Nice video bro, really a good job very useful, please if I perform a maintenance for a stack, shoud I power down the whole stack? or I can power down the switches one by one. Thanks in advance
What kind of maintenance you need ?? There is only maintenance which is firmware upgrade normally we do for switches and it’s didn’t required any shutdown .
Hi Rana, first thank you for this video. I would like to know if I can do this process remotely as I don't have access to the switch physically. 2nd will the old config be overwritten when the switch back online? will I lose connectivity if I do it remotely via a jump host? I already moved the image to the flash via tftp. Could you guide me with this as I don't want to lose connectivity or the current configuration. Thank you.
Yes, absolutely you can do this process remotely within a few minutes. What you need anyone who has physical access to this device should plug in Flash Drive to the USB port on this switch. 😊 😊 😊
The configuration will not be void whether you do it via TFTP or with the USB. But it is recommended to take a backup of the configuration. you will not lose the connectivity in the case of USB or TFTP. but carefully how are do connect in the situation of a TFTP upgrade. Better advise to go with my method of upgrade (USB) to get rid of all the concerns and it is faster. 😊 😊
@@Advance_Technology_by_Rana Hi Rana, I can't go for a USB as the switch in an unreachable location. I have to connect via a jump host to reach it only.
@@The_Son_of_Oden Ok go with the Jump host however your device is supposed to be reachable via LAN and use FreeFTPd or Solarwinds TFTP server. Don't forget to take a backup of your configuration. You can copy it into Notepad as well. Good Luck 👍
I watched two of your videos; upgrade IOS on a 9300 and this video. On the 9300 video, on Step 3, you used the following commands: 'copy usbflash0: bootflash'. on this video you used the commands 'copy usbflash0: flash'. Is there no difference in function between 'bootflash' & 'flash' ?
Connect with console port and check if you are able to see romon or flash mode. if the switch itself faulty then claim RMA from Cisco but you need to have active contract with them
It is all together. I know you are thinking to keep the network running on other switches but without reload all switches Physical stack cannot be created. Yes once stack created you can do single switch reload.
Awesome video! Congratulations! I was facing several questions for an upgrade and your video answered all of them. Thank you so much!
Happy to hear this, let me know if you have any more questions!
good detailed video rana...keep up the good work
Thank you, I will
thanks for the great video :)
My pleasure! 😇😇
great video!. keep posting great content.
Thank you! Will do 😎👍😎
Great video. Well structured and presented
Thanks ☺️
great video Moha!! congratulations 🎉 and thanks for the 4k resolution!!
Thank you too !
Very useful
Enjoy 😉 it dear.
Awesome
I appreciate you checking out my work and am glad you found it helpful!
Thanks for the detailed information.
Thanks dear for this support
wonderful
Many thanks 😎😎😎
very good vid - thnx
Glad you enjoyed it ✌️😁✌️
Great, thanks!
You're welcome!
Thanks sir , super explain
Thanks for your support 👍👍
thanks for your content
My pleasure 🤩🤩
Nice video bro, really a good job very useful, please if I perform a maintenance for a stack, shoud I power down the whole stack? or I can power down the switches one by one. Thanks in advance
What kind of maintenance you need ?? There is only maintenance which is firmware upgrade normally we do for switches and it’s didn’t required any shutdown .
It is a phisical maintenance for cleaning the cases using the blowing, thanks
At the end you have to give again install remove inactive
Right?
No need again. It’s only required at the beginning to create space for new IOS. You can run it again and it will recheck any unused IOS.
Amazing boss… very very informative.. can you make a video on Stack switch configuration or if already made please share the link
Thank you 😊
You're welcome 😊
Is the same procedure for Cisco 9300 stack switch ?
@@shaileshjadhav7137
9200 / 9300 catalyst all same
Hello Hana, this upgrade work on C9500 ?
Yes it does
Thank you so much sir🙏
All the best Bro
which mode it is ? bundle or install ?
Bundle dear. upgrade process will automatically find that this is a bundle
DO you live in riyadh?
Yes dear
Hi Rana, first thank you for this video. I would like to know if I can do this process remotely as I don't have access to the switch physically. 2nd will the old config be overwritten when the switch back online? will I lose connectivity if I do it remotely via a jump host? I already moved the image to the flash via tftp. Could you guide me with this as I don't want to lose connectivity or the current configuration. Thank you.
Yes, absolutely you can do this process remotely within a few minutes. What you need anyone who has physical access to this device should plug in Flash Drive to the USB port on this switch. 😊 😊 😊
The configuration will not be void whether you do it via TFTP or with the USB. But it is recommended to take a backup of the configuration. you will not lose the connectivity in the case of USB or TFTP. but carefully how are do connect in the situation of a TFTP upgrade.
Better advise to go with my method of upgrade (USB) to get rid of all the concerns and it is faster. 😊 😊
@@Advance_Technology_by_Rana Hi Rana, I can't go for a USB as the switch in an unreachable location. I have to connect via a jump host to reach it only.
@@The_Son_of_Oden Ok go with the Jump host however your device is supposed to be reachable via LAN and use FreeFTPd or Solarwinds TFTP server. Don't forget to take a backup of your configuration. You can copy it into Notepad as well.
Good Luck
👍
I watched two of your videos; upgrade IOS on a 9300 and this video. On the 9300 video, on Step 3, you used the following commands: 'copy usbflash0: bootflash'. on this video you used the commands 'copy usbflash0: flash'. Is there no difference in function between 'bootflash' & 'flash' ?
There is no difference in both commands, except for the change of catalyst series or IOS difference.
both command install add file flash: ios image name and reload command same
You need to include the image name in the copy command.
Hi, After upgrade it will remove our old configuration or not ???
Not at all. The upgrade didn't remove your old configuration.
Hy, I can update directly Catalyst 9500 from16.9.13 to 17.9.4? Or I made several step?
You can upgrade directly to this version.
Hello Rana
I facing issue with c9300 48port switch not working. Ideal status. Can you help me out.
Connect with console port and check if you are able to see romon or flash mode. if the switch itself faulty then claim RMA from Cisco but you need to have active contract with them
one question, that package config command, do we have to put pack config file in USB? if yes then how and what is that file?
no need dear.
dear, can we reload one by one our switches in stach while upgrading? or do we need to reload all together
It is all together. I know you are thinking to keep the network running on other switches but without reload all switches Physical stack cannot be created. Yes once stack created you can do single switch reload.
flashpackage.config correction.
Thanks Buddy 👍