Blasting, Painting and testing | Profile Test | Salt Test | Dust Test | Airless Spray Painting

The oil and gas plant, shipp building, fertilizer plant, off shore, and power plant are not following normal residential painting method. On the contrary, the atmospheric situations of the painting or coating , the quality of the paint, the method used to clean the surface, and the equipment required, are critical to the quality of the painting until visual quality. Here are just a few of them.
Blasting and Painting | salt contamination test | dust test | profile test
The Malix On Air (Malix Cater Channel) intends to
enhance Technology, Agriculture,Engineering,
Traveling, Food preparation and Art.
Please try to exchange of information among you
നമ്മുടെ വീട്ടിലും മറ്റും അടിക്കുന്ന പെയിൻറിംഗ് രീതിയല്ല ഓയിൽ ആൻഡ് ഗ്യാസ് പ്ലാൻറ്, ഷിപ്പ് ബിൽ ഡിംഗ്, ഫെർട്ടിലൈസർ പ്ലാൻറ്, ഓഫ് ഷോർ, പവർപ്ലാന്റ് തുടങ്ങിയ സ്ഥലങ്ങളിൽ അനുവർത്തിച്ചു പോരുന്നത്. മറിച്ച് പെയിന്റ് അല്ലെങ്കിൽ കോട്ട് ചെയ്യാനുള്ള അന്തരീക്ഷം, അടിക്കേണ്ട പ്രതലം ഒരുക്കുന്നത്, പ്രതലം ക്ലീൻ ആക്കാൻ ഉപയോഗിക്കുന്ന രീതി, അതിനാവശ്യമായ യന്ത്ര സാമഗ്രികൾ തുടങ്ങി പെയിന്റിംഗിന്റെ കാഴ്ചക്കുളള ക്വാളിറ്റി വരെ നിർണ്ണായകമാണ്. അതിൽ ചിലതു മാത്രമാണ് ഇവിടെ ഈ വീഡിയോയിലൂടെ നിങ്ങളിലേക്ക് എത്തിക്കുന്നത്.
മാലിക്സ് ഓൺ എയർ (മാലിക്സ് കാറ്റർ ചാനൽ) സാങ്കേതികവിദ്യ, കൃഷി, എഞ്ചിനീയറിംഗ്, യാത്ര, ഭക്ഷണം തയ്യാറാക്കൽ, കല എന്നിവയെ ഉദ്ദേശിച്ചുള്ള ചാനൽ ആണ്
നിങ്ങൾക്കിടയിൽ വിവരങ്ങൾ കൈമാറാൻ ശ്രമിക്കുക.
#BlastingandPainting#MEKTeast#SaltTest

[@georgemcintyre3674]

Shouldnt be handling blasted sufaces with bare hands as this will contaminate the blast

[@leslieallan392]

Suggest the use of gloves while performing all test to eliminate the possibilities of contamination from the skin....ie oils,sweat etc.

[@rolangibson7054]

Ha. ha .. you checked the anchor profile of the blasting without gloves and your hands are in direct contact with the blasted sample.

[@av.aboobacker354]

It is preferable to test salt level, then dust level and then anchor profile to avoid any inaccurate readings or avoid direct contact on test surface except test equipment. The video is very good and sharing the knowledge to others. Welldone 👍

[@sibusisogule2198]

When you inspecting a blasted surface or vessel with visual inspection before taking salt test which critical points you should check for

[@shahinneyyathoor]

Good informative
Waiting for more technical vedios

[@arunrajendran8269]

BEFORE START WORK WE NEED TO DO BLOTTER PATER TEST.

[@hasansetiyawan7131]

Its very good for me, auto subscribe . Kindly Please keep always share the others gouge .

[@MalixOnAir]

Sure

[@satyanayak8818]

Nice video to learning inspection. How much ml distilled water use during salt test?

[@mysworld4893]

1.5 ml

[@guruprasaddongre6319]

Sir, हम साल्ट कंटैमिनेशन टेस्ट q करते है

[@harikrishnakumar5181]

Pls mention the dust tape number of rubing and sequence of rubing method

[@mdrezaulkarimrezaul2268]

I want to take sandblasting and spray painting courses.
If anyone help me.

[@akashroy9422]

My favorite job sand Blasting i love you sand Blasting ❤❤

[@meconlimited3896]

Have a look at Defelsko positector 6000 with the different probes and 1 gauge body

[@rajeshqcrajesh1816]

Good Job....

[@buzigoogle9757]

Please use gloves when you touch a blasted surface❤

[@yosefmaar2433]

Great..👍

[@yazhiniyazhini5782]

Wht is the meaning of SEM? Sir ✍️

[@pambudibaguswidodo9768]

thank you, nice video

[@SarojKumar-qv1pt]

Very very nice 👍 thanks

[@wiwitajipamungkas5274]

How to read testex replica tape?

[@sconstruction7649]

Blasting machine Kaha milega

[@smashhitz6653]

very good

[@ajm3827]

Why deducting 50microns?

[@MalixOnAir]

Thickness of paper

[@marcinlisiak700]

I'm blasting at least two years. But I'm sending this first time in my life. What for is this test? It's surface test to check good abrasive use to blasting? Or test to check blasting operator? Thanks for answer.
P.s Sorry my English

[@MalixOnAir]

Dear Marcin
1st test for dust remaining in surface (tape test) if any dust, there are chance of adhesion failure and corrosion under paint filim.
2nd test for profile.
3rd test is salt contamination test (for checking any salt)
These test not for blaster
Please subscribe my channel

[@marcinlisiak700]

@@MalixOnAir Many thanks for answer

[@pa3160]

@@monco123 you seems to be too much experienced in this field.

[@bipinmaharana5301]

Stop bkground music.

[@MalixOnAir]

I wil

[@baynguyen9359]

Some segments in the video are stamped not adjacent to each other

[@Abdulbasit-bq4hi]

Why we are deducting 50microns from actual reading..... please rply fast

[@MalixOnAir]

Thickness of replica

[@nhungghamm4758]

Some segments in the video are stamped not adjacent to each other

[@Indian68228]

Painting ka coverage kaise nikal te hai btaiye plz

[@looterengine9778]

Good knowledge... Waiting for your new videos

[@mastankhadim.2091]

Can i get Bgas level 2 Notes for QC Inspector?

[@MalixOnAir]

yes

[@mastankhadim.2091]

Can you provide?

[@ajay_constantine]

This video alone actually covered 50% of BGAS GR 2!!

[@mustafaozbal5505]

Thank you.

[@MalixOnAir]

You are most welcome

[@Luxiic]

Nice

[@arunrajendran8269]

SIR NO BLOTTER TEST IN THIS VIDEO.

[@heavenlyworship2018]

well done , that is what i needed, make me learn more knowlege

[@ShahzadAhmed-ob7qc]

Very very nice video

[@MalixOnAir]

Thanks

[@technologyatease1642]

great informative videos I am subscribing you

[@roohulaminroohulamin4086]

Good Job

[@MalixOnAir]

Thanks

[@amalababu91]

Excellent 👍✨

[@ssaihtc8922]

Thanks for sharing 🙂🙂🙂

[@simplexination9837]

music is awsome bro...

[@MalixOnAir]

Thanks

[@vijaicm9478]

Nice

[@prakashano4749]

Good..
Give attention to avoid the contact of bare hand to blasted surface...

[@MalixOnAir]

Ok, sir

[@reynoldpanggabean209]

Why from the first you don't used hand glove