Cisco Catalyst 9200L-24T-4G-E Switch Firmware Upgrade, Stacking and High Availability Configuration
Вставка
- Опубліковано 7 лют 2025
- In this video, we would like to show you how to upgrade cisco switch firmware, stacking, and high availability configuration.
We hope you will get some knowledge from this video.
You can check Cisco Catalyst 9200L-24T-4G-E Switch Unboxing video below link :
• Cisco C9200L-24T-4G-E ...
#cisco #switch #firmware #stacking #ha #configuration
It was a good learning!
Btw you forgot to add HA configuration.
when I connect the stacking cables and boot both devices I am no longer able to console into either device via serial.
hi when you upgrade the firmware, does it upgrade both switch or do we have to do one by one seperately
It depends on the specific model and firmware version.
For some models the firmware upgrade is performed in a unified manner across all switches in the stack, and all switches will upgrade at the same time.
For other models the firmware upgrade is performed on each switch in the stack individually, one switch at a time.
We recommended to take backup of the configuration, and have a backup plan in case of any unexpected issues during the upgrade process.
Hi .One question. How to format pendrive to upgrade with usb. Fat or Fat 32?
Use the format usbflash1:{ ext2 | ext3 | ext4 | secure} command to format the EXT file systems or the entire drive.
Is this L2? Or L3?
I need to use inter-vlan and static routing.
In my thought, there is no problem on C9200L-24T-4G-E but I am not sure.
Both Layer 2 and 3 can be used.
Network Essentials License support Layer 2.
Network Advantage License support Layer 3 feature.
@@Green-IT So, if the model name is C9200L-24T-4G-E , it functions only L2 features ?
@@미스터정-i3y Yes, its.