With all the floods in Germany, and with Stephan not posting anything in a while, I was getting worried he'd been washed away. Glad to see you are OK, and posting videos!
Agreed on the sentiment. Even if he's away from those areas, the fact people care matters. I'm Australian and we've had our fare amount of similar issues with mother nature in recent years and those sentiments do matter.
Thanks again Stefan - I really appreciate grown-up machinists like you who share your thought process during the project rather than just showing what you've done.
I used to work in a maintenance / machine shop, there were 7 of us; Pipefitters, Electricians, Welders, Painters, a bunch of multi-skilled workers, helping to keep a Victorian era Mill running at the end of last Century - then there was Old Jim, a semi-retired, soft-spoken, apprentice-trained machinist, who had joined the company from school. He spent a couple of days a week fabricating and machining replacement parts for 100+ year old Jacquard looms and I can't tell you how many hours the other 6 of us used to waste just watching him work. The finished piece wasn't always a work of art, but the process was always a joy to watch, just like your videos.
Machining is great; I would recommend it to any young men looking for a job. The more manual machines you get to use the better, even if it's harder and more dangerous, you just experience the joy of it more.
Woohoo, a new video!!!! I have only just discovered your channel and I have spent the last week binge watching all your videos. Thank you for hours of entertainment .
Stefan, please continue making these "Why I chose this approach" videos! You can't explain too much detail about what _you_ do and why _you_ do it. I learn a lot from this type of video. I worked as a Tool Designer when I started my Engineering career and spent a _lot_ of time working with our Toolmakers. Unfortunately I couldn't run the machines to make my own designs, but by watching closely and asking a _lot_ of questions *and* taking their advice when appropriate, I became a very good Tool Designer. Now that I'm retired, I have a few small manual machine tools and can use the "lessons learned" from videos like yours to improve my machining skills. I really wish that I had been able to go through a Machinist Apprenticeship program, but watching excellent Machinist-type videos is as close to that as I can get!
Some machinists like to leave certain tool marks. Stefan likes no marks at all. The art is removing all the tool marks and not making your part go out of spec. :-)
@@StefanGotteswinter Speaking of "product" look, the plastic packaging at the end of the video is a very nice touch! I really love all the detail you put into your videos and can never get enough. Thanks for the longer video, thanks for taking the time to share.
That's a really nice finish for a milled radius! I did something similar recently, but my radius had a shoulder at one end, so I locked my x-axis and just used the a-axis... at which point I learned that endmills are not flat at the cutting end and i'd machined a tapered bulged cylindrical feature. Ah well, I managed to get it to work out in the end, so file that one under "learning experiences". Great video!
Welcome back, we missed and flood wise worried about your wellbeing even though we do not know you we love your channel and your great detailed videos so very happy to see this video today nice ending grinds. Lance & Patrick.
I want to thank you for all the plethora of videos you offer to who ever is interested in learning. I especially enjoy your building of tools like the jaws for a chuck, or the offcentre chuck, and the likes. I want to ask you, though, if you could someday put up videos about things that didn't work. Like when you later found out that a particular tool was not a good idea and why. Or when you did an iteration over a tool to actually make it work or eliminate its flaws. And of course always with your superb narration and explications as to why it didn't work or what your thoughts were on the redesign... I realise that for you it wont be very exciting. So don't feel bad about dropping this whole request in the bin... Please keep up the fantastic work and effort, and thanks again.
Very thorough explanation of what you were doing. I've been Machining 40-plus years I can't add anything to your evaluation. However the photography was so good that I felt like I had to put on safety glasses. PostScript I just subscribed
Whenever I was handed a new job from my boss the first thing I did was to make photocopies* of the drawings. One set stayed clean. The other set I used for all my math, job notes, program #s** etc. *does any one say Xerox any more? **I kept all my jobs on 3.5 floppies as I would never know which machine would by open. No USB ports for flash drives on our Trak or Anilam controls. The program #s were recorded along with the drawing #. I also used to do a bit of helical gear cutting on a Barber-Coleman Series 16 gear hobber. A normal gear hobber the work and feed ratios are easily set. The work ratio is simply the # of teeth decided by the base ration of the machine. We had gears for both banjo set-ups from 22T up to around 80T. When cutting helicals the Index and Feed ratios are calculated using a constant along with an offset depending on RH or LH helix and hob. Once calculated and factored I always wrote these down. Especially the feed gears. Of course now there are online gear train calculators that will do it for you. I was also responsible for rebuilding precision spindles for 4 years. I had one of those Sony digital cameras that used floppies. Any thing out of the ordinary got photographed and the floppy stored. I had a lot of floppies
Fantastic video, Stefan! Really enjoyed the thorough approach. I definitely learn more about how to attack tricky processes when very skilled individuals share their thoughts.
Great video! When I saw the top of the part was convex I was sure the Emco was going to be in the video, but you gotta love the rotary table. Those scotchbrite Dremel you can get from China for pennies. I got 100 each of fine, medium and coarse for like 20 bucks....
It's all in details. I also have good relations with the SK30 tool holders. I didn't know about them until I purchased my Schaublin SV-51 milling machine that has this, back then exotic, spindle. Later it has proven that it is not that exotic after all. That arbor in the dividing head. I quess that it was made in the same dividing head as it was used. Probably never leaving between it was made and used. That fuzzy Scotchbrite had a habitus which made it impossible to identify the material. Self centering indeed. Thank You for Your time You have used to put this show on the road.
Glad to know You are OK and safe from nature in Germany. I was expecting the mill of the large radius to be turned on the same arbor, not longitudinal and avoid the facets. But then I know nothing about machining and You are my master.
I spoke with a gentleman who ran a large shop and he told often times engineers will specify 304 stainless because that's what they know about - he would often recommend 303 if they didn't care as it is easier to machine.
Always an absolute pleasure to watch and listen to a master at work. I have learned a ton from all your videos and really enjoyed them at the same time. Your matter of fact yet humble presentation is a pleasure to listen too.
Always love seeing your workflow Stefan, it's so very efficient, very German. Love it. I try to follow as many of your tips and tricks and good practices as I can when I'm machining.
the scotchbrite wheel is a fantastic idea, i'm going to be setting one of those up as soon as i need to finish something. my go-to for finishing bores is a 1/4" rod with a slot in one end, where sandpaper lives until it falls apart, but that's not so great for surfaces =D
Thanks for sharing your process. It's great to see an economical order of operations, (I wasted days in the workshop just 'doing' when I could have been improving the process) Great to see a fine example of approaching a fairly finicky part. Really enjoy your videos, and despite many years in a machine shop I learn a lot from them. thanks Stefan. Wayne
I have a feeling you know when you're subscribers are randomly binging your old videos. Because every time I'm on about day two or three of doing that you post a new video, hahaha! Can't wait to see what you've got in this one.
Great videos as alsways ! Scotch brite wheels are so good for finishing, i personally use a punch to make a whole lot at a time as they do get used rather quickly.
I so appreciate your work on such small parts. My work was always on much larger components. I often wonder if designers consider how much effort goes into the production of components.
HI Stefan.Could you give us a lowdown on the radius fixture please,and your thoughts on why you chose to mill the rad on instead of turn it.Did the milling leave a certain amount of faceting?Many thanks
Turning parts in the lathe that require special arbors. We had a number of repeative jobs that required such set-ups. One was chuck jaws for machines that faced, turned and cut the ring grooves in pistons*. Another was locator pins for the wrist pin end of connecting rods that could be rotated 180° so the machines could be changed over to a different rod length. The chuck jaws came in as investment castings with the final operation cutting the jaw serrations. The locators had a 1" base diameter with the locator diameter offset .125". Hardened and then ground of course. *spent 30+ years in an automotive engine facility.
That fourth piece needs to be in show room in some museum. Would gladly visit museum or how it is called and enjoy in masterpieces like this. Now wonderig if there are other people like me that like the estetic of orecisely machined part.
Thank you Stefan, so very informative and well explained. As always I do reelize how mutch more I have to practice to get even close to being a machinist.
Another great, detailed video, Stefan! Some really great insights in the setting up and finishing of these parts, and also great filming and narration. As always, thanks for your time and sharing! 👍😎
Nice work Stefan. I'm learning plenty from your body of work. I'm going to teach myself how to make a small fly fishing trout reel to hold the flyline. Since I've not had much metalworking experience it's a steep learning curve indeed. Thanks again for the details.
Stainless steel is a pretty unpredictable material at the best of times, I was machining some 316 trunnions for a Nuclear transport flask, they had a 600mm square base 200mm thick with a mushroom shaped stem on top , I roughed the mushroom shaped out and come in the following morning to find that the mushroom cap was running true but the stem was 1mm out of true, had the Engineers scratching their heads for a while, fortunately there was enough material to make good.
Stefan, Thank you for putting the extra time and effort to video, and explain in detail, your super-quality work👏 Much appreciated …. I specially liked the tip on making the little polishing mops. Regards Robert ( Sydney, Australia)
The old crappy gauge block as vise spacers is a brilliant idea Stefan. I normally just mill a piece off scrap to size if I don't have another part I can use. Off to Ebay I go before everyone else... Oh crap...Too late😁🤣
Hello Stefan, Informative video, thank you. I hope you don't mind me asking a question... You spoke about and demonstrated that there is tension in the material and showed us how to overcome it... is there a book or website where one can get information on the amount of tension we could expect to find for a given material or is it just an experience thing one has to learn. Take care. Paul,,
Hmm. Some of it is mentioned in most machinist text books and some is mentioned in metallurgy books. A lot comes from experience and tribal knowledge :D
Wahnsinn, wieder mal Stefan! Von der Qualität her könnte das locker ein sehr gutes Lehrvideo für Zerspaner und Feinmechaniker sein, die Schritte so detailiert dokumentiert und dazu die passenden Erklärungen, einfach toll anzusehen. Ich bin jetzt 10 Jahre im Zerspanungsgeschäft und war vor dem Video sehr gespannt wie du den Außenradius fräst, hier lerne ich selbst wieder dazu! Da ich viele Einzelteile fertige, auch oft "komplex" und zeitintensiv würde mich interessieren wie viel Zeit du insgesamt gebraucht hast für die vier Teile, inkl. Planung, Aufspannvorrichtungen erstellen, etc. Das sind ja schon sehr aufwendige Teile, meine Kunden denken oft das soetwas mal eben am Sonntag zwischen Frühstück und Mittag entsteht. :-) Das dem nicht so ist wissen wir Beide sehr gut. Liebe Grüße und vielen Dank für das Video!
thanks for another interesting vid Stefan, that millvice has some interesting featuures, maybe you would like to talk us through it as some point in the future?
With all the floods in Germany, and with Stephan not posting anything in a while, I was getting worried he'd been washed away. Glad to see you are OK, and posting videos!
From the pictures on his Instagram it looks like is on high ground
Stefan lives 300 Km or so away from the floods.
Agreed on the sentiment.
Even if he's away from those areas, the fact people care matters.
I'm Australian and we've had our fare amount of similar issues with mother nature in recent years and those sentiments do matter.
@@sblack48 can confirm, beautiful hill...
Really enjoyed hearing all of the, "why I chose this approach" and tips. Always some good information. Excellent work as always.
👍
Thanks again Stefan - I really appreciate grown-up machinists like you who share your thought process during the project rather than just showing what you've done.
I used to work in a maintenance / machine shop, there were 7 of us; Pipefitters, Electricians, Welders, Painters, a bunch of multi-skilled workers, helping to keep a Victorian era Mill running at the end of last Century - then there was Old Jim, a semi-retired, soft-spoken, apprentice-trained machinist, who had joined the company from school. He spent a couple of days a week fabricating and machining replacement parts for 100+ year old Jacquard looms and I can't tell you how many hours the other 6 of us used to waste just watching him work. The finished piece wasn't always a work of art, but the process was always a joy to watch, just like your videos.
Machining is great; I would recommend it to any young men looking for a job. The more manual machines you get to use the better, even if it's harder and more dangerous, you just experience the joy of it more.
So many small tips and hints that end up making a large contribution to my skill set, thank you.
👍
Very rare to see another Gerrit spelled this way, cheers mate.
Woohoo, a new video!!!! I have only just discovered your channel and I have spent the last week binge watching all your videos. Thank you for hours of entertainment .
He's the best!
Stefan, please continue making these "Why I chose this approach" videos! You can't explain too much detail about what _you_ do and why _you_ do it. I learn a lot from this type of video. I worked as a Tool Designer when I started my Engineering career and spent a _lot_ of time working with our Toolmakers. Unfortunately I couldn't run the machines to make my own designs, but by watching closely and asking a _lot_ of questions *and* taking their advice when appropriate, I became a very good Tool Designer. Now that I'm retired, I have a few small manual machine tools and can use the "lessons learned" from videos like yours to improve my machining skills. I really wish that I had been able to go through a Machinist Apprenticeship program, but watching excellent Machinist-type videos is as close to that as I can get!
Wow - looks more like expensive jewellery rather than machined parts. Beautiful work Stefan!
Appreciate the thorough explanations. And this part was deceptively complex. Nice tip on the scotch brite.
Some machinists like to leave certain tool marks. Stefan likes no marks at all. The art is removing all the tool marks and not making your part go out of spec. :-)
Yep :)
That gives more of a "product"-look, i guess.
@@StefanGotteswinter Speaking of "product" look, the plastic packaging at the end of the video is a very nice touch! I really love all the detail you put into your videos and can never get enough. Thanks for the longer video, thanks for taking the time to share.
@@StefanGotteswinter 👍
Excellent Stefan, the extra detail in explaining the process was great. thank you for taking the time to record, edit and upload.
Thank you for taking the time for the tips as well as the comprehensive steps. Never a dull moment, truly.
Excellent video production/discussion/demonstration/build/mentoring……enjoyed, tks for sharing
The poetry of mechanical engineering and workmanship. I very much like to anticipate your future steps in the process... . Stay safe!
Very nice work Stefan. enjoyed.
Good stuff Stefan!
ATB, Robin
That's a really nice finish for a milled radius! I did something similar recently, but my radius had a shoulder at one end, so I locked my x-axis and just used the a-axis... at which point I learned that endmills are not flat at the cutting end and i'd machined a tapered bulged cylindrical feature. Ah well, I managed to get it to work out in the end, so file that one under "learning experiences".
Great video!
Impressive work. Thanks for the video.
I really appreciate your letting us look over your shoulder - always something new to learn. Thanks!
Welcome back, we missed and flood wise worried about your wellbeing even though we do not know you we love your channel and your great detailed videos so very happy to see this video today nice ending grinds. Lance & Patrick.
Loved the Scotchbrite tip. Thanks for the detailed production making the part.
Thanks for showing stuff like squaring and deburring...we novices appreciate it.
Thank you! That was a great collection of tips. I love that method for cutting the crown radius. I know I'm going to use that in the future.
I want to thank you for all the plethora of videos you offer to who ever is interested in learning. I especially enjoy your building of tools like the jaws for a chuck, or the offcentre chuck, and the likes.
I want to ask you, though, if you could someday put up videos about things that didn't work. Like when you later found out that a particular tool was not a good idea and why. Or when you did an iteration over a tool to actually make it work or eliminate its flaws. And of course always with your superb narration and explications as to why it didn't work or what your thoughts were on the redesign...
I realise that for you it wont be very exciting. So don't feel bad about dropping this whole request in the bin...
Please keep up the fantastic work and effort, and thanks again.
Dammit, Stefan! Not the open pen in the Tabellenbuch again! My heart can't take it twice.
Very thorough explanation of what you were doing. I've been Machining 40-plus years I can't add anything to your evaluation. However the photography was so good that I felt like I had to put on safety glasses. PostScript I just subscribed
Whenever I was handed a new job from my boss the first thing I did was to make photocopies* of the drawings. One set stayed clean. The other set I used for all my math, job notes, program #s** etc.
*does any one say Xerox any more?
**I kept all my jobs on 3.5 floppies as I would never know which machine would by open. No USB ports for flash drives on our Trak or Anilam controls. The program #s were recorded along with the drawing #. I also used to do a bit of helical gear cutting on a Barber-Coleman Series 16 gear hobber. A normal gear hobber the work and feed ratios are easily set. The work ratio is simply the # of teeth decided by the base ration of the machine. We had gears for both banjo set-ups from 22T up to around 80T. When cutting helicals the Index and Feed ratios are calculated using a constant along with an offset depending on RH or LH helix and hob. Once calculated and factored I always wrote these down. Especially the feed gears. Of course now there are online gear train calculators that will do it for you.
I was also responsible for rebuilding precision spindles for 4 years. I had one of those Sony digital cameras that used floppies. Any thing out of the ordinary got photographed and the floppy stored. I had a lot of floppies
I love how you make the explanations so easy to understand for a non machinist. Also, your English was never bad, but it’s gotten excellent.
Master craftsmanship, ISPO dimensioning lesson and a very nice rotating fixture setup all in one!
Fantastic video, Stefan! Really enjoyed the thorough approach. I definitely learn more about how to attack tricky processes when very skilled individuals share their thoughts.
Love the Scotch-Brite pad trick 👍👍
Great video! When I saw the top of the part was convex I was sure the Emco was going to be in the video, but you gotta love the rotary table. Those scotchbrite Dremel you can get from China for pennies. I got 100 each of fine, medium and coarse for like 20 bucks....
Thanks!
I have to check ebay for those cheap scotch brite wheels.
So amazing to see all this manual excellence in such a level of detail. Always amazing to see a true master of it's craft!
It's all in details.
I also have good relations with the SK30 tool holders. I didn't know about them until I purchased my Schaublin SV-51 milling machine that has this, back then exotic, spindle. Later it has proven that it is not that exotic after all.
That arbor in the dividing head. I quess that it was made in the same dividing head as it was used. Probably never leaving between it was made and used.
That fuzzy Scotchbrite had a habitus which made it impossible to identify the material. Self centering indeed.
Thank You for Your time You have used to put this show on the road.
Glad to know You are OK and safe from nature in Germany. I was expecting the mill of the large radius to be turned on the same arbor, not longitudinal and avoid the facets. But then I know nothing about machining and You are my master.
Another master class from the maestro.
Thank you Stephan, many techniques to absorb.
4th part would make a nice keychain! Thank you for providing these videos Stefan.
Always a pleasure to what you work and think it through.
oops Made a hash out of that...... "Always a pleasure to watch you work and think it through. "
I spoke with a gentleman who ran a large shop and he told often times engineers will specify 304 stainless because that's what they know about - he would often recommend 303 if they didn't care as it is easier to machine.
Always an absolute pleasure to watch and listen to a master at work. I have learned a ton from all your videos and really enjoyed them at the same time. Your matter of fact yet humble presentation is a pleasure to listen too.
Clear and concise description. Great work
Always love seeing your workflow Stefan, it's so very efficient, very German. Love it. I try to follow as many of your tips and tricks and good practices as I can when I'm machining.
love that you seal them all individually in self made self sealed bags too. The attention to the small details makes all the difference :)
Small, precise and on the numbers. Amazing as always. Loved the scotch pad tip too!
Gday Stefan, throughly enjoyed and thank you for explaining in detail, that’s how we all learn, much appreciated, take care, Cheers
Thank you for going over the details. You are the most efficient machinist I know I learn a lot from your details.
the scotchbrite wheel is a fantastic idea, i'm going to be setting one of those up as soon as i need to finish something. my go-to for finishing bores is a 1/4" rod with a slot in one end, where sandpaper lives until it falls apart, but that's not so great for surfaces =D
Thanks Stefan for the video, as a detail minded person I always learn from you
Fantastic video, Stefan! Really enjoyed the thorough approach. 👍😊
Really nice work Stefan, and thank you. There are always a few valuable takeaways from your videos.
Truly appreciate the apprentice details. We have so much to learn from the master 👍😎👍
Great job as always. Really appreciate all the detail in these, there are so many small tips and methods hidden in them. 🤘
Thanks for sharing your process. It's great to see an economical order of operations, (I wasted days in the workshop just 'doing' when I could have been improving the process) Great to see a fine example of approaching a fairly finicky part.
Really enjoy your videos, and despite many years in a machine shop I learn a lot from them. thanks Stefan.
Wayne
I have a feeling you know when you're subscribers are randomly binging your old videos. Because every time I'm on about day two or three of doing that you post a new video, hahaha! Can't wait to see what you've got in this one.
Great videos as alsways !
Scotch brite wheels are so good for finishing, i personally use a punch to make a whole lot at a time as they do get used rather quickly.
You Sir, never fail to impress me. Bravo!
Take Care and Stay Safe.
Bob
Wonderful video. Fascinating and a great tip on the scotchbrite wheel at the end (I will put that to good use!). Thank you so much!
I so appreciate your work on such small parts. My work was always on much larger components. I often wonder if designers consider how much effort goes into the production of components.
HI Stefan.Could you give us a lowdown on the radius fixture please,and your thoughts on why you chose to mill the rad on instead of turn it.Did the milling leave a certain amount of faceting?Many thanks
Very interesting! Last week i saw a video from the Bayerischen Rundfunk about this Projekt ;-)
ah okay, mind to give some reference on how to find it? much appreciated.
@@danielscheibe8694 of course, i think thats the one: ua-cam.com/video/Ds_jcJMEPC4/v-deo.html
@@timhess3405 thanks tim! will check it out.
Turning parts in the lathe that require special arbors. We had a number of repeative jobs that required such set-ups. One was chuck jaws for machines that faced, turned and cut the ring grooves in pistons*. Another was locator pins for the wrist pin end of connecting rods that could be rotated 180° so the machines could be changed over to a different rod length. The chuck jaws came in as investment castings with the final operation cutting the jaw serrations. The locators had a 1" base diameter with the locator diameter offset .125". Hardened and then ground of course.
*spent 30+ years in an automotive engine facility.
That fourth piece needs to be in show room in some museum. Would gladly visit museum or how it is called and enjoy in masterpieces like this. Now wonderig if there are other people like me that like the estetic of orecisely machined part.
Thank you Stefan, so very informative and well explained. As always I do reelize how mutch more I have to practice to get even close to being a machinist.
One of your best videos this year Stefan. Thanks for all the insight and entertainment!
Nice video! Now back to waiting another month for the next upload 😜
Had to watch it 5 times to understand how you found center with a test indicator.... got it!
Another great, detailed video, Stefan! Some really great insights in the setting up and finishing of these parts, and also great filming and narration. As always, thanks for your time and sharing! 👍😎
Beautiful work Stefan, I always enjoy your knowledge of materials and procedures. Every video is a training session. Thanks and cheers!
Stefan thank you so much for making your videos for us I’ve learned so much from you great job
Nice work Stefan. I'm learning plenty from your body of work. I'm going to teach myself how to make a small fly fishing trout reel to hold the flyline. Since I've not had much metalworking experience it's a steep learning curve indeed. Thanks again for the details.
Stainless steel is a pretty unpredictable material at the best of times, I was machining some 316 trunnions for a Nuclear transport flask, they had a 600mm square base 200mm thick with a mushroom shaped stem on top , I roughed the mushroom shaped out and come in the following morning to find that the mushroom cap was running true but the stem was 1mm out of true, had the Engineers scratching their heads for a while, fortunately there was enough material to make good.
Yikes! That sounds like fun :D
Wow, Stefan. Very enjoyable, especially for someone who had to talk for a living.
Stefan,
Thank you for putting the extra time and effort to video, and explain in detail, your super-quality work👏
Much appreciated …. I specially liked the tip on making the little polishing mops.
Regards
Robert ( Sydney, Australia)
AWESOME JOB STEPHAN VERY INTERESTING SETUPS AND ATTENTION TO DETAIL THANKS
Fantastic craftsmanship and video, as always. You're truly a master machinist!
Great video Stefan. You always make everything look so easy, never quite the same when I go out in my shop!
Thanks again for another fine presentation.
Thanks for all the added detail Stefan, really helps
The old crappy gauge block as vise spacers is a brilliant idea Stefan. I normally just mill a piece off scrap to size if I don't have another part I can use. Off to Ebay I go before everyone else... Oh crap...Too late😁🤣
A job that requires a lot of accuracy, my friend.. have a good job mate
Some excellent ideas by Stefan. I did wonder about the approach to cutting the radii. Nice method and those 2mm screws held well 😁.
Great show, Stefan. Thanks!
Waiting for the quill change.
Nice job Stephan!
Excellent step by step explanation a even better camera work. Thank you!
Excellent precision work, and top of the line
deburring.✅💯👏🏻👏🏻👏🏻👏🏻👌🏻
Why did someone thumb down this video?
As usual, some good information presented in here, thank you.
Love this level of explanation. Thanks!
Hello Stefan,
Informative video, thank you. I hope you don't mind me asking a question... You spoke about and demonstrated that there is tension in the material and showed us how to overcome it... is there a book or website where one can get information on the amount of tension we could expect to find for a given material or is it just an experience thing one has to learn.
Take care.
Paul,,
Hmm. Some of it is mentioned in most machinist text books and some is mentioned in metallurgy books.
A lot comes from experience and tribal knowledge :D
Very, very satisfying. Thank you.
Wahnsinn, wieder mal Stefan! Von der Qualität her könnte das locker ein sehr gutes Lehrvideo für Zerspaner und Feinmechaniker sein, die Schritte so detailiert dokumentiert und dazu die passenden Erklärungen, einfach toll anzusehen. Ich bin jetzt 10 Jahre im Zerspanungsgeschäft und war vor dem Video sehr gespannt wie du den Außenradius fräst, hier lerne ich selbst wieder dazu! Da ich viele Einzelteile fertige, auch oft "komplex" und zeitintensiv würde mich interessieren wie viel Zeit du insgesamt gebraucht hast für die vier Teile, inkl. Planung, Aufspannvorrichtungen erstellen, etc. Das sind ja schon sehr aufwendige Teile, meine Kunden denken oft das soetwas mal eben am Sonntag zwischen Frühstück und Mittag entsteht. :-) Das dem nicht so ist wissen wir Beide sehr gut. Liebe Grüße und vielen Dank für das Video!
thanks for another interesting vid Stefan, that millvice has some interesting featuures, maybe you would like to talk us through it as some point in the future?
Excellent video Stefan.
Very interesting. I've watched all of your videos over the years and have picked up many good points.
Nice video and great fixture
Love this type of video, Thank You very much.
So many great tips in here!
Great video. Lots of good tips
I can see one person couldn't file their way out of a box. lol Good video @Stefan interesting pieces.
That was great, very very interesting. Well done, thanks.
Very interesting parts... Great machining, I love the approach for the radius, thanks for sharing buddy!
Hi, thanks for sharing your very intersting and informative video, always look forward to the another one.