I had one of the more expensive Chinese pruning saws before I got the DeWalt. There's no comparison. This saw cuts like crazy, the 5 AH battery lasts longer than I expected and the quality is there. Pay the extra $, get a DeWalt and don't look back. I like the guard. It keeps the chain out of the dirt and I don't cut anything over four or five inches in diameter.
Just bought one & love it. The safety tip does what it is designed to do. That made it impossible to easily cut through a 9” diameter tree, but that’s why I own a Stihl 18” chainsaw. However, as the latter was 4,500 miles away, I bought an 8” pruning saw for the one tree I needed to remove at this home, and the DeWalt will join the Stihl on my next trip.
I use this almost every day. A quite, easy to use chainsaw- electric. After we use large saws to take down or prune we use this to remove limb sections and reduce wastes to fit in the truck. Easier to use for a quick saw rather than pull out the gas top handle model. It does a good job. Great for firewood processing also. 9/10 Rated.
I have one, got it right at release. Happy with it, it's light, fast, and been reliable. It's a single purpose saw for me, I use it to prune while chipping and being able to use it 1 handed is super valuable to me. It works well that way, feels controlled and gets the "Ys" and other crazy stuff that won't feed in the chipper down to size quickly. I actually cut some branches while they feed, certainly not something Dewalt would recommend, but that works well too. ;)
Just used this saw for pruning and loved the way it performed. The guard can easily be removed and being able to cut with the tip of the saw is a need for me when trimming. No problem with kickback but this could be a problem for some. I did not have the right bit to remove the screws for the guard, but pliers worked just fine.
I've been using my Dewalt's handheld reciprocating saw with a pruning blade to do the big branch cuttings but this would a lot easier... I think I want one of these.
That tip has another purpose. When making upwards cuts, the blade will try to push out of the cut. That tip provides a place to butt the branch against.
The box points out the tip is for the upper cut and the instructions poi t out the other two. The upper cut with this saw is not as great as it sounds. I should have showed it as that is what the box points out. Perfect for a pole saw, not needed on this saw.
I have this saw the pole saw and both chainsaws first time I used it loved it but as time went on the safety tip on that bar really hinders you!! So I bought another bar intended for the pole saw and it works on the pruning saw perfectly problem solved
I own one of these and its a little monster. Ive cut down and processed a 40 foot pine tree with it, and it comes out every week for something around the property. I have been absolutely terrible to it and it doesnt care.
I love it, but as I was working in the woods trimming up small branches, the tip came off actually! I lost the screws so today I'm using it without the tip. Review was great about the sawdust getting in there and sometimes very small branches would clog up and we'd have to stop and get the branches out. Other than that, I love it.
Just purchased today for my business, but it’s basically 100% for right handed people. That’s the only flaw for me. Thx for the video. *The complaint is because I’m ambidextrous and switch hands while working*
I thought the same thing, but once I started using it I love it, especially when you're cutting from underneath. You have something to hold it to the branch
I use this all the time. Perfect for trimming hunting spots. It will handle basically anything you would cut with a chainsaw. Zero problems so far and i left the tip gaurd on. Didnt see any benefit from taking it off
I mostly use small saws for cutting saplings off at ground level. The guard looks like it would help prevent catching a rock at the blade tip. Also if you are pruning, less chance of nicking the trunk or good branch. I have the 12" but this model intrigues me.
I don't own one of these. But I like the tool. As for where the wrench is stored, no big deal for me. I will have the guard close by. And will make my adjustments there. Usually on a bench or tailgate of my pickup.
Yeah, I have the bigger cordless Dewalt chainsaw when I need to cut larger than seven or 8 inches. In a tight space the guard helps to protect other branches that you don’t want to cut. That said this size saw would be perfect for rough wood carving and you would need to remove the tip for that.
Interesting result on chain speed. I got a number very close to yours, but not exactly the same: ~1722 feet per minute. That's actually a very small % difference, close to 1% which I think we can file under "sample variation." That's roughly 2x the speed of the M18 Hatchet but the speed difference is probably due to gearing and the torque in the M18 hatchet is probably proportionately higher. I'd love to see a head-to-head that included the M12 and M18 Hatchets and this DeWalt pruning saw! I realize they're all old news at this point so it's not likely.
Gracias amigo for your review. The comments answered my question about the tip guard. I going to carve out or cut out a gruta for my St Fracis of Assisi from a long tree stomp, This tool will help me make it possible, instead of using my 18 inch. Tiene bonito dia.
I’m intrigued by this mini chainsaw but I’d never use it enough to justify having it. I got through a good number of branches and even smaller trees (maybe 3 inches, not as thick as what WA is showing here) with my 20V reciprocating saw with a 6 TPI blade and 5Ah battery. Really surprised me how well it worked. So much so that I got a little too happy with it and cut down more than I’d planned 😅. Made a huge pile that I had taken away because it was too much to leave at the curb. When I have to prune again I’ll probably get an actual pruning blade for it and go to town with it again.
Very good review. Thank you for always being detailed. How would you compare it to the Milwaukee M12 6" pruning saw? Also have you tried the new Ryobi brushless 6" pruning saw?
Any opinions or thoughts on the oiling mechanism? Manual says to drain it after use (or it will drain itself apparently-right where you do not want it😁)
Nice review, well tested from you, thanks, i will be a nice option is you're on the dewalt platform already. I wasn't sure about the guard but like you said if you use it as a pruner like intended, it should be useful. 😉
Yes this saws purpose is perfect quick pruning instead of a sawtype dewalt reach up without being so heavy good product for a lanscaper it saves tbe arms and get rid of the loopers.
Just got one.. loved your video and now feel confident in my purchase! I have an 18 inch saw and found it too large for the branches once the tree was felled. Thank you for such a great explanation!
The guard is, as you say, nice when you think about it. I'm looking for a light small saw for shorter thinning sessions in the evenings after small kids are gone to bed. With this I can get out in the woods faster and easier. The guard looks great when thinning wells around pine saplings. I need to mount and adjust chewing guards constantly to protect them from elks. So a clearing saw is not ideal.
That might be good for the ground guy cutting branches before they throw chunks on trailer. I use to throw big chunks and hated getting smacked in the face or back of the head.
I use the saw for woodcarving. The tip allows me to hold it with both hands. (And I use all kinds of safety gear, from face shield to chaps; I am neither careless nor foolish...most of the time...)
I’ve never used one like this I can see where the guard might work good on an up cut. I plan on getting one. I cruse the streets with my saw in a pick up and pick up firewood when I see it. I this saw is going to do that job just as good and quieter. That being said I don’t think this ev truck thing is going to work out
not easily, as the screw heads are of the one-way, anti-removal variety to discourage doing exactly this. Defeatable. Easier to just replace the entire bar with DeWalt’s pole saw version.
Motor is below your hand versus above and in front your hand like with Milwaukee's M12/M18 Hatchets, giving your hand a better center of gravity. Seems like it would be more comfortable/ergonomic? I'd like to run them side by side and see if that makes any difference.
As a novice chainsaw user, I love the idea of having a guard on the tip! Also, it's removable, so for those that don't, no big deal. Just take it off. Question: does the saw only run while your finger is depressing the trigger (so it would stop as soon as you release if there is kick back or something)?
There is no brake to stop the chain exactly when the trigger is let off. If your hands are on the saw, if there was kickback, you should be safe. Anyone who is careful and does not turn on the saw while getting it into place will be safe.
Looks GREAT DeWalt always makes good stuff. What's the price though, because I've been eye balling the Milwaukee pruner & the price ($199 Bare Tool) is just 2 HIGH 4 me, plus it's only 6" How much was the DeWalt?
I don't really get the point of this tool because Dewalt already has a small 20V chainsaw that actually does more. And if I'm just going to prune then I'd use the Dewalt 20V Pruner. Oh and whether you use the 3 AH battery or a 5 AH battery, you won't get more "power" with one over the other because they're both 20 volts. A higher AH rating just means the battery will last longer between charges.
That's simply not true about the batteries. I own at least 2 dozen 20v tools and I can promise you that the bigger batteries push the tool harder. There are some tasks that can't be done with the smaller batteries. It's no secret to people who use these tools.
@@derrickthdAmp hours is about time and not power. So, while a 3 AH battery won't last as long as 5 AH battery, they're both 20 volts and supply the same power to the tool. So it won't run faster or harder.
@@Resist4not true. A higher capacity battery has more cells in parallel, which means a lower internal resistance and therefore can push more current.
@@Resist4 I'm an EE. It's pretty basic electrical theory so I'm not going to argue about it all day long. Each battery has an internal resistance, the more cells you have in parallel the less resistance you end up with and the more current you can push.
Powerful lil saw. Like that is only noisy when being used compared to an idling gas saw. Concerns me that bar is not as oily as the Dewalt pole saw. That bar is a slippery mofo and goes through 3X as much oil. If oiler fails we have the warranty for that i guess ;-).
So I'm debating between the Dewalt brand of this tool at $169 and the comparable Amazon product that takes dewalt batteries at $69. Both have brushless motors and similar designs. Do you think the dewalt price is justified with it being almost $100 more?
That's hard to say honestly without having both and comparing them side by side, I know DeWalt can run until it explodes since that's what I use, Amazon brand has a good return policy if you don't like it
I’d probably buy the m12 hatchet instead. First off it’s smaller so if I need anything bigger I’ll just use my Dewalt 20v chainsaw. Second, that safety tip could be really obnoxious.
I think the Dewalt is easier to use for normal trimming as the chain speed is faster. IF you were going to use this to its max a lot, I would choose the Milwaukee as it has more torque. In a way, they are two different tools, only because of the chain speed and torque.
Super obnoxious they put that mushroom tip on the end and didn’t make it readily removable. Shouldn’t have to get a grinder to take off an unneeded add on.
@@Turbo.M777 this is designed to reach into a tree or shrub to cut out individual branches. When you do that, you don’t want to damage other branches, or the trunk of the tree or shrub. Now, sure, you can argue that care is needed, but that slows you down. Shielding the end of the bar and chain makes a lot of sense. Also, as another person pointed out below: the shield will also act as a stop when using the top of the bar to cut a branch from below, making for a quicker, more stable cut. And, as the reviewer pointed out, looks like 2 bolts hold it on. Should take 30s to remove it if needed.
I got through a good number of branches and even smaller trees (maybe 3 inches, not as thick as what WA is showing here) with my 20V reciprocating saw with a 6 TPI blade. Really surprised me how well it worked. I’m intrigued by this mini chainsaw but I’d never use it enough to justify having it.
Hey by the way , are you going to do a review on the new dewalt chainsaw 20" bar , ive try it and i am a little desapointed by the no variable trigger and i also overheated the 15 ah prety fast.
One thing that concerns me, there is normally a grease hole at the tip of the blade, and with that guard I cannot see if there is one on this model. Therefore I do not know if we can grease the sprocket at the end of the bar without taking the whole darn thing apart. Any thoughts on this issue?
@@timothymusolff4600 my 20inch farm boss and the 18inch Oregon bar on my husky don't have this so it appears that you don't know what you're talking about.
I don't think there is a chain sprocket on the 8" bar of this saw. I think there is an 8" bar with a sprocket available if you want to change it out. I also have heard that other manufacturer's 8" bars will not fit this saw due to mounting hole alignment. Anyone know for certain?
@@WorkshopAddict Last question, I promise! Would you say a newbie is better off with fast and less torque? It sounds easier to handle and therefore safer, but I'm just guessing.
I do not think that either of these saws is dangerous to a person like you. You are asking questions. You admit to not know, therefore I have a feeling you will be very safe. Neither saw is safe to use with one hand on the saw and the other hand on the branch. Keep both hands on the saw, or the other hand very far away. If I was only using this for pruning, the Dewalt will do that faster and safer for a newbie due to the cover. If this was my camping saw, I would go Milwaukee because I can use that to do much larger tasks and make it do what I need in that moment. That means I can push it beyond what it was designed to do and cut a 12 inch log for the fire. I am unsure what to tell you other than look at your use and how far you might push the saw.
I have the craftsman version of this. The tip guard comes in handy, especially when you're trimming fruit trees and don't want cut into a healthy branch I also have the pole saw and the bar and chain fit the pruner I switched the pruner bar and chain to the pole saw because I couldn't reach the higher branches and it worked great
Seems expensive. The DeWalt 8 inch polesaw is similarly priced. You'd think it'd be a lot less if weren't paying for the pole. Also seems dumb to buy an 8 inch saw with only 6 inches of actual reach. I think I'd rather have a 6 inch bar. I heard a lot of nonsense in this video justifying that that tip guard. Milwaukee doesn't have it on their 8 inch saw. I'd probably just buy the Stihl 4 inch saw if I only needed a pruner. Smaller for pruning access, don't need tools to adjust the chain, you can add the holster and it still cost less than this thing.
I finally got it. I must say I’m very impressed. It’s lite weight and does a pretty good job
I agree, same, just got it after reviewing many models.
Bunch of youtube reviews, this is the only one with an actual demonstration. thank you!
I had one of the more expensive Chinese pruning saws before I got the DeWalt. There's no comparison. This saw cuts like crazy, the 5 AH battery lasts longer than I expected and the quality is there. Pay the extra $, get a DeWalt and don't look back. I like the guard. It keeps the chain out of the dirt and I don't cut anything over four or five inches in diameter.
Just bought one & love it. The safety tip does what it is designed to do. That made it impossible to easily cut through a 9” diameter tree, but that’s why I own a Stihl 18” chainsaw. However, as the latter was 4,500 miles away, I bought an 8” pruning saw for the one tree I needed to remove at this home, and the DeWalt will join the Stihl on my next trip.
I use this almost every day. A quite, easy to use chainsaw- electric. After we use large saws to take down or prune we use this to remove limb sections and reduce wastes to fit in the truck. Easier to use for a quick saw rather than pull out the gas top handle model. It does a good job. Great for firewood processing also. 9/10 Rated.
I have one, got it right at release. Happy with it, it's light, fast, and been reliable. It's a single purpose saw for me, I use it to prune while chipping and being able to use it 1 handed is super valuable to me. It works well that way, feels controlled and gets the "Ys" and other crazy stuff that won't feed in the chipper down to size quickly. I actually cut some branches while they feed, certainly not something Dewalt would recommend, but that works well too. ;)
Does it leak oil?
Just used this saw for pruning and loved the way it performed. The guard can easily be removed and being able to cut with the tip of the saw is a need for me when trimming. No problem with kickback but this could be a problem for some. I did not have the right bit to remove the screws for the guard, but pliers worked just fine.
I took polesaw bar and but it on the chainsaw, and it fits perfectly.
What bar do you have?
I've been using my Dewalt's handheld reciprocating saw with a pruning blade to do the big branch cuttings but this would a lot easier... I think I want one of these.
YeaI'm the same way. The pruning blade is a beast too. I just have so many tools, my wife is going to murder me😊
Did about 250 cuts last Saturday cutting up hurricane debris on an old oak. Used my 20” dewalt for the big stuff.
That tip has another purpose. When making upwards cuts, the blade will try to push out of the cut. That tip provides a place to butt the branch against.
Yeah, noted that too. Would be real useful added to the pole saw for my use of it.
Buy it and swap bars with the pole saw?
The box points out the tip is for the upper cut and the instructions poi t out the other two. The upper cut with this saw is not as great as it sounds. I should have showed it as that is what the box points out. Perfect for a pole saw, not needed on this saw.
If and when I buy this saw I will remove that guard.
I have this saw the pole saw and both chainsaws first time I used it loved it but as time went on the safety tip on that bar really hinders you!! So I bought another bar intended for the pole saw and it works on the pruning saw perfectly problem solved
Do you remember the brand of bar you bought without the safety tip ?
I own one of these and its a little monster. Ive cut down and processed a 40 foot pine tree with it, and it comes out every week for something around the property. I have been absolutely terrible to it and it doesnt care.
I love it, but as I was working in the woods trimming up small branches, the tip came off actually! I lost the screws so today I'm using it without the tip. Review was great about the sawdust getting in there and sometimes very small branches would clog up and we'd have to stop and get the branches out. Other than that, I love it.
Just purchased today for my business, but it’s basically 100% for right handed people. That’s the only flaw for me. Thx for the video.
*The complaint is because I’m ambidextrous and switch hands while working*
That tip guard will be the first thing that comes off!
I thought the same thing, but once I started using it I love it, especially when you're cutting from underneath. You have something to hold it to the branch
@@loucifer4205 nah. With the higher chain speed, it's unnecessary. Especially if you're familiar with chainsaws.
@@ADN1996it also protects from cutting branches you don't want cut
Amen! I'm only here to figure out how to take it off. Easy peasy. Gotta make some plunge cuts with it. At least it's easy to take off and put back on!
@@ADN1996 way faster up cutting with the guard. I was going to take it off, but now I up cut everything without even thinking about it.
I use my 6" and 8" "pruning" saws to cut fairly large branches and wood in my remote areas. They cut well. There is no need for that new guard.
I use this all the time. Perfect for trimming hunting spots. It will handle basically anything you would cut with a chainsaw. Zero problems so far and i left the tip gaurd on. Didnt see any benefit from taking it off
The milwaukee m18 is a beast. i got the 8.0 battery worth the extra bucks. It blast through the wood without any bogging it shits and gets.
I mostly use small saws for cutting saplings off at ground level. The guard looks like it would help prevent catching a rock at the blade tip. Also if you are pruning, less chance of nicking the trunk or good branch. I have the 12" but this model intrigues me.
I love this chain saw!!! Better yet my wife loves and uses it a lot!!! Only issue is the chips getting the chain to bind once in a while.
I don't own one of these. But I like the tool. As for where the wrench is stored, no big deal for me. I will have the guard close by. And will make my adjustments there. Usually on a bench or tailgate of my pickup.
Yeah, I have the bigger cordless Dewalt chainsaw when I need to cut larger than seven or 8 inches. In a tight space the guard helps to protect other branches that you don’t want to cut. That said this size saw would be perfect for rough wood carving and you would need to remove the tip for that.
Interesting result on chain speed. I got a number very close to yours, but not exactly the same: ~1722 feet per minute. That's actually a very small % difference, close to 1% which I think we can file under "sample variation." That's roughly 2x the speed of the M18 Hatchet but the speed difference is probably due to gearing and the torque in the M18 hatchet is probably proportionately higher. I'd love to see a head-to-head that included the M12 and M18 Hatchets and this DeWalt pruning saw! I realize they're all old news at this point so it's not likely.
Gracias amigo for your review. The comments answered my question about the tip guard. I going to carve out or cut out a gruta for my St Fracis of Assisi from a long tree stomp, This tool will help me make it possible, instead of using my 18 inch. Tiene bonito dia.
If i got one hatchet ,it will be milwaukee more power! Metal bumper spike, wrench storage on the tool, also more power againt!!
I’m intrigued by this mini chainsaw but I’d never use it enough to justify having it.
I got through a good number of branches and even smaller trees (maybe 3 inches, not as thick as what WA is showing here) with my 20V reciprocating saw with a 6 TPI blade and 5Ah battery. Really surprised me how well it worked. So much so that I got a little too happy with it and cut down more than I’d planned 😅. Made a huge pile that I had taken away because it was too much to leave at the curb.
When I have to prune again I’ll probably get an actual pruning blade for it and go to town with it again.
Curious how the Dewalt compares to the new M18 8" pruning chainsaw. Thanks.
Just showed this review to an orchardist friend. He’s off trying to source a few now, reckons it will be the bees knees😂
Very good review. Thank you for always being detailed. How would you compare it to the Milwaukee M12 6" pruning saw? Also have you tried the new Ryobi brushless 6" pruning saw?
Any opinions or thoughts on the oiling mechanism?
Manual says to drain it after use (or it will drain itself apparently-right where you do not want it😁)
Nice review, well tested from you, thanks, i will be a nice option is you're on the dewalt platform already. I wasn't sure about the guard but like you said if you use it as a pruner like intended, it should be useful. 😉
I agree with you about the guard- a good thing- just took getting used to.
Dewalt should add a reverse switch to help clear out the chips binding in the case.
Yes this saws purpose is perfect quick pruning instead of a sawtype dewalt reach up without being so heavy good product for a lanscaper it saves tbe arms and get rid of the loopers.
I need something like this in my camper, ive also been viewing Milwaukee 12v pruning saw.
Just got one.. loved your video and now feel confident in my purchase! I have an 18 inch saw and found it too large for the branches once the tree was felled. Thank you for such a great explanation!
I hope it comes out before Christmas! my dad would like this a lot!
So gonna be that guy and ask.... any comparisons to the M18?
I will, but for the average user, the dewalt will cut faster and the Milwaukee will have more torque.
A 6 amp/hr battery does not give increased power, it extends the length of running time.
Wrong, the larger capacity gives less of a voltage sag.more voltage = more power.
@@garyjones7044idk I use 2a and 4a both 20v, I can tell the difference in power whenever I use the 4a
If you don't want the nose guard you can always just buy a replacement bar without it. The 8" pole saw bar is the exact same just without the guard
Thank you dude. Getting one for sure today. Didn't know DeWalt had it. might use it to cut deer .
That is interesting. We use a Sawzall and pruning blade
The guard is, as you say, nice when you think about it. I'm looking for a light small saw for shorter thinning sessions in the evenings after small kids are gone to bed.
With this I can get out in the woods faster and easier.
The guard looks great when thinning wells around pine saplings. I need to mount and adjust chewing guards constantly to protect them from elks. So a clearing saw is not ideal.
I have one, it leaks bar oil like crazy.
Does it take regular bar oil!
Almost as big as the top handle saw honestly. I know it has been out for years, but maybe a Makita XCU06z review?
That might be good for the ground guy cutting branches before they throw chunks on trailer. I use to throw big chunks and hated getting smacked in the face or back of the head.
About time. Trial period needs to come and go so they can give us a better product.
i do a lot of pruning and yes the design is awesome. I love the guard too
This is a good tool no complaints!!!
I use the saw for woodcarving. The tip allows me to hold it with both hands. (And I use all kinds of safety gear, from face shield to chaps; I am neither careless nor foolish...most of the time...)
I can't wait to get one!!!
I’ve never used one like this I can see where the guard might work good on an up cut. I plan on getting one. I cruse the streets with my saw in a pick up and pick up firewood when I see it. I this saw is going to do that job just as good and quieter. That being said I don’t think this ev truck thing is going to work out
Can you remove the front blade guard and still use?
Yes
not easily, as the screw heads are of the one-way, anti-removal variety to discourage doing exactly this. Defeatable. Easier to just replace the entire bar with DeWalt’s pole saw version.
I'm going to use one when I'm doing some smaller tree work, better than a bowsaw lol. When will they be available in the UK,?
Wonder if it would block less without that tip guard on.
Does oil leak out like on the chain saw?
Stuck between this and the pruners,,,leaning towards the chain….
One is for small branches and the other ID for larger. What are you cutting
Motor is below your hand versus above and in front your hand like with Milwaukee's M12/M18 Hatchets, giving your hand a better center of gravity. Seems like it would be more comfortable/ergonomic? I'd like to run them side by side and see if that makes any difference.
As a novice chainsaw user, I love the idea of having a guard on the tip! Also, it's removable, so for those that don't, no big deal. Just take it off. Question: does the saw only run while your finger is depressing the trigger (so it would stop as soon as you release if there is kick back or something)?
There is no brake to stop the chain exactly when the trigger is let off. If your hands are on the saw, if there was kickback, you should be safe. Anyone who is careful and does not turn on the saw while getting it into place will be safe.
@@WorkshopAddictThank you!
I bought one of these chainsaw and I feel that it is not oiling enough. I used the chainsaw 2x and never added bar oil, is this normal?
That might be right. I don't fill mine often, but you can see that the chain it getting oiled. Chains lacking oil get hot and tight.
Seems nice if you want a pruning saw.
How do you change out the chain if you need a new one with that guard on the end? Do you have to get a whole new bar, chain, and guard piece?
The guard is two pieces that leave enough room for the chain to come off between it.
I don't hate the guard considering it's intended use but I do wish it was removable without having to get creative
Buy the 20 volt 12 inch version, no guard...
I want to remove the guard in order to use the saw for carving a small bear. What do you think? Thanks
That's a good idea, I had read that other people use it for that exact thing
Looks like a great Pruning Chainsaw just what I want. Pity they DO NOT SELL IT in the UK, so why advertise it in the UK.
It’s on eBay bud.
Looks GREAT DeWalt always makes good stuff. What's the price though, because I've been eye balling the Milwaukee pruner & the price ($199 Bare Tool) is just 2 HIGH 4 me, plus it's only 6" How much was the DeWalt?
There is an 8 inch m18 version that he tested but its $279 baretool. Seems to be a lot better tho with less issues.
$179 for the bare tool, $229 with the slim 3Ah battery kit
I just bought one, but it seems like it leaks oil around the fill.
If you care close to the store you bought it from, return it and get a new one. Worse case, make a gasket for the cap.
Does it have a oil chamber
I don't really get the point of this tool because Dewalt already has a small 20V chainsaw that actually does more. And if I'm just going to prune then I'd use the Dewalt 20V Pruner.
Oh and whether you use the 3 AH battery or a 5 AH battery, you won't get more "power" with one over the other because they're both 20 volts. A higher AH rating just means the battery will last longer between charges.
That's simply not true about the batteries. I own at least 2 dozen 20v tools and I can promise you that the bigger batteries push the tool harder. There are some tasks that can't be done with the smaller batteries. It's no secret to people who use these tools.
@@derrickthdAmp hours is about time and not power. So, while a 3 AH battery won't last as long as 5 AH battery, they're both 20 volts and supply the same power to the tool. So it won't run faster or harder.
@@Resist4not true. A higher capacity battery has more cells in parallel, which means a lower internal resistance and therefore can push more current.
@@pouetance again not true. Batteries in parallel do not push more power, they just last longer.
@@Resist4 I'm an EE. It's pretty basic electrical theory so I'm not going to argue about it all day long. Each battery has an internal resistance, the more cells you have in parallel the less resistance you end up with and the more current you can push.
Powerful lil saw. Like that is only noisy when being used compared to an idling gas saw. Concerns me that bar is not as oily as the Dewalt pole saw. That bar is a slippery mofo and goes through 3X as much oil. If oiler fails we have the warranty for that i guess ;-).
How does the oil last compared to the 3ah or 6ah battery?
Oil capacity is about 9Ah. So three 3Ah chargers or one and a half 6Ah. That is at 60 degrees. It may flow faster when warmer.
So I'm debating between the Dewalt brand of this tool at $169 and the comparable Amazon product that takes dewalt batteries at $69. Both have brushless motors and similar designs. Do you think the dewalt price is justified with it being almost $100 more?
That's hard to say honestly without having both and comparing them side by side, I know DeWalt can run until it explodes since that's what I use, Amazon brand has a good return policy if you don't like it
should the model # be DCCS623B ?
Yes, thank you.
I’d probably buy the m12 hatchet instead. First off it’s smaller so if I need anything bigger I’ll just use my Dewalt 20v chainsaw.
Second, that safety tip could be really obnoxious.
buy the M18 8inch Milwaukee its 3inche longer and not very much more heavy but different animal youll love it
@miguelmorin4254 If you're gonna go m18, this is more compact and a faster cutter and more comfortable in hand it's a better design
I just bought this tool and did not know that there was a reservoir for oil? help please :)
Only use bar and chain oil. Do not use motor oil. How can I help?
@@WorkshopAddict Ok thanks! really appreciate it.
Try a flexvolt it helps a lil
Do they make a case for this tool?
I have not found one.
where can i buy it?
Which do you prefer this DeWalt or the Milwaukee you previously tested?
I think the Dewalt is easier to use for normal trimming as the chain speed is faster. IF you were going to use this to its max a lot, I would choose the Milwaukee as it has more torque. In a way, they are two different tools, only because of the chain speed and torque.
I am only sorry that in my country it is not for sale and neither is it around
Definitely looks faster cutting than the m18
Super obnoxious they put that mushroom tip on the end and didn’t make it readily removable. Shouldn’t have to get a grinder to take off an unneeded add on.
It comes off easier than you think. 👊
It’s a pruning saw. So buy a normal small saw if that’s what you want?
@@default9740 what do you mean by “normal saw?” There are numerous “pruning saws” out there that don’t have that thing limiting its use.
@@Turbo.M777 this is designed to reach into a tree or shrub to cut out individual branches. When you do that, you don’t want to damage other branches, or the trunk of the tree or shrub. Now, sure, you can argue that care is needed, but that slows you down. Shielding the end of the bar and chain makes a lot of sense.
Also, as another person pointed out below: the shield will also act as a stop when using the top of the bar to cut a branch from below, making for a quicker, more stable cut.
And, as the reviewer pointed out, looks like 2 bolts hold it on. Should take 30s to remove it if needed.
I got through a good number of branches and even smaller trees (maybe 3 inches, not as thick as what WA is showing here) with my 20V reciprocating saw with a 6 TPI blade. Really surprised me how well it worked. I’m intrigued by this mini chainsaw but I’d never use it enough to justify having it.
Hey by the way , are you going to do a review on the new dewalt chainsaw 20" bar , ive try it and i am a little desapointed by the no variable trigger and i also overheated the 15 ah prety fast.
Whats is the model number?
@@WorkshopAddict DCCS677Z1
@@WorkshopAddict wants to hear your thoughts on this chainsaw !
@@OUTILSCLIPSQC let me try and order one.
@@WorkshopAddict 👍👊👊
Hope it's cheaper than Milwaukee I want one
A lot cheaper. $179 vs. $279
@@thehhoff69 nice!
First thing to go is gonna be that tip guard 😂
I want it
One thing that concerns me, there is normally a grease hole at the tip of the blade, and with that guard I cannot see if there is one on this model. Therefore I do not know if we can grease the sprocket at the end of the bar without taking the whole darn thing apart.
Any thoughts on this issue?
These tiny saws don’t have that.
Yes they do!
@@timothymusolff4600 my 20inch farm boss and the 18inch Oregon bar on my husky don't have this so it appears that you don't know what you're talking about.
I don't think there is a chain sprocket on the 8" bar of this saw. I think there is an 8" bar with a sprocket available if you want to change it out. I also have heard that other manufacturer's 8" bars will not fit this saw due to mounting hole alignment. Anyone know for certain?
Any thoughts about the comparison with the Milwaukee M18 8" saw?
Dewalt is fast and less torque. Milwaukee is slower but has a lot more power. Both are great.
@@WorkshopAddict Last question, I promise! Would you say a newbie is better off with fast and less torque? It sounds easier to handle and therefore safer, but I'm just guessing.
I do not think that either of these saws is dangerous to a person like you. You are asking questions. You admit to not know, therefore I have a feeling you will be very safe. Neither saw is safe to use with one hand on the saw and the other hand on the branch. Keep both hands on the saw, or the other hand very far away.
If I was only using this for pruning, the Dewalt will do that faster and safer for a newbie due to the cover. If this was my camping saw, I would go Milwaukee because I can use that to do much larger tasks and make it do what I need in that moment. That means I can push it beyond what it was designed to do and cut a 12 inch log for the fire.
I am unsure what to tell you other than look at your use and how far you might push the saw.
@@WorkshopAddict Thank you!!
Can you put the 12" DeWalt bar on it ?
You could, but if you wanted to cut larger trees, you might run low on power.
@@WorkshopAddict it fits though?
Ya take the scabbard with ya in your back pocket!
That top handle looks like trouble. Suprised it made it through their legal dept.
I think chain guard should be removable if needed.
I show that later in the video.
If u don't like the tip buy the 12 inch one with no tip, problem solved....
Just take it off, I did and saw never knew it.
Why isn't this yet in Europe?!!
Rules and regulations no doubt ...😮
If the Dewalt engineers are watching this, put a belt hanger on it like you do with your other cordless drills, etc…
Working on a d ring
That tip has another purpose, it can clip onto your purse
Lose the tip guard. Junk n in the way. For noobs.
I have the craftsman version of this. The tip guard comes in handy, especially when you're trimming fruit trees and don't want cut into a healthy branch I also have the pole saw and the bar and chain fit the pruner I switched the pruner bar and chain to the pole saw because I couldn't reach the higher branches and it worked great
Wish Makita would release a form factor like this, and in XGT. Their 10" top-handle 18v saw has a laughable amount of torque and basically garbage.
"The tool is not located on the tool" said the tool... 5:14 seconds. Always wear eye protection...
Am I the only one that saw the black bear walk up and take a sniff??
If you don’t like the guard just replace the bar with an 8 inch one from the pole saw
Seems expensive. The DeWalt 8 inch polesaw is similarly priced. You'd think it'd be a lot less if weren't paying for the pole. Also seems dumb to buy an 8 inch saw with only 6 inches of actual reach. I think I'd rather have a 6 inch bar. I heard a lot of nonsense in this video justifying that that tip guard. Milwaukee doesn't have it on their 8 inch saw.
I'd probably just buy the Stihl 4 inch saw if I only needed a pruner. Smaller for pruning access, don't need tools to adjust the chain, you can add the holster and it still cost less than this thing.