That's not a bad little router. I bought my 1st router which was a MacAllister 1200W router and it was decent for a hobbyist like me. Now I am looking a one of the good TREND ROUTERS bcos they make really good ones on a much higher scale and the wattage is much bigger too giving more power. I would lover to see how this handled some hard white Oak or ASH. Those hard woods would really test this router. It chewed through the soft pine u used with it. I cut really well too. I'm impressed with this. I picked up some Parkside tools over the past yr. Nothing major just a few little power tools. I got the Belt sander which is grand, the Bench Drill with the belts/pulleys on top of it-the older model - This Bench Drill is a brilliant drill tbh. I would defo recommend that one to anybody looking for a good Bench Drill. I have it over a year now and use it all the time, and I also took a punt on their electric Stapler/Nail gun. It was decent with the staples but I've had issues with the nails of late. I need to have a better look at it bcos I put it in its box and eft it alone for a couple months now. These tools won't last years. They're not built to last for a decade like the Bosch, Dewalt and Makita brands. tHEY'LL LAST OUT THE WEEKEND WARRIOR THOUGH.
I really enjoyed this video, thanks a lot. You're the only person I've seen who demonstrated the circular guide. Your workshop is super clean and tidy! I've had this router in it's box but I was a bit intimidated by it because I've never used one. After watching you I'm ready to give it a go. I need to put some grooves under two doors and I was trying to work out the direction if using it sideways but then I realised it's the same just flipped 90 degrees er duh 🙄🥴😆
Ciao. Minuto 6.09 Quel pezzo è montato al contrario !!! Il diametro deve fuoriuscire, per poter copiare il profilo da fresare. Se lo metti all'interno, non serve a nulla ! :-( Antonio
Not only do they not offer any protection, gloves on rotating machines are actually extra dangerous. If your bare hand touched the machine you get away with a minor injury (e.g. a small cut on the table saw). If you wear gloves they wind up on the tool and pull your hand further into the machine causing very bad injuries like amputations.
Just bought one of these routers today. On emptying the box , amongst the tools and accessories they send with it there's an Allen key, what is it for, I can't find anything that small on the machine, and the only Allen screws I can find are possibly fixing the 2 vertical pillars to the base, but they look to be bigger. Anybody know?
Now, it's a bad router... Bonjour, afin d'avoir un débattement plus important j'ai voulu supprimer (ou remplacer) les 2 ressorts mais par rapport aux modèles d'il y a quelques mois, ils ont remplacés les 2 vis allen par des goupilles mécanindus, ce qui rends le démontage quasiment impossible (bavures lorsque l'on mets les goupilles en place). Ce qui était une "honorable" machine est de ce fait devenu une très mauvaise machine. On ne peut plus la mettre sous table et on ne peut plus mettre des ressorts plus souples ou plus courts car ceux d'origine sont trop rigides ou trop longs. Cette machine est devenue une catastrophe !
No se pueden hacer círculos más pequeños con la guía porque los mangos chocan con ella al bajar la fresa, es un grave defecto que no has explicado en tu vídeo.
je zet het verkeerd in elkaar je moet eerst de frees in de spanhuls zetten tot de onderkant , zoals jij het doet wet je nooit of de frees goed vast zit . dan het frezen je trekt hem naar je toe , zoals jij het doet krijg je geen rechte lijnen . wat te zien is toen je het kopshout liet zien . want zoals jij het doet loopt de frees weg . en bij diepte frezen doe je eerst de diepte van de breedte van de frees en nooit in een keer . en dat geld ook voor als je iets rond gaat frezen . het machine wordt totaal verkeerd gebruikt . maar wat weet ik ervan ik ben een Timmerman en werk dagelijks met dit soort apparaten . je laat niks zien of de zool stevig zit , of de machine stabiel is . nee dit is een waardeloze presentatie 👎👎👎👎👎👎👎👎👎👎👎👎👎
I just got this today, thanks for the video tutorial. Greetings from NJ USA!
That's not a bad little router. I bought my 1st router which was a MacAllister 1200W router and it was decent for a hobbyist like me. Now I am looking a one of the good TREND ROUTERS bcos they make really good ones on a much higher scale and the wattage is much bigger too giving more power. I would lover to see how this handled some hard white Oak or ASH.
Those hard woods would really test this router. It chewed through the soft pine u used with it. I cut really well too. I'm impressed with this. I picked up some Parkside tools over the past yr. Nothing major just a few little power tools. I got the Belt sander which is grand, the Bench Drill with the belts/pulleys on top of it-the older model - This Bench Drill is a brilliant drill tbh. I would defo recommend that one to anybody looking for a good Bench Drill. I have it over a year now and use it all the time, and I also took a punt on their electric Stapler/Nail gun. It was decent with the staples but I've had issues with the nails of late. I need to have a better look at it bcos I put it in its box and eft it alone for a couple months now.
These tools won't last years. They're not built to last for a decade like the Bosch, Dewalt and Makita brands.
tHEY'LL LAST OUT THE WEEKEND WARRIOR THOUGH.
that was cool !! , I really appreciate your unboxing and presentation of the capabilities of the tool😊
I bought this one this years Black Friday for a funny 30 euros... my best purchase and cheapest electric tool I have ever bought ! 👍🏼
You're going the wrong way. On the outside, go counter clockwise. On the inside, go clockwise.
I really enjoyed this video, thanks a lot. You're the only person I've seen who demonstrated the circular guide. Your workshop is super clean and tidy! I've had this router in it's box but I was a bit intimidated by it because I've never used one. After watching you I'm ready to give it a go. I need to put some grooves under two doors and I was trying to work out the direction if using it sideways but then I realised it's the same just flipped 90 degrees er duh 🙄🥴😆
Learned a lot there...very good demo!!
Nice presentation 👍
Fresadora genial calidad precio, buen vídeo compañero 💯💯👍
Great done 👍
Thanks
Спасибо за подробный обзор!!!!
Thanks 👍🏻
Ciao. Minuto 6.09 Quel pezzo è montato al contrario !!! Il diametro deve fuoriuscire, per poter copiare il profilo da fresare. Se lo metti all'interno, non serve a nulla ! :-( Antonio
Se posso dare un consiglio la fresatrice va spinta al nel senso di direzione della rotazione
Bravissimo 👍
fa tutto il contrario....anche nella risposta
At 6:08 you mounted the template guide the wrong way around!
👏👍😃
you need ear plugs, not gloves. they offer no protection against that tool and you have less feel in your hands.
Im pretty sure the gloves are for protecting his hands against splinters when whiping the wood.
Not only do they not offer any protection, gloves on rotating machines are actually extra dangerous. If your bare hand touched the machine you get away with a minor injury (e.g. a small cut on the table saw). If you wear gloves they wind up on the tool and pull your hand further into the machine causing very bad injuries like amputations.
very helpfull video, well done!
Just bought one of these routers today.
On emptying the box , amongst the tools and accessories they send with it there's an Allen key, what is it for, I can't find anything that small on the machine, and the only Allen screws I can find are possibly fixing the 2 vertical pillars to the base, but they look to be bigger.
Anybody know?
They are for the bearings on the bits.
🛠️ Nice 🛠️
Bravo 👍✨
Вчера приобрел себе, очень даже хороший аппарат и главное цена как раз для таких мелких домашних работ
6:36 typowy Janusz -dobrze że małego sobie nie obciął !
💪👍
tolles teil hol ich mir auf jedenfall
Hai mai usato una fresatrice??
No
Now, it's a bad router...
Bonjour, afin d'avoir un débattement plus important j'ai voulu supprimer (ou remplacer) les 2 ressorts mais par rapport aux modèles d'il y a quelques mois, ils ont remplacés les 2 vis allen par des goupilles mécanindus, ce qui rends le démontage quasiment impossible (bavures lorsque l'on mets les goupilles en place). Ce qui était une "honorable" machine est de ce fait devenu une très mauvaise machine. On ne peut plus la mettre sous table et on ne peut plus mettre des ressorts plus souples ou plus courts car ceux d'origine sont trop rigides ou trop longs. Cette machine est devenue une catastrophe !
No se pueden hacer círculos más pequeños con la guía porque los mangos chocan con ella al bajar la fresa, es un grave defecto que no has explicado en tu vídeo.
Also was man so sieht, sieht toll aus
desolé mais la prochaine fois sans musique SVP
may be next time without music please
I can use it without a leash, and mill as much as I want, at will to ride with you
je zet het verkeerd in elkaar je moet eerst de frees in de spanhuls zetten tot de onderkant , zoals jij het doet wet je nooit of de frees goed vast zit . dan het frezen je trekt hem naar je toe , zoals jij het doet krijg je geen rechte lijnen . wat te zien is toen je het kopshout liet zien . want zoals jij het doet loopt de frees weg . en bij diepte frezen doe je eerst de diepte van de breedte van de frees en nooit in een keer . en dat geld ook voor als je iets rond gaat frezen . het machine wordt totaal verkeerd gebruikt . maar wat weet ik ervan ik ben een Timmerman en werk dagelijks met dit soort apparaten . je laat niks zien of de zool stevig zit , of de machine stabiel is . nee dit is een waardeloze presentatie 👎👎👎👎👎👎👎👎👎👎👎👎👎
🫱🏻🫲🏿👍
Ik ben totaal geen klusser, en zelfs ik vond het er enorm amateuristisch uitzien.
Защо докосва нова и чиста оберфреза с ръкавици??????????!!!!
vidno ze amater!
Painfully slow
الفديو ممل ولا يعرف اي شئ
cyrkiel do dupy tylko duże średnice
dont speed up the video when you're showing wtf dude
👍👍👍
👍👍👍