other than that, that kit is pretty good for budget.
I'm a beginner level auto tech and I have an older version of the set where the drawers didn't lock in place but the set hasn't let me down besides the occasional drawer falling out.
Heya, Just my two cents but, The mechanic set that is most versatile with the price is the Craftsman 450-piece tool set, it's what I snagged for about 200 $ and I genuinely love the set. I mostly work on BMW and the kit includes Torx, 12 points, 6 points, 8 points, and even some E-Torx!!! I firmly stand by the craftsman warranty and if you're near a good lowe's they will automatically warranty the item. The organization is very good. I will say the tools aren't the best but the warranty will invariably replace them if you try and put them up against something tough. Hope this helps Charles!
That snap on comment about paying things off forever is so true. I bought a bag of beef jerky and a Snap- On hat that I’m still paying off. It’s been 3 years already.
Just started out in my first dealer tech job at 18 at a Hyundai dealer. This is so helpful not only showing what kind of tools might be useful for me to buy and build slowly. Thanks Charles. This helped so much.
When it comes to some tools like wrenches on ebay you can get snap on tools for fairly cheap, not as cheap as some other places but it still makes a huge difference
Buying used tools in general will save a ton of money. People get sets as gifts then never use them or they buy a bunch of tools thinking they like to wrench then find they don't have time or it's too much trouble. I buy tools when they are on sale or when I find them used if I can. I only buy new at full price when I hit a roadblock and need a very specific tool.
I’ve been doing the same, I’m a boat tech 3+ years in. I bought pretty much all of my beginner tools at harbor freight and I’ve been slowly upgrading and adding over the last couple years
Just wanted to say I have an older version of the 290 piece husky toolbox that I got for Christmas in 2021 and as I am a beginner level tech it has helped me so much throughout my journey so far and the only complaint is with the older version the 2 drawers on it were not locked in place so they would slide out constantly which I see they added a sort of lock to it with the newer versions so I would highly recommend getting the tool set as a beginner tech the tools are good quality for the price you pay.
I am getting back into the mechanic field after doing shadetree stuff while in the Army for 13 years, when I left the Army, I went a different route, and now 9 years later I'm throwing wrenches again- you videos helped me rebuild my tool box and still going. i need to build 2 boxes, one for work( cause I can never find what I need when I need it), and one for home for all my boxes of tools
Great video! things I would’ve also liked to see as a 4 year tech: power probe, for only 100-140$, and pairing one with a multi meter is super handy to speed up diag. Would have also liked to see a pipe wrench. Would have also like to have seen small cheap kits such as plastic clips, heat shrink, o rings. Also some expendables, like dielectric grease and anti seize, especially if you’re in the rust belt. All the places I’ve been have shop scan tools, depending on that it would be worth it IMO to use that 500$ for other stuff.
Been enjoying Charles' videos for years. It's so nice to see such a brilliant mechanic share his experience and support apprentices and young people starting out in the trade. Top bloke.
Very logical choices on the types of tools. You missed a folding utility knife. The Husky ones are good. A 3 pack is $15 and could be split between boxes. Wire brush to clean things off, hand and drill type. On Amazon, I got an ABN Magnetic Swivel Spark Plug Socket Set, 5pc for $46, but DIY could just get the one they need for the cars they own. If they have shop air or compressor, then a $25 Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit might also be on the list. The DIY guy would also need a vice and maybe think about a spring compressor for struts, but I know that blows up the budget. I am looking forward to the scanner review. Dose it do a full auto scan and give you a list of errors without having to check each sub module one at a time? Can you also ask them about the cost on updates and what happens if you miss a few over time?
Tough call for spark plug sockets. Ford used 9/16 plugs for a good while, but in recent year went to a traditional size. It's not too uncommon to work on older Fords so getting a complete set of plug sockets would probably do a new guy well.
I’m starting off as a technician I wasn’t sure where I wanted my life to go but being a car enthusiast led me to your channel and I have to say I’ve made the greatest decision of my life and am having so much fun I’m glad your looking out for the new guys like myself and I honestly can’t wait start professionally 😁😁
100% agree about the Multimeter, I have a couple nice ones, yet I always grab my cheap old Craftsman one. Also totally agree with you about the Allen wrenches in those tool sets. Maybe add some sort of spline sockets. Or some other socket for rounds over fasteners. Also a pinless universal set would be a good addition.
I made the same mistake when I was a young mechanic got in the snap on truck, got in over my head. Thanks for educating all the younger dudes out there!
I'm a Heavy Machine Diesel mechanic (6 Years now); I've done the whole toolbox buying and snap on matco buying. This will also get most diesel mechanics through the door other than the impact sockets; your gonna need bigger. A tool that i've used for YEARS on heavy machinery as well as motorcycles, friends boats and on cars is a Manual Impact or a hammer driver. There is one on Amazon that is under $50 called a AKM Manual impact. Most of the screws and hex bolts that will slip and round off with the impact or ratchet wont with this and will save so much time. Another which I found on amazon is a Lexivon Keyed Torx driver set; if memory serves, i spent $25 on it and use it almost weekly. Though it is more of a specialty tool and most fields won't use them. still nice to have that one time getting into a dash panel on a older Japanese import.
Hey Charles Merry Christmas and I hope you eventually see this man. I was on the fence last year on whether or not to pursue a career change and become a mechanic full time. You put out that video last year and the bit at the end of it talking about the demand for techs in the industry really influenced me in pulling the trigger to do so. Almost a full year into the job now and I feel 1000% happier and fulfilled in life. Thank you so much for the amazing content and positive energy you put out for the Vw/Audi and car community at large 💪. Keep up the good work! Cheers!
Man I have been an emergency vehicle tech for over 10 year and I think this a great thing for new mechanics. When I started it was with a set up very similar to this. Of course over the years my tools and boxes have grown and adapted to what I have found works better or makes my life easier. But for a kid fresh out of tech school or someone that is wanting to get in as a mechanic somewhere, this is a perfect set up that will last a long time, or until they want to upgrade to the bigger and better. The only thing I would add is a set of bolt and screw extractors, maybe a small tap and die set incase they need to clean out some threads, snap ring pliers, and good scraper for scraping off old gasket materiel.
I would add a test lamp as well as the multi-meter - you'll probably grab it first for a quick go/no-go check - you can also make one yourself for a cheap-as-chips option and it would still be useful (I prefer my self-made test lamp - you can select the wattage of the bulb you use - you can decide how long the leads should be and what clips/probes to put on the end etc. Great vid and advice - thanks Charles
I'd file this in the same category as the adjustable stuff. A New tech needs a firm grasp on the multimeter before using a test light. Just because it lights up doesn't mean it's good.
Great video as always. I've always recommeded a set of protective lug nut sockets for new techs. I have multiple sets from koken for the extended length but any set generally gets the job done.
As a mechanic my self, just starting out like 4 months in, I can confirm that all these tools and the box I own un ironically. For all my other younger mechanics out there I definitely recommend this setup, it works for me and I’ll be able too use those tools once I get better replacements at my own house and save money on a box at my house
I love that this guy is helping other people to get started with tools. That's the way to get people to work and it helps us all. Hopefully, it creates a culture of cooperation and more people do the same. Pretty cool. I am trying to learn to work on my car so I can take it to the track. No one taught me or gave me anything. I'm grateful for these videos bc it is my best source of knowledge.
Rewatching the video I do have one thing to add if you buy a hand tool kit in the heavy case like that rather than spend the money on tool box organization I found it easier to just drill out the tabs that hold the top tray on and slide the trays in the drawer did this with the new Kobalt set I got for Christmas and if your a DIY'er or on a budget and if it's going to live in your toolbox anyway it allows you to spend more budget on tools
9:36 I really appreciate you making these videos. I have someone that has a small workshop that works on mowers for my landscaping business. This is helped me a lot save a lot of money. I have those exact Ryobi bits and the corresponding drillbits and they are everything that I need to work on my five riding mowers and landscaping equipment. Thank you for taking peoples input. We really appreciate the work you’re doing here that is not related to work on. This is helping a lot of people and I wish more contact was like this.
The only thing I wish I would have got early in my career is a battery jump box. Seems like you're always walking out to a vehicle just to walk back in and borrow someone else pack. Really excited to see how that scan tool works. Thats one thing in 4 years I have yet to buy, always seeing the price and just deciding to use the dealer provided one for now.
I uses that tool box for clothes in my late teens. I was and still am very much into electronics repair. Having that toolbox instead of a dresser was a lifesaver. I just used a few of the deeper drawers for clothes
I am not a mechanic. I had my mid-life crisis career change from LE to T&D machinist, mould maker, welder and I am astounded as to the overlap for the tools I see in the engineering and mechanical trades. It also allows me to think outside the box seeing what others in other trades use. (Ridgid has a lifetime service agreement which is not the same as a lifetime guarantee-- store to store they will make it difficult for you to be whole if you have a problem-- buy once, cry once) Tekton is a USA company that makes a lot of its tools in Taiwan and a growing catalog of USA made SKUs. They are great, and are worth the slight premium. Perhaps, you might have missed basic metrology tools. Vernier calipers, dial indicators and a magnetic base can be had for not a lot of money. I would add a full punch set, centre, pin punches, or even perhaps roll pin punches if that work is foreseeable. Cheers!
Thank you, Charles, for another informative video. Not only do you bring up an important subject (what tools are essential for the DIYer) , but you present it in your videos with great enthusiasm: in short, you are a good teacher. And I think it is a valuable lesson, as well, that you point out that not everything has to be top quality (e.g. Snap-on) to do most jobs; in fact, I favor your mantra that the beginner needs quantity of tools to start out, rather than quality.
For the guys that work on your own cars and no one else’s. Led light strip under the hood, with a switch and fuse connected to the battery is super nice when working on that bad boi!
I'm a home mechanic and can confirm that the huskey 290 is not the best but is a great box for at home mechanics. I bought the box back in 2022, and it has been the best investment yet
I absolutely love this and the $1500 tool set up! I showed my coworker who is a lead technician this tonight since I am in school to become a mechanic. He told me he 100% agreed that these are great and loved the idea! So now I am starting a list for myself so I know what I can get to start off my tool box ❤️
Not a tradesperson myself I’m an engineering student who works on and modifies cars as a hobby. But a good quality vernier callipers. Can use it for so many things and can prevent you from purchasing other specific tools like the the brake pad wear gauges and a tyre tread depth gauge. A must have for me personally
a professional mechanic must have their own tools and some garages give a tool purchase sign-up bonus that is more than $2500, but you may be restricted to buying expensive brands like snap-on and matco. i used to sit down with the big sears catalog when i was a kid and go from one end to the other and make a big list of everything that i wanted to buy. it was fun to dream about buying stuff even if i might never use it. the women's underwear pages were fun too...
I started working as a diesel mechanic a few weeks ago that's the box I got. Had a ding so 75 off and I love it. I have all my mechanic tools in it and I still haven't touched 2 drawers and most of them arnt even close to filling. But I wouldn't say cheap to start I would say midgrade the buy nice what you brake. Most guys don't mind letting you borrow tools. Just make sure if you borrow it you buy that tool before the following monday.
This is cool what you're doing! I've been in the diesel world for about 3 years now, Mack and Volvo Truck Engine Master Certified. I got told when I went into the automotive world that if you have to borrow something more than twice, you need to buy one.
I'm but a very inexperienced DIYer, doing mostly at home brake pad replacements, but the one time I ventured outside of that was to replace the fender well cover on my vehicle, and the thing I found invaluable in helping with that (beyond a set of sockets which you have, and a jack which I assume is dealer-provided), was a $15 Energizer-brand elastic headband headlamp. Sometimes you just need both hands and a light on the problem in a weird spot and a headlamp gets light almost exactly where you're looking, and for $15 it's a pretty reasonable price.
Thank you so much for the videos My son is in his first year of tech school ( he graduates may 2025) I have been saving $ to help him with school and build his tool box but your videos are a lot of help and Paul lending his support was fantastic Thanks again your videos are so much help 😊
Just started my apprenticeship in September im located in Scotland and and my company provides a toolbox along with some basic needed tools which it very good and im thankful for but i do need more tools so this video is helpful I do not need all of these tools for obvious reason but it was good to get and idea even tho ik what all the other techs have thanks very much man
I've been out of the industry for years, but I think buying a Cordless 1/2" Impact (Milwaukee, DeWalt) is a great idea over air. When I was a Lube tech I had both air and cordless, but the cordless was invauable when going on service calls for flat tires as well as replacing wheels in the parking lot when wheel thieves struck over the weekend!
I wanted a set of tools to throw in the beater car and I bought a craftsman set for $169 for 263 pieces. Came in a plastic case with everything in a specific spot. !/4, 3/8, and 1/2 sockets and ratchets. Lifetime warranty and has most everything you need to do basic work. You can of course expand to the more specialist tools to add later. I loved it so much I bought one for my son for Christmas too!
the carts and box are really cool, as someone fortunate enough to not spend a fortune on the snap on truck its great to have someone with experience set up a box for a new person. i remember my dad fixing our cars and he was an ase master tech, so when i said i wanted to be a mechanic too he gave me his boxes and mass collection of tool truck tools. that said i still use the cheap tools cuz even with the most expensive tool if you dont know what youre doing the tool price wont change it.
I actually got a 5 grand scholarship from Techforce Foundation back in April. I am currently an apprentice at a GMC dealership in Phoenix AZ and it is incredibly fun and your tool box videos definitely helped me save money!
I have this Husky toolbox, I bought it a few months ago and love it. Also, that light @13:47 is garbage. The battery doesn't hold a charge and the magnet in the base came unglued. Mine went into the trash after only a few uses.
That was so cool that you build these boxes and then give them to someone who needs it. I wish I would of found your channel last year, maybe I could of had a chance to win a tool box. You are right, the prices of EVERYTHING has gone up and someone just starting out trying to build out a tool box it is very hard. I just buy a little here and there when I can but more often the things I need or want sit in my cart. Thanks for sharing this video. I am glad you showed that you do not need to spend $4,000-$5,000+ when you are trying to put together a tool set for someone just starting out.
I love waching your videos and they show me a ton of new stuff I am 15 and have been shown the love for fixing what people say has been gone and not this one channel but the number of people doing everything from how to videos and tool review I am working on building my toolbox and thew family members and videos like this. they just keep me extremely interested and i just want to say thank you.
Great video. Bring a tech for 15 years I Wish I could go back start off like that. You get caught up when everyone else has snap on tool boxes and you end up with a tool box that cost more then the truck you drive to work. lol. Great advice for starting off in a trade that cost so much to get into.
Crimping tool, Solder Iron, Jump starter, Aviation Spanners, Coolant pressure testing kit, drill bits, Oil funnels, Impact screwdriver (very useful for taking off brake rotor), grease gun, wire brush, battery terminal cleaning tool, car battery tester, (could be already included) magnetic spark plug sockets (rubber insert one are rubbish, magnetic ones are the best), Borescope as well as inspection mirrors.
I think what you are doing is EXTREMELY AWESOME, I wish when I started out as a mechanic over 20 years ago I would have had some guidance on tools and tool boxes better then what I got as a Young USMC Fleet Diesel Mechanic at the age of 21. Now at 45 I have a better knowledge of what I will need and what not, and as you know you can never have enough tools or there is always one you need but don't have ( Yet ), Wife hates that part of my career. I have been building motorcycles for the past 15years and have been telling our new guys/girls/techs/interns that building a toolbox is an art, and you can do it without going broke! Now I have videos to share with them and a route for them to take, cause as you know the shop is not always the easiest place to help the next gen of techs. Busy shops especially. Anyways love the vids and liked and still Subb'd!!!
I'm not an auto mechanic, I'm a maintenence guy in a manufacturing plant which provides us all the tools and toolbox we need to work on our equipment. I think it's great that you are doing videos like this both to educate people going into a trade and specifically helping someone out getting started in this trade. We need more people encouraged to go into skilled labor roles instead of getting eyeball deep in debt with a college degree for a career path that won't help you pay that loan off. On the flip side not going into serious debt buying expensive tools when more economical ones would do just fine is good too. Harbor freight works fine for some tools and some tools maybe you should think about getting from that Snapon truck. Having experienced people who can give some good advice to someone coming up is great. Keep up the good work!
To speak on your rigid and milwaukee debacle: I had rigid prior to milwaukee and I absolutely loved them. The Original batteries took and held a charge for 6 years. I loved them. The milwaukee power on the other hand for loosening fasteners is hard to beat. Battery life is also great. You just have to be careful installing.
I got a $59 battery ratchet from Husky a couple years ago, just to see if it’s something I would use. I’ve been pretty impressed by it all around. (I’m a home mechanic) great recommendations. I would maybe include, feeler gauge, compression tester, small funnel set and a coolant tester and a temperature gun. Awesome video!
My crockpot plan starting with my used $170 craftsman box (from the '93 Sears catalog lol) is ordering rusty metal drawers off eBay, sanding down, color matching, and mounting onto the current one. Better alternative to spending thousands on a bigger one, for the time being
I just started about a year ago as a Isuzu truck diesel mechanic apprentice and just stuck with a mechpro basic box but I keep braking tools especially screwdrivers so I've now just get snap on tools because no one else has them and can't try to steal it without me noticing and the tools I now have gotten form snap on has made my job 100x Easier and the way I see it if I'm in this industry for 40 years get the good stuff now rather than build 2-4 boxes of different brand tools and spend just as much and a good snap on tool set but don't get yourself in debt just use your workshops trade account to build it up the best way too go in my opinion
So I’m a older tech and I kind of agree with your assessment of the multi meter. In today’s auto’s it’s almost obsolete. But if I was to replace mine with something else. The power probe 3 would be the replacement tool. Saves so much time and time is money.
I used to be a workshop tech and now I do roadside breakdown so I know a thing or 2 about keeping tool count low and making things work, things I’d add to this are a wire brush for wheel hubs etc, a gasket scraper a small punch set. Drill bits and extractors can be borrowed from other techs as they’re not an everyday item but when I was an apprentice I did lots of servicing, oil pans and water pumps needing scrapers and the punch set is pretty essential if you ask me
I’m 17 and I take all the classes at my local trade school to get ase certified for automotive and my mom and dad got me that 290 husky set and man I’ve been using it so much and I absolutely love it and highly recommend it to other people starting out and I love the video❤
I have been lucky in my career, married into a mechanic family and learned how to do things the right way. (And the wrong way so I know what is right lol) Left my office position for a mechanic position, never been happier and j got all the tools second hand, but I'm finally going to upgrade to a US General box from harbor freight, with the work hutch, I just fell in love with it
I think what your doing is amazing and as I have been a diesel tech for the better part of 10+ years now, I try to help guide new techs towards what will help them get started tool wise seeing from what I have needed more so than anything else and what also wont break the bank when they are on a budget (they dont always listen but, thats whole other issue). I do have an older husky socket set like the one you showed that I have beat the crap out of by using them on impacts and what not with no complaints about chipping chrome or cracked sockets so IMO it is a great starter set. Also one thing that might be a great addition to these starter sets would be some 1/2" deep impact sockets. Been using a set of Grey Pneumatic sockets that have never failed where I have seen some of the tool truck brands crack and they are not super expensive for someone starting out (still use them everyday). Keep up the great content.
Omg exhaust hanger pliers are so good. Ive spent so long with freakin wd40 and a pry bar on hangers🤦🏻♂️. Got a 20$ plier hangers from amazon and they were good on small ones but not for diesel trucks. Then got a nice pair and 😍😍
That exact same 1/2" Pittsburgh Pro breaker bar is the single best tool purchase I've ever made, and for just $8 with a coupon. 13 years and four beater cars later, it has never been dethroned as my favorite tool, not even when I finally got my ugga-dugga gun.
Thank you guys for all the great ideas on this video! I hope it helps you buy tools SMART!!! What else do we need in the collection? Also here is the full list of tools from this video ~ bit.ly/4fp4co2
Flip socket set or 1/2 drive deep impact socket in 19, 21, & 22mm for wheels off/wheels on. I also think the set needs more combination wrenches. The big Husky set skips 13, 14, 16, 17, & 19 mm wrenches. Some of those are needed for drain plugs. Great effort at making the set!!! Merry Christmas!!!
@@Fedwrench Great suggestions! MERRY CHRISTMAN
For $67 tractor supply has the 87 piece gear wrench torx and Allen master set I bought a few sets for people I know who work on German junk.
For just $30 they have a 40 piece set of gearwrench torx and allen bits still a fine set .
@@HumbleMechanic check out the hyper tough pry bars at Walmart they are made by Wilde tools in the US. And get yourself a Ford truck so you can tow around those broken German cars.
A 18.5/ 19.5 millimeter lugnut socket for Ford/Chrysler/GM lug nuts that swell up from rust (even outside the rustbelt).
Replace the Harbor Freight die grinder with a Husky (it’s not much more $, and is much, much more durable, i used to go through 4 HF in a year, Husky hasn’t broken in 3 years).
A 1/4 torque wrench, newer engines use really low torque specs and a 3/8 inch doesn’t go that low.
A “whip” type swivel for the impact gun instead of the 90° swivels you showed (they choke the hell out of the airflow).
A mechanics stethoscope (the Lisle is my favorite because I can swap the probe end with a 3 foot long tube (just a piece of pre-flared brake line), which is very handy for locating exhaust leaks.)
An extension cord WITH YOUR NAME ON IT! (Never to be loaned to another technician under any circumstances! If you loan your extension cord, it immediately becomes “our extension cord, comrade.”)
Air tool oil to keep all the air tools in top condition internally.
As a young man who doesn't have a dad or guidance this Really helps point me in the right direction.
Thank you for your time & Knowledge Humble Mechanic. Keep it up
I’m so sorry you don’t have a dad around! I’m happy I can help ya
YOU keep it up, Damien 👊🏻
If it makes you feel any better, I didn’t have a mom or a dad, and I’m a master tech now ( no master cert) just paper anyways.. good luck out there.
I remember when i first started wrenching at a motorcycle dealership i walked in with one small briefcase looking tool set and 1 breaker bar. Now 3 years later I have a good tool box with about x5 the tools i started with and no snap on debt LOL
Bought 200 dollars worth of tools and tool box brand new and worked at a motorcycle dealership for years and did very well. I also worked at a car dealership from the same toolbox for years. Point is you definitely don't need expensive stuff to pursue your career. Work on your craft and talent, don't worry about expensive tools.
I currently get 50% off snap on tools because of what I’m studying in college not one of my tools are snap on for the price of one ratchet I can get a decent brand full socket set that will work for many years
@@chefbgordon8892 exactly, I have had cheap harbor freight ratchets and sockets for years, I did a full engine rebuild, manual swap and suspension work with them. All of them are still working
$200 would be tough in todays money but I 100% agree with your point. It is wayyyy too easy to get caught up with collecting tools and the toxic culture propping up the tool trucks.
Ya you can barely get wrench sets for that now everything is ridiculous even off brand crap
Well said.
A couple really good tips I found in buying tools:
- Japanese tools from Koken, Engineer, Nepros, Vessel, etc are as good and often times even better than their snap on equivalents and priced fairly. Typically a Japanese tool is a third to a tenth of the price of its Snap On equivalent. Warranty claims can be hit or miss, but Koken does have a facility in Massachusetts and they handle replacements. That said, I haven't needed any replacements for any of my Japanese tools.
- Gearwrench punches way above their price range in terms of quality. Their ratcheting tools are top notch and Home Depot will typically replace the tool under lifetime warranty even if you didn't buy it from them.
- Pawn shops are full of old American made tools and they'll typically negotiate way below their listed prices since they take in such a high volume of old tools. I put together an old Craftsman socket set and paid 5 bucks for a 12 socket set that I use almost daily.
Japanese tools are so under rated and compared to Snap On are as good if not better and so much cheaper.
I'm glad there's more people that appreciate Japanese products! Such a great culture and I'd rather buy Japanese then this rebranded Chinese steel SHIT coming from here in "America" and IM AMERICAN!
doing the lords work
Leave it to the Germans.
And let's not forget Tsunoda!
The only thing I would recommend adding is a gasket scrapper and a punch and chiesel set.
$32 really decent scraper set new handle design gearwrench comfort grip..
Flathead screw driver covers all that.
I hate finding videos I actually want to watch. I'm too lazy to pay attention
Really good call. And budget ones are reliable. We'll said dude
That's what my first boss told me to make sure I got, a good scraper, and a good punch set, definitely helps in alot of different scenarios, pry bars to
I lost all my tools in a house fire 2-18-2022. I will say that it’s no fun buying all the tool’s again. Remembering when I first bought them and how excited I was doesn’t happen twice. It warms my heart to see someone who is helping other out. Sure it’s not the same, but it is in many ways. I know whoever ends up with this will definitely be stoked! Thanks for helping out the future, and keep up the great work. New subscriber here and love the channel
Sorry man that sucks
Dayyum man that sucks I hope you bounce back
*adds extinguisher to cart*
I had the same experience. I had so much stuff. I just replace them as needed and eventually I'll have way too many tools again, lol.
I'm a DIYer and am still learning. Since I didn't really have someone to ask how to do things, I tended to break stuff... like bolts, or round off nuts trying to get them off. Maybe this isn't an issue for young technician but I would think the set would need a set of extractors. Also, I have a small propane torch I use all the time. Again, maybe shops provide real torches so it's not needed but I certainly benefited a lot once I got it. I actually wish I had seen something like this video 5 years ago when I started my adventures.
Agreed 100%. I’m a new-ish dealership tech, and even though I think that extractors (and drill bits for that matter) can be very dangerous in inexperienced hands, they are necessary at times. Gotta be able to make holes, gotta be able to remove the bolts that “the last guy” messed up.
I just DIY but I have a whole drawer (or maybe two) full of extractors, bolt outs, drill bits, etc. Once a car reaches a certain age in the rust belt, I'm almost reaching for extractors or bolt outs more than regular sockets.
what might be good advice for you is that you should hit stuff with a hammer. I work on semi's and in 99% of the cases where i can't get a bolt loose, i just smack it with my hammer hard 5-10 times and it'll come out no problem. Way quicker than heating stuff up and you won't be getting burnt while trying to get that bolt out
@@joshkiej6601 depending on what you're morning on that may or may mot work, especially if it has been heat cycled a million and one times
@@kebrownnov2993 i'm the go to guy in our shop to get bolts loose, and in over 90% of cases it will work. Sometimes you do have to apply heat/freeze it to get it loose though
I've worked as a mechanic for close to 10 years. Great video! A couple things I'd recommend for newer technicians is to look at used tools when starting out to save money. Something I think that is very important is using 6 point sockets. I work in an area where rust is prone and 12 point sockets/ wrenches can easily round fasteners.
Whole heartedly agree. I have scoured FB marketplace for tools and have found some (U.S. made) hand tools that were cheaper than the new imported equivalents; and all in very good condition. Estate sales is another source that comes to mind.
This is so cool, we have just hired a second apprentice and although we’ve already begun assembling a tool kit, this video will be a great reference. I’ve been eyeing these boxes every time I walk through Home Depot. Thanks for this Charles!
Thanks Scott! I really appreciate all the work you do for the industry
The Husky box sets are God awful, I had to help a friend pull an engine at a u pull. The ratchets are awful the sockets are loose for $100 more the gearwrench sets are miles ahead even the $100 set from hart at Walmart is better.
For a beginner I'd buy straight metric shorts and deeps from tekton, Milwaukee or HF
Milwaukee has a set of impacts on Christmas special for 99 at HD plus they are thinner walled like snapon so you can get into tight wells and against frames
Full set of combo wrenches 8-at least 24 Milwaukee has a nice set no skips but HF also has some decent sets the Husky are too thick for some spots.
Then $67 buys you the 84 pc gearwrench torx, e torx and allen set at tractor supply.
The pry bars at Walmart under hyper tough are usa made Wilde tools
At HD they have an adjustable pry bar made by crescent that works great on cv axles
But the bulk of what carl talks about in the video is good stuff
@@redneck4528’ve had the exact same husky set for over 7 years working on cars and 4 years working on Audi specifically and never had a problem with them. Never once needed any other brand including snap on or the likes.
@@jonathonlacey3833 maybe they changed, the wobble in the ratchets and looseness in the sockets in this years set was atrocious. The Husky sets I've used before were Stanley level quality which is ok.
Something changed.
@@jonathonlacey3833 what do you mean? The 20k snap on toolboxes fix things for you; they aren't just roll boxes that store tools...
Thanks Charles, I’m only 15 years old but have started wrenching on cars. I’m a little underage of course but I do most of it at home. Cars and off-roading. I have been taking you videos into recommendation. Building my setup at home next to my mothers. Keep up the great work.
No way me to man!
Next toy your Mom?
WoW, my Mom a gear head also. I'm 44 years old. I love going to car shows with her. She looks under the hood and starts talking. The Men standing around, stare at her as if she sone Goddes hahahaha.
God Bless You Youngin, enjoy the time and memories with your Mom. We all only have one.
@@cuinican1980 This comment kinda creeped me out ngl, like how do you make a joke like that to a 15 year old lmfao, like what? i cannot be the only one that finds that a little bit fucked up.
I’m an electrician, this is a good set for a young mechanic. It’s good to see some of the seniors helping out the younger guys. I have used the General roller box before and loved it. I’m a DIY mechanic for my own vehicles and like some of the things your showing especially the scan tool I have never used anything but a basic OBDII scan tool.
Nowadays you need to be able to do special functions and program when needed. Nowadays you need to be able to read TPMS sensors, 02 sensors, get Data for coolant temp, what the thermostat is doing, MAF, EGR, there's a lot more to it besides just reading and clearing codes, that's what separates a mechanic and a technician.
@@kebrownnov2993 yes and no. Tech at a dealer with high end scan tool couldnt diagnose an o2 sensor on my van. If he knew how to use an oscilloscope he would of found it as well.
Programming functions tho, your hands are tied.
@@Shredxcam22 obviously he needs training on his scan tool
@@kebrownnov2993 2 different dealers worked on it. One changed a cat. One said it was software. Both were wrong.
That being said , I wouldn't wish being an auto mechanic on my worst enemies. Lowest paid and worse conditions. I would never and have never worked a job that would ask me to buy my own tools for work.
Thanks Charles for doing this! Helping others is what it's about! Merry Christmas
I really want your book,but in PDF Sir, because of "field needs", where is really not comfortable and respectful to handle a book with oily hands :-( But as far as I know, I can not buy that :( And Iam from Europe, so Iam basically screwed anyway :(
Brother give glory to Him who deserves it. Jesus Christ. We help others not because it makes us or others feel good but because we honor our Father in heaven when we do this. We do good to others only because we as fellow believers in Christ are empowered to do so by His Spirit. Love you and pray for you frequently. You’ve been a tremendous blessing on me and my family! God bless you brother
You are the man Paul! We need more people like you and Charles in this business
TEACHA!!!
Awesome seeing you in the video! So cool seeing my best teacher on UA-cam! Merry Xmas and new year Danner!
From a guy on the autobody side (I won't hold poking fun at us against you 😉) thanks for all you!
Just started building my kit got hired as a diesel tech for GSE maintenance at an airport this video has really helped me out to see what I need and price points although I made a goof my first week and bought a SNAPON air impact for $650 off the truck but this video has helped me learn my lesson
We used to own 2 collision shops, I came up with the same idea a few years for new techs in training. We would front the cost and if the tech stayed with us for a certain amount of time it was theirs to keep. It ended up working out great!
The only thing I can think of to add right now is snap ring pliers. They aren't needed often, but when they are, they are great! Oh, and a spark plug gapper, and feeler gauge set.
Everything else is awesome. I'm not an apprentice, but i do tend to do a lot of work on my own vehicles, be it 2 wheels or 4. My buddy, however, has been a diesel mechanic for going on 20 years, and he has helped me out a lot. There were things I was going to suggest, like the $15 light, then you happen to mention it. It's be a great drop light, and got a ton of use when rebuilding my front end.
You are also correct about having the right tool, vs something that will work.
I had to modify a 4 pin spindle nut socket into a 2 pin because no one in town had the one I needed, and ordering it would take too long. Also, no one had the correct size socket to take of the nut for my bottom ball joint. I had to buy the biggest channellock type pliers I could to get the best grip on that nut. It was a PITA, but worked. Having the right socket would have saved alot of time.
Bro I’m 3 months into my tech career, and I walked in with 500$ worth of the very basics and I’ve already built up a 9k+ debt with tool trucks to have everything that I need and some little stuff from HF. This is awesome and is definitely a great place for someone to start their career with.
Thank you for doing this, humblemechanic. As an instructor, I appreciate a seasoned tech looking out for the next generation. We need more of this in the industry. That is an incredible start up kit that will allow a young mechanic a successful start. I hope the young person to receive this box will pay it forward in the future. I have only recently come across your channel and you have a new follower.
Thank you so much
Keep an eye out on the 308 piece craftsman set. It goes on sale at ace hardware/lowes for 199-249 and it all comes in plastic trays meant for a toolbox. The sockets come with some of the bigger sizes (up to 24mm and 22m in 3/8) its one of the best starter sets in my opinion for the pricepoint if you can snag it on sale
As a guy just starting to get into cars and going for A&P certification I can’t thank you enough for this awesome set
This is what I like to see especially in this industry. I went back to doing diesel a year ago and started a new box just about everything came from harbor freight and still does. I still pull and rebuild engines just fine. Thank you for what your doing and showing.
The M12 3/8 ratchet is what got me on the M12 platform. My big stuff is all Dewalt.
a tool i think is a must have for a new tech is hose pliars, the $15, 3 piece set from Harbor Freight are great, (Long Reach Hose Grip Pliers),they help out a ton, there are nicer ones on the market, but for $15 they cant be beat for a beginner. mine get used almost daily.
Thank you, Charles! We appreciate your continued support of TechForce. Jeffery, the recipient of this toolbox was thrilled about your donation.
That's a very nice beginner set and whoever ends up with it will be off to a great start. One thing I'd recommend (I'm sure everyone watching this video will have an opinion on 'just one more thing') would be the Gearwrench 3680 serpentine belt tool set. It's a great value at $60 and has applications far beyond just serp belts.
Also 100% agree on the Allen wrenches. Nearly always prefer a bit socket.
Also don't need a fancy multimeter, just something basic or even just a 12v test light at first.
The Bilitools B1B99251 looks to be the identical set for $43
Knipex "Pliers Wrench" are a mandatory addition to every aviation mechanic. Auto mechanics should use them too!
Vanpliers are also great to have.
No. They fucking sucks
I think you have fantastic ideas on tools. I have to give a nod to the M12 tools. 1) Size, they're perfect for 90% of every fastener and get in small spaces and less fatigue. 2) Electric is portable. Meaning in car. Travels in a bag. Outside work. Friends car on side of road. Air tools are going the way of the Dodo with rare exception. Necessity for smart work, not just cordless. Pry tools for trim and hose clamps, insanely useful for quality of work/not breaking things. Bits... Never enough sockets or bit adapters, universal joints, shallow etc. Same as small ratchets for spark plug nightmares. LED lights, one of the greatest improvements with magnetic mounts. 1/2" tools for serious work. And ratcheting wrenches, can't have too many. Esp Swivel head.
I can’t say this enough,this is a great video! I’m a DIY car guy and thanks to this video it made me realized what tools I have and what I didn’t have. This video encouraged me to buy Milwaukee combo kit (impact driver/drill) which I got free 50 bit kit and a free 3/8 ratchet . Definitely a game changer for me for $250 out the door
You sir are a class act. If I had you as a mentor as a 20 somethin I may have stayed in the auto tech field. I have zero regrets on the route I ended up taking but I LOVE the idea of what you are doing. KUDOS!
I had an awesome mentor too and he’s still someone I consider a friend but bad employers pushed me away from the field, I love construction though, plus I got to buy different tools and that’s always good
Great calls on the caliper and trim kits. I've used both for my independent stuff a ton and they have made me way more money than I have ever paid for them. The other nice thing about that caliper kit that rules is you can put the flat face on it and use it to press in standard pistons as well.
I would recommend adding a stethoscope, I have found them useful for pinpointing the location of various sounds.
Great video and list of tools for starting out!
Not for a beginner box.
I’m an apprentice Diesel tech, I have that husky mechanics set. And I have definitely put those sockets and ratchets through their paces. The only thing that was unfortunate was the combination wrenches, it skipped around on sizes. But other than that, that kit is pretty good for budget.
I'm a beginner level auto tech and I have an older version of the set where the drawers didn't lock in place but the set hasn't let me down besides the occasional drawer falling out.
Heya, Just my two cents but, The mechanic set that is most versatile with the price is the Craftsman 450-piece tool set, it's what I snagged for about 200 $ and I genuinely love the set. I mostly work on BMW and the kit includes Torx, 12 points, 6 points, 8 points, and even some E-Torx!!! I firmly stand by the craftsman warranty and if you're near a good lowe's they will automatically warranty the item. The organization is very good. I will say the tools aren't the best but the warranty will invariably replace them if you try and put them up against something tough. Hope this helps Charles!
That snap on comment about paying things off forever is so true. I bought a bag of beef jerky and a Snap- On hat that I’m still paying off. It’s been 3 years already.
Just started out in my first dealer tech job at 18 at a Hyundai dealer. This is so helpful not only showing what kind of tools might be useful for me to buy and build slowly. Thanks Charles. This helped so much.
When it comes to some tools like wrenches on ebay you can get snap on tools for fairly cheap, not as cheap as some other places but it still makes a huge difference
I agree. Ive bought a good amount on eBay.
Buying used tools in general will save a ton of money. People get sets as gifts then never use them or they buy a bunch of tools thinking they like to wrench then find they don't have time or it's too much trouble. I buy tools when they are on sale or when I find them used if I can. I only buy new at full price when I hit a roadblock and need a very specific tool.
Amazon is the cheap tools shopping , gear wrench sets and watch places like tractor supply around the holidays and home depot
I’ve been doing the same, I’m a boat tech 3+ years in. I bought pretty much all of my beginner tools at harbor freight and I’ve been slowly upgrading and adding over the last couple years
Just wanted to say I have an older version of the 290 piece husky toolbox that I got for Christmas in 2021 and as I am a beginner level tech it has helped me so much throughout my journey so far and the only complaint is with the older version the 2 drawers on it were not locked in place so they would slide out constantly which I see they added a sort of lock to it with the newer versions so I would highly recommend getting the tool set as a beginner tech the tools are good quality for the price you pay.
I am getting back into the mechanic field after doing shadetree stuff while in the Army for 13 years, when I left the Army, I went a different route, and now 9 years later I'm throwing wrenches again- you videos helped me rebuild my tool box and still going. i need to build 2 boxes, one for work( cause I can never find what I need when I need it), and one for home for all my boxes of tools
Great video! things I would’ve also liked to see as a 4 year tech: power probe, for only 100-140$, and pairing one with a multi meter is super handy to speed up diag. Would have also liked to see a pipe wrench. Would have also like to have seen small cheap kits such as plastic clips, heat shrink, o rings. Also some expendables, like dielectric grease and anti seize, especially if you’re in the rust belt. All the places I’ve been have shop scan tools, depending on that it would be worth it IMO to use that 500$ for other stuff.
Been enjoying Charles' videos for years. It's so nice to see such a brilliant mechanic share his experience and support apprentices and young people starting out in the trade. Top bloke.
Very logical choices on the types of tools. You missed a folding utility knife. The Husky ones are good. A 3 pack is $15 and could be split between boxes. Wire brush to clean things off, hand and drill type. On Amazon, I got an ABN Magnetic Swivel Spark Plug Socket Set, 5pc for $46, but DIY could just get the one they need for the cars they own. If they have shop air or compressor, then a $25 Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit might also be on the list. The DIY guy would also need a vice and maybe think about a spring compressor for struts, but I know that blows up the budget. I am looking forward to the scanner review. Dose it do a full auto scan and give you a list of errors without having to check each sub module one at a time? Can you also ask them about the cost on updates and what happens if you miss a few over time?
Tough call for spark plug sockets. Ford used 9/16 plugs for a good while, but in recent year went to a traditional size. It's not too uncommon to work on older Fords so getting a complete set of plug sockets would probably do a new guy well.
I’m starting off as a technician I wasn’t sure where I wanted my life to go but being a car enthusiast led me to your channel and I have to say I’ve made the greatest decision of my life and am having so much fun I’m glad your looking out for the new guys like myself and I honestly can’t wait start professionally 😁😁
100% agree about the Multimeter, I have a couple nice ones, yet I always grab my cheap old Craftsman one. Also totally agree with you about the Allen wrenches in those tool sets.
Maybe add some sort of spline sockets. Or some other socket for rounds over fasteners. Also a pinless universal set would be a good addition.
Especially the Allen wrenches in that set, they literally give you two of the same sets
As long as it is a digital one. 🤣
i personally hate allen wrenches i will grab an allen socket for my ratchet over a allen key
I made the same mistake when I was a young mechanic got in the snap on truck, got in over my head. Thanks for educating all the younger dudes out there!
I'm a Heavy Machine Diesel mechanic (6 Years now); I've done the whole toolbox buying and snap on matco buying. This will also get most diesel mechanics through the door other than the impact sockets; your gonna need bigger. A tool that i've used for YEARS on heavy machinery as well as motorcycles, friends boats and on cars is a Manual Impact or a hammer driver. There is one on Amazon that is under $50 called a AKM Manual impact. Most of the screws and hex bolts that will slip and round off with the impact or ratchet wont with this and will save so much time.
Another which I found on amazon is a Lexivon Keyed Torx driver set; if memory serves, i spent $25 on it and use it almost weekly. Though it is more of a specialty tool and most fields won't use them. still nice to have that one time getting into a dash panel on a older Japanese import.
Hey Charles Merry Christmas and I hope you eventually see this man.
I was on the fence last year on whether or not to pursue a career change and become a mechanic full time. You put out that video last year and the bit at the end of it talking about the demand for techs in the industry really influenced me in pulling the trigger to do so.
Almost a full year into the job now and I feel 1000% happier and fulfilled in life. Thank you so much for the amazing content and positive energy you put out for the Vw/Audi and car community at large 💪. Keep up the good work! Cheers!
That’s awesome man good for you!
That's awesome, Francis. 👍
Man I have been an emergency vehicle tech for over 10 year and I think this a great thing for new mechanics. When I started it was with a set up very similar to this. Of course over the years my tools and boxes have grown and adapted to what I have found works better or makes my life easier. But for a kid fresh out of tech school or someone that is wanting to get in as a mechanic somewhere, this is a perfect set up that will last a long time, or until they want to upgrade to the bigger and better. The only thing I would add is a set of bolt and screw extractors, maybe a small tap and die set incase they need to clean out some threads, snap ring pliers, and good scraper for scraping off old gasket materiel.
I would add a test lamp as well as the multi-meter - you'll probably grab it first for a quick go/no-go check - you can also make one yourself for a cheap-as-chips option and it would still be useful (I prefer my self-made test lamp - you can select the wattage of the bulb you use - you can decide how long the leads should be and what clips/probes to put on the end etc. Great vid and advice - thanks Charles
I'd file this in the same category as the adjustable stuff. A New tech needs a firm grasp on the multimeter before using a test light. Just because it lights up doesn't mean it's good.
I really wish videos like this existed 15 years ago would’ve saved me a fortune
Great video as always. I've always recommeded a set of protective lug nut sockets for new techs. I have multiple sets from koken for the extended length but any set generally gets the job done.
Yes!!! A cheaper set of nylon sleeve sockets save a lot of headache and wheels
As a mechanic my self, just starting out like 4 months in, I can confirm that all these tools and the box I own un ironically. For all my other younger mechanics out there I definitely recommend this setup, it works for me and I’ll be able too use those tools once I get better replacements at my own house and save money on a box at my house
Great video Charles! Thanks for all you’re doing for the automotive industry 👊🏻
I love that this guy is helping other people to get started with tools. That's the way to get people to work and it helps us all. Hopefully, it creates a culture of cooperation and more people do the same. Pretty cool. I am trying to learn to work on my car so I can take it to the track. No one taught me or gave me anything. I'm grateful for these videos bc it is my best source of knowledge.
Missing pop rivet set, drill bits, thread tools, brake line flare tool, propane torch, gas solder iron, heat gun, wire crimper and ends, shrink tubing set, O-ring set, spindle hammer, serpentine pulley wrench, impact (hammer) driver, battery charger with desulfating function and engine start, vacuum puller, valve spring compressor, tire plug kit, brake spring expander pliers, seger-ring pliers, grease gun, brake fluid pumper, feeler gauges, spark plug gap setter, coolant weight and battery acid reader, mechanics stethoscope, files and reamers, gasket scraper, punches, wiper arm pullers, general pullers, fuse tester.
Rewatching the video I do have one thing to add if you buy a hand tool kit in the heavy case like that rather than spend the money on tool box organization I found it easier to just drill out the tabs that hold the top tray on and slide the trays in the drawer did this with the new Kobalt set I got for Christmas and if your a DIY'er or on a budget and if it's going to live in your toolbox anyway it allows you to spend more budget on tools
Multimeters are definitely key for any kind of troubleshooting. If you can see voltage and continuity with it, you're golden.
9:36 I really appreciate you making these videos. I have someone that has a small workshop that works on mowers for my landscaping business. This is helped me a lot save a lot of money. I have those exact Ryobi bits and the corresponding drillbits and they are everything that I need to work on my five riding mowers and landscaping equipment. Thank you for taking peoples input. We really appreciate the work you’re doing here that is not related to work on. This is helping a lot of people and I wish more contact was like this.
The only thing I wish I would have got early in my career is a battery jump box. Seems like you're always walking out to a vehicle just to walk back in and borrow someone else pack. Really excited to see how that scan tool works. Thats one thing in 4 years I have yet to buy, always seeing the price and just deciding to use the dealer provided one for now.
I uses that tool box for clothes in my late teens. I was and still am very much into electronics repair. Having that toolbox instead of a dresser was a lifesaver. I just used a few of the deeper drawers for clothes
I am not a mechanic.
I had my mid-life crisis career change from LE to T&D machinist, mould maker, welder and I am astounded as to the overlap for the tools I see in the engineering and mechanical trades.
It also allows me to think outside the box seeing what others in other trades use.
(Ridgid has a lifetime service agreement which is not the same as a lifetime guarantee-- store to store they will make it difficult for you to be whole if you have a problem-- buy once, cry once)
Tekton is a USA company that makes a lot of its tools in Taiwan and a growing catalog of USA made SKUs. They are great, and are worth the slight premium.
Perhaps, you might have missed basic metrology tools. Vernier calipers, dial indicators and a magnetic base can be had for not a lot of money. I would add a full punch set, centre, pin punches, or even perhaps roll pin punches if that work is foreseeable.
Cheers!
Thank you, Charles, for another informative video. Not only do you bring up an important subject (what tools are essential for the DIYer) , but you present it in your videos with great enthusiasm: in short, you are a good teacher. And I think it is a valuable lesson, as well, that you point out that not everything has to be top quality (e.g. Snap-on) to do most jobs; in fact, I favor your mantra that the beginner needs quantity of tools to start out, rather than quality.
For the guys that work on your own cars and no one else’s. Led light strip under the hood, with a switch and fuse connected to the battery is super nice when working on that bad boi!
I'm a home mechanic and can confirm that the huskey 290 is not the best but is a great box for at home mechanics. I bought the box back in 2022, and it has been the best investment yet
I absolutely love this and the $1500 tool set up! I showed my coworker who is a lead technician this tonight since I am in school to become a mechanic. He told me he 100% agreed that these are great and loved the idea! So now I am starting a list for myself so I know what I can get to start off my tool box ❤️
Not a tradesperson myself I’m an engineering student who works on and modifies cars as a hobby. But a good quality vernier callipers. Can use it for so many things and can prevent you from purchasing other specific tools like the the brake pad wear gauges and a tyre tread depth gauge. A must have for me personally
a professional mechanic must have their own tools and some garages give a tool purchase sign-up bonus that is more than $2500, but you may be restricted to buying expensive brands like snap-on and matco.
i used to sit down with the big sears catalog when i was a kid and go from one end to the other and make a big list of everything that i wanted to buy. it was fun to dream about buying stuff even if i might never use it. the women's underwear pages were fun too...
I started working as a diesel mechanic a few weeks ago that's the box I got. Had a ding so 75 off and I love it. I have all my mechanic tools in it and I still haven't touched 2 drawers and most of them arnt even close to filling. But I wouldn't say cheap to start I would say midgrade the buy nice what you brake. Most guys don't mind letting you borrow tools. Just make sure if you borrow it you buy that tool before the following monday.
This is cool what you're doing! I've been in the diesel world for about 3 years now, Mack and Volvo Truck Engine Master Certified. I got told when I went into the automotive world that if you have to borrow something more than twice, you need to buy one.
I'm but a very inexperienced DIYer, doing mostly at home brake pad replacements, but the one time I ventured outside of that was to replace the fender well cover on my vehicle, and the thing I found invaluable in helping with that (beyond a set of sockets which you have, and a jack which I assume is dealer-provided), was a $15 Energizer-brand elastic headband headlamp. Sometimes you just need both hands and a light on the problem in a weird spot and a headlamp gets light almost exactly where you're looking, and for $15 it's a pretty reasonable price.
Thank you so much for the videos
My son is in his first year of tech school ( he graduates may 2025) I have been saving $ to help him with school and build his tool box but your videos are a lot of help and Paul lending his support was fantastic
Thanks again your videos are so much help
😊
Just started my apprenticeship in September im located in Scotland and and my company provides a toolbox along with some basic needed tools which it very good and im thankful for but i do need more tools so this video is helpful I do not need all of these tools for obvious reason but it was good to get and idea even tho ik what all the other techs have thanks very much man
I've been out of the industry for years, but I think buying a Cordless 1/2" Impact (Milwaukee, DeWalt) is a great idea over air. When I was a Lube tech I had both air and cordless, but the cordless was invauable when going on service calls for flat tires as well as replacing wheels in the parking lot when wheel thieves struck over the weekend!
I’ve always had a bag/small box but now with my new job I need an actual box and this is a really good start. Thanks!
I wanted a set of tools to throw in the beater car and I bought a craftsman set for $169 for 263 pieces. Came in a plastic case with everything in a specific spot. !/4, 3/8, and 1/2 sockets and ratchets. Lifetime warranty and has most everything you need to do basic work. You can of course expand to the more specialist tools to add later. I loved it so much I bought one for my son for Christmas too!
the carts and box are really cool, as someone fortunate enough to not spend a fortune on the snap on truck its great to have someone with experience set up a box for a new person. i remember my dad fixing our cars and he was an ase master tech, so when i said i wanted to be a mechanic too he gave me his boxes and mass collection of tool truck tools. that said i still use the cheap tools cuz even with the most expensive tool if you dont know what youre doing the tool price wont change it.
I actually got a 5 grand scholarship from Techforce Foundation back in April. I am currently an apprentice at a GMC dealership in Phoenix AZ and it is incredibly fun and your tool box videos definitely helped me save money!
That’s AWESOME
I have this Husky toolbox, I bought it a few months ago and love it. Also, that light @13:47 is garbage. The battery doesn't hold a charge and the magnet in the base came unglued. Mine went into the trash after only a few uses.
That was so cool that you build these boxes and then give them to someone who needs it. I wish I would of found your channel last year, maybe I could of had a chance to win a tool box. You are right, the prices of EVERYTHING has gone up and someone just starting out trying to build out a tool box it is very hard. I just buy a little here and there when I can but more often the things I need or want sit in my cart. Thanks for sharing this video. I am glad you showed that you do not need to spend $4,000-$5,000+ when you are trying to put together a tool set for someone just starting out.
I love waching your videos and they show me a ton of new stuff I am 15 and have been shown the love for fixing what people say has been gone and not this one channel but the number of people doing everything from how to videos and tool review I am working on building my toolbox and thew family members and videos like this. they just keep me extremely interested and i just want to say thank you.
Craftsman has this handle ratchet tool. You twist the handle and it does the job. Great tool for tight spots and was $35.
Great video. Bring a tech for 15 years I Wish I could go back start off like that. You get caught up when everyone else has snap on tool boxes and you end up with a tool box that cost more then the truck you drive to work. lol.
Great advice for starting off in a trade that cost so much to get into.
Crimping tool, Solder Iron, Jump starter, Aviation Spanners, Coolant pressure testing kit, drill bits, Oil funnels, Impact screwdriver (very useful for taking off brake rotor), grease gun, wire brush, battery terminal cleaning tool, car battery tester, (could be already included) magnetic spark plug sockets (rubber insert one are rubbish, magnetic ones are the best), Borescope as well as inspection mirrors.
I think what you are doing is EXTREMELY AWESOME, I wish when I started out as a mechanic over 20 years ago I would have had some guidance on tools and tool boxes better then what I got as a Young USMC Fleet Diesel Mechanic at the age of 21. Now at 45 I have a better knowledge of what I will need and what not, and as you know you can never have enough tools or there is always one you need but don't have ( Yet ), Wife hates that part of my career. I have been building motorcycles for the past 15years and have been telling our new guys/girls/techs/interns that building a toolbox is an art, and you can do it without going broke! Now I have videos to share with them and a route for them to take, cause as you know the shop is not always the easiest place to help the next gen of techs. Busy shops especially. Anyways love the vids and liked and still Subb'd!!!
I'm not an auto mechanic, I'm a maintenence guy in a manufacturing plant which provides us all the tools and toolbox we need to work on our equipment. I think it's great that you are doing videos like this both to educate people going into a trade and specifically helping someone out getting started in this trade. We need more people encouraged to go into skilled labor roles instead of getting eyeball deep in debt with a college degree for a career path that won't help you pay that loan off. On the flip side not going into serious debt buying expensive tools when more economical ones would do just fine is good too. Harbor freight works fine for some tools and some tools maybe you should think about getting from that Snapon truck. Having experienced people who can give some good advice to someone coming up is great. Keep up the good work!
To speak on your rigid and milwaukee debacle:
I had rigid prior to milwaukee and I absolutely loved them. The Original batteries took and held a charge for 6 years. I loved them.
The milwaukee power on the other hand for loosening fasteners is hard to beat. Battery life is also great. You just have to be careful installing.
I got a $59 battery ratchet from Husky a couple years ago, just to see if it’s something I would use. I’ve been pretty impressed by it all around. (I’m a home mechanic) great recommendations. I would maybe include, feeler gauge, compression tester, small funnel set and a coolant tester and a temperature gun. Awesome video!
The husky ratchet over the air ratchet and the Milwaukee for a newbie all day long. I have one and it’s a great starter ratchet.
Wish I could help you with shopping but you didn’t do too bad. The fact that a “dealership” is doing this is very refreshing
Gasket scraper. Blow torch basic setup. Bolt extractor set from icon.
My crockpot plan starting with my used $170 craftsman box (from the '93 Sears catalog lol) is ordering rusty metal drawers off eBay, sanding down, color matching, and mounting onto the current one. Better alternative to spending thousands on a bigger one, for the time being
I just started about a year ago as a Isuzu truck diesel mechanic apprentice and just stuck with a mechpro basic box but I keep braking tools especially screwdrivers so I've now just get snap on tools because no one else has them and can't try to steal it without me noticing and the tools I now have gotten form snap on has made my job 100x Easier and the way I see it if I'm in this industry for 40 years get the good stuff now rather than build 2-4 boxes of different brand tools and spend just as much and a good snap on tool set but don't get yourself in debt just use your workshops trade account to build it up the best way too go in my opinion
So I’m a older tech and I kind of agree with your assessment of the multi meter. In today’s auto’s it’s almost obsolete. But if I was to replace mine with something else.
The power probe 3 would be the replacement tool. Saves so much time and time is money.
I used to be a workshop tech and now I do roadside breakdown so I know a thing or 2 about keeping tool count low and making things work, things I’d add to this are a wire brush for wheel hubs etc, a gasket scraper a small punch set. Drill bits and extractors can be borrowed from other techs as they’re not an everyday item but when I was an apprentice I did lots of servicing, oil pans and water pumps needing scrapers and the punch set is pretty essential if you ask me
I’m 17 and I take all the classes at my local trade school to get ase certified for automotive and my mom and dad got me that 290 husky set and man I’ve been using it so much and I absolutely love it and highly recommend it to other people starting out and I love the video❤
That’s awesome
I have been lucky in my career, married into a mechanic family and learned how to do things the right way. (And the wrong way so I know what is right lol) Left my office position for a mechanic position, never been happier and j got all the tools second hand, but I'm finally going to upgrade to a US General box from harbor freight, with the work hutch, I just fell in love with it
I think what your doing is amazing and as I have been a diesel tech for the better part of 10+ years now, I try to help guide new techs towards what will help them get started tool wise seeing from what I have needed more so than anything else and what also wont break the bank when they are on a budget (they dont always listen but, thats whole other issue). I do have an older husky socket set like the one you showed that I have beat the crap out of by using them on impacts and what not with no complaints about chipping chrome or cracked sockets so IMO it is a great starter set. Also one thing that might be a great addition to these starter sets would be some 1/2" deep impact sockets. Been using a set of Grey Pneumatic sockets that have never failed where I have seen some of the tool truck brands crack and they are not super expensive for someone starting out (still use them everyday). Keep up the great content.
That's how I started, Craftsman 250 piece kit and the Milwaukee Drill and Impact
Omg exhaust hanger pliers are so good. Ive spent so long with freakin wd40 and a pry bar on hangers🤦🏻♂️. Got a 20$ plier hangers from amazon and they were good on small ones but not for diesel trucks.
Then got a nice pair and 😍😍
That exact same 1/2" Pittsburgh Pro breaker bar is the single best tool purchase I've ever made, and for just $8 with a coupon. 13 years and four beater cars later, it has never been dethroned as my favorite tool, not even when I finally got my ugga-dugga gun.
That’s Awesome!!!