I'm very surprised people had negative things to say about this set. We bought ours from Home Depot about a month ago for about $2400, which included tax and pedestals. The pedestals were about $300 apiece, which I still think is crazily overpriced, but I will say that they raise the set up to a very comfortable level, which saves my back a lot of work. I also wanted a set that could handle big loads, especially our king-sized comforter. I was tired of hauling our comforter to the laundromat. The answer is yes, it easily handles oversized items, and the set does a beautiful job. I love how quiet the set is, as well - we hardly hear them. These sets do seem to have longer wash cycles, though, from my old set (a 1988 Kenmore) -- at least, I think. Average time seems to be about 1.5 hours on a regular cycle. Nothing has come out wringing wet or dirty. No leaks in the door. My husband is an appliance repairman and said with front-loaders, it's important to keep the washer door open between loads, so everything dries out and prevents mold of any kind. The dryer lint catcher is super-easy to clean out. I find the dryer occasionally needs a longer dry time, though, with items, especially heavier ones, like towels. Clothes, and especially towels, are sometimes still damp when they run through even a high-temp setting, so I run them through a "quick dry" cycle after the initial one and it finishes the load. That would be my only negative about this set: I think the dryer could use a little more oomph, but it's not a major issue. It's a pretty set, too. We're very happy with this washer and dryer.
You are absolutely right on. I bought this pair from Costco. Spent over $1,800 bucks. We had them only for 4 months and both machines have problems. Washer produced E1F4 error code on the display after just 3 times of use and machine was locked with bunch of laundry stock in it. I had to unplug it, waited 10 minutes and had to restart a new cycle, has happened already 4 times. Whirlpool Authorized Tech came in, diagnosed it and repluged one of the wires of heater components back, located in top par of the machine, fingers crossed no errors yet, we shall see. As far as dryer it started making exactly same noice that’s in the video just recently, it’s loud and annoying. Tech pushed in left side panel and noise temporarily went away while he had it pushed in with his hand. He said it was a just bad built and has ordered Sound Damp rubber type of liner to be installed inside of dryer’s left side panel. I will post later how it turned out. Not happy with purchase at all, after spending this much money. It’s very hard to return this type of equipment due to installation and delivery issues. We are basically stock with it. PLEASE DO NOT BUY THESE MAYTAG MODELS!!! It’s just a worthless name with that idiot Maytag repair man resting, in reality machines are totally crappy and low quality.
Just got this washer and have done two loads so far. I agree with what some of the other comments said about it not spinning well. It seems visually like it's working fine but I noticed the clothes are definitely heavier with water when I take them out than with my previous washer (Samsung). I even ran it again on just the drain & spin cycle but it made no difference.
Had an LG what a nightmare! Never again. Switched over to Maytag so happy with my Maytag, solid machine.. I don’t care for all the bells and whistles I just want my clothes well cleaned period. Super happy!
@@gjax57 My best friend has this same exact model you have but an older version and he's had it for 8+ years. I just kept reading some bad reviews online after Maytag was bought out my Whirlpool and apparently the quality dropping. Who knows. Thanks for the feedback
@@chrisginoc One thing I have learnt is to NOT listen to the reviews. Chris if I payed mind to the few bad reviews I would not buy ANYTHING lol. I was reluctant to buying the ninja digital fryer because of a few bad reviews but I bought it anyways and I absolutely love it. No offence to anyone but I just think some people don't know how to use a product or they just like to find fault with things. All I can say is we have had our Maytag now for a year and it hasn't failed me yet. (now watch after me saying that it will haha) anyways, good luck...hey even this video it was mentioned that consumer reports thought it was 1 of the best :)
Make sure you get an extended warranty, because in about 3 years you will start getting error codes on the Washer on a regular basis. It will save you in the long run with repair bills. The Dryer on the other hand seems rock solid.
Wowww my LG did the same thing! When it would spin it would shake the whole house 😳Crazy! So I’m trying to look for a new washer and dryer. Thank You for this video because I thought it was just mine that was doing that 😅thank you. I don’t mind the sounds compared to the vibrations that my LG makes OMG! I guess I’ll keep looking 😬Thank You for review of the Maytag but I don’t have a basement 😅
clean your vent tube and trap....we have the same dryer .. the lint tube was blocked going outside,,it is night and day .it is very quiet too now and dries clothes quickly
Good tip about cleaning lint filter. Also, if the dryer is running too long, lower the minutes. And estimate when clothes will be dry. He's sort of a wimp. :)
Good thing you returned those. If you didn't like that little dryer sound, you would have hated the loud buzzing the washer pump develops over time - a known issue with the washer.
The metal on metal noise has something to do with your venting system, not the dryer. There is most likely a small amount of play between the vent price being used and the duct coming out of the dryer itself.
I have both these units. Terrible units. Very difficult to turn on. Sometimes I turn them on and they never start. One second the turn on with a touch of the button, other times I have to get the count down from 3,2,1 before they will start. I tried to return mine but RC Willey would not take them back. Very poor starting button
I just got a dryer installed this past weekend, cannot figure out yet where to turn on a light if any, I had the washer already same band and I hate it it, uses to much water, just because my wife wanted to have the same brand, not cheap at all.
Great video, thank you for posting this! When you had this set did you wash a comforter or any large/heavy loads? I am wondering if the better suspension/load balancing is worth the extra cost over the 5630. Again, thanks for the great video and I hope you're still enjoying your Maytag set!
I bought Maytag washer and dryer in November od 2020. Wished I had them put in the street so the garbage truck could run over them. TOTAL waste of money. The washer does not spin the clothes like it should so I use the spin cycle and plus it takes an insane amount of time to get laundry done. The dryer does not dry clothes on the normal cycle so I use the quick dry cycle 3 times and my clothes are dry. Had LG before and again NO GOOD. BOSCH is what I should have done in the 1st place. Yes I have had the appliance repair out and they said nothing is wrong and they are coming back in 1 week.
At least you can get yours to spin. Ours will wash the clothes and then just make a chugging noise but not go on to spin. Repair guy says it is uneven load, not washing enough, must be too much soap, etc but the only load that went through was a load of 6 of the exact same towels. We have had the repair guy out several times but it still doesn’t wash then drain and spin. Can we park ours next to yours in the street?
Make sure the dryer vent that goes from the back of the dryer all the way outside of the house is not clogged any bit. It needs to be clear of any lint in order for the dryer to heat correctly.
anyone that has this washer - have you used oxyclean? i didn't have a front loader before so i didn't have this issue but i can't seem to figure out the proper way to add the oxyclean with my laundry... thanks in advance!
I have one just like this, washer that is. A total piece of Crap. Since we bought ours July 17,2022, the repair service has been to my house six, yes six times to try and find out what is wrong with this machine. When is goes into a spin cycle, it shakes to hard it starts walking in a circle. I added a piece of 3/4 inch plywood to make the floor stronger that was not weak anyway. They have replaced the main computer, the message board, all four shock absorbers and both load springs. last week, December 1,2022 they replaced the entire drum. The next load we the next day was two sheets and two pillow cases. The machine again danced and shook so violently it turned against the wall. They are coming again which will make the 7th time on Friday December 9 to see what is going on. If I had not paid cash, I would stop payment on this machine. I am going to demand Friday that they remove this machine and Whirlpool/Magtag can refund my damn money. One more thing. We bought the pedestal for the machine and they said it may be the problem. So they removed the pedestal and that was NOT the problem. The old Maytag Neptune we had for over 14 years never gave one problem until the Maine bearing went north.
Great review! As you can tell the controls are made of the cheapest plastic possible. In my 2017 Maytag model that was a lemon and replaced with a 2019 model similar to yours, you used to be able to turn on the drum light. Also, the rubber gasket in the 2019 model compared to the 2017 model (which they no longer make and had mold issues besides) is of subpar quality. The stainless steel washer drum does not seem as heavy duty as the 2017 model. The detergent dispenser fills up with water (not completely) but where you have to dry out with a cloth or paper towel so mold doesn't develop. I'm unable to hear the audible end of cycles either and my model has Wi-FI where you can use the MayTag app to monitor your washer, but unable to get the app to work. The Maytag repairman was here today and he could not increase the end of cycle sound and was not able to get the Wi-Fi app to work either. He told me to call Maytag - WTF? If you see the Maytag app has a 1.9 star rating in Google Play Store. I agree the tones they use sound childish and are so annoying. Another thing I hate about my Maytag washer which looks like yours but is a level up and has more features is that I have to hold the start button for 3 seconds in order to start the washer! What the heck was Maytag thinking? Can you imagine if you have to hold the lightswitch in your home for 3 seconds to turn on the light in your room or maybe hold down the button on your remote control for your TV for 3 seconds to turn the TV on or change a channel. As far as I'm concerned - Maytag is nothing more than a piece of junk just like the GE Profile appliances I purchased. Again, Great review and good luck!
Don't agree with your assessment of the tub. They are using the same tub and it is the same thickness as the old one. I have the Whirlpool version WFW6620. The only real thing that feels cheap is the plastic door, but you are right about the dial on the Maytag . This company should quit their lies about "better built"
@@jamesfor101 Well, that's just poor design and engineering on their part - I don't want to stand there and hold a start button for 3 seconds....that's ridiculous. I don't do that on the dryer, my dishwasher or oven....why the washer?
@@abunchahooey The hold button on my Maytag washer is 53 inches off the ground. If children (I don't have any) are tall enough to reach that, than they are old enough to do the laundry. Maybe make the 3 sec delay an option.
I loath this set!!! I work for a professional cleaning company that cleans vacation rentals. This set (and others equally as bad & frustrating) are in many houses. The washers often never actually start the wash cycle no matter what setting they are on. They never progress from the "sensing" stage. Only the Quick wash & Colors setting sp8n hard enough to get the clothes wrung out. Many, many times I have to waste time running the Drain & Spin cycle after the idiot machine shuts itself off. I open the door and the sheets, towels etc. are soaking wet and covered in soap bubbles. This wastes 17 minutes. In the vacation rental business, time is money, especially when guests are leaving and new ones are coming in the same day. I despise the dryer too!!! It shuts itself off every few minutes to "sense" if the soaking wet laundry is still freaking wet, even on the Timed dry setting. Case in point. I am cleaning today. The nice guests washed a load of towels before my team got here. I put the towels on the towel setting which is 1 hour and 29 minutes. Despite all the "sensing" it turned itself off after the entire setting and the towels are still very wet. Uggg!!! Seriously, DO NOT BUY THIS HORRIBLE SET! Buy a tried and true top loader with an agitator that actually gets your clothes, and linens clean and that you can add water to until the clothes are actually covered with enough water to get stuff clean. Get a basic dryer with simple times settings and temp control and put these new fangled computerized pieces of poop out of business. They don't save one ounce of energy because you have to run additional cycles almost EVERYTIME!
Oh my goodness. I’m at a hotel and I realized there is no water in the drum as it’s washing, the wet clothes just slap against each other. 😞 The previous load didn’t even smell clean so I have to run it again, thank goodness I don’t have to pay for it. These new age washers are junk. The load isn’t even big at all. I have a told loader with an agitator at home, I can’t wait for this trip to be over
Maytag has poor factory quality control and no warranty support. mine died after 2 months. They have done nothing for 5 weeks and won't offer an exchange unit I wait 9 weeks for service and parts... never ever ever every buy this brand.
![Best Washer And Dryers 2024 [don’t buy one before watching this]](http://i.ytimg.com/vi/TMGITDYQ8BY/mqdefault.jpg)
I'm very surprised people had negative things to say about this set. We bought ours from Home Depot about a month ago for about $2400, which included tax and pedestals. The pedestals were about $300 apiece, which I still think is crazily overpriced, but I will say that they raise the set up to a very comfortable level, which saves my back a lot of work. I also wanted a set that could handle big loads, especially our king-sized comforter. I was tired of hauling our comforter to the laundromat. The answer is yes, it easily handles oversized items, and the set does a beautiful job. I love how quiet the set is, as well - we hardly hear them. These sets do seem to have longer wash cycles, though, from my old set (a 1988 Kenmore) -- at least, I think. Average time seems to be about 1.5 hours on a regular cycle. Nothing has come out wringing wet or dirty. No leaks in the door. My husband is an appliance repairman and said with front-loaders, it's important to keep the washer door open between loads, so everything dries out and prevents mold of any kind. The dryer lint catcher is super-easy to clean out. I find the dryer occasionally needs a longer dry time, though, with items, especially heavier ones, like towels. Clothes, and especially towels, are sometimes still damp when they run through even a high-temp setting, so I run them through a "quick dry" cycle after the initial one and it finishes the load. That would be my only negative about this set: I think the dryer could use a little more oomph, but it's not a major issue. It's a pretty set, too. We're very happy with this washer and dryer.
Still have them?
How are they now?
You are absolutely right on. I bought this pair from Costco.
Spent over $1,800 bucks.
We had them only for 4 months and both machines have problems.
Washer produced E1F4 error code on the display after just 3 times of use and machine was locked with bunch of laundry stock in it. I had to unplug it, waited 10 minutes and had to restart a new cycle, has happened already 4 times. Whirlpool Authorized Tech came in, diagnosed it and repluged one of the wires of heater components back, located in top par of the machine, fingers crossed no errors yet, we shall see. As far as dryer it started making exactly same noice that’s in the video just recently, it’s loud and annoying. Tech pushed in left side panel and noise temporarily went away while he had it pushed in with his hand.
He said it was a just bad built and has ordered Sound Damp rubber type of liner to be installed inside of dryer’s left side panel. I will post later how it turned out.
Not happy with purchase at all, after spending this much money. It’s very hard to return this type of equipment due to installation and delivery issues.
We are basically stock with it.
PLEASE DO NOT BUY THESE MAYTAG MODELS!!!
It’s just a worthless name with that idiot Maytag repair man resting, in reality machines are totally crappy and low quality.
Just got this washer and have done two loads so far. I agree with what some of the other comments said about it not spinning well. It seems visually like it's working fine but I noticed the clothes are definitely heavier with water when I take them out than with my previous washer (Samsung). I even ran it again on just the drain & spin cycle but it made no difference.
Had an LG what a nightmare! Never again. Switched over to Maytag so happy with my Maytag, solid machine.. I don’t care for all the bells and whistles I just want my clothes well cleaned period. Super happy!
Also my mother has a Matag Front loader for 18 years! Still works like a champ!
Mine just arrived! I got a great deal for them. I’ll come back in a couple of months to post my review.
I'm thinking to purchase them Jul 4 sales, how is your experience so far? Thanks!
@@freedommattersministry9431 ours are good
How are they a year later Laura?
Also, think the control dial should light up with the different options so there's no need to turn the light on to see the settings.
We just bought the exact washer and I cant say enough good things about it. I highly recommend the washer JS
This Maytag over an LG? We are looking for a new 5.2 large front load washer and I cant decide.
@@chrisginoc I love my Maytag, I promise you you won’t be sorry if you buy the Maytag, IMO..good luck with what ever one you choose though
@@gjax57 My best friend has this same exact model you have but an older version and he's had it for 8+ years. I just kept reading some bad reviews online after Maytag was bought out my Whirlpool and apparently the quality dropping. Who knows. Thanks for the feedback
@@chrisginoc One thing I have learnt is to NOT listen to the reviews. Chris if I payed mind to the few bad reviews I would not buy ANYTHING lol. I was reluctant to buying the ninja digital fryer because of a few bad reviews but I bought it anyways and I absolutely love it. No offence to anyone but I just think some people don't know how to use a product or they just like to find fault with things. All I can say is we have had our Maytag now for a year and it hasn't failed me yet. (now watch after me saying that it will haha) anyways, good luck...hey even this video it was mentioned that consumer reports thought it was 1 of the best :)
@Wayne Grant going on 2 years now and still loving ours :)
Make sure you get an extended warranty, because in about 3 years you will start getting error codes on the Washer on a regular basis. It will save you in the long run with repair bills. The Dryer on the other hand seems rock solid.
Wowww my LG did the same thing! When it would spin it would shake the whole house 😳Crazy! So I’m trying to look for a new washer and dryer. Thank You for this video because I thought it was just mine that was doing that 😅thank you. I don’t mind the sounds compared to the vibrations that my LG makes OMG! I guess I’ll keep looking 😬Thank You for review of the Maytag but I don’t have a basement 😅
clean your vent tube and trap....we have the same dryer .. the lint tube was blocked going outside,,it is night and day .it is very quiet too now and dries clothes quickly
Good tip about cleaning lint filter. Also, if the dryer is running too long, lower the minutes. And estimate when clothes will be dry. He's sort of a wimp. :)
Good thing you returned those. If you didn't like that little dryer sound, you would have hated the loud buzzing the washer pump develops over time - a known issue with the washer.
The metal on metal noise has something to do with your venting system, not the dryer. There is most likely a small amount of play between the vent price being used and the duct coming out of the dryer itself.
Great review! Have you tried lowering the dryness level? Also, what does the Power button do for the dryer?
I have both these units. Terrible units. Very difficult to turn on. Sometimes I turn them on and they never start. One second the turn on with a touch of the button, other times I have to get the count down from 3,2,1 before they will start. I tried to return mine but RC Willey would not take them back. Very poor starting button
Also sometimes the dryer will not dry the clothes.
I just bought them. Nothing changed, bad Maytag design.
Wow!!! Thank you sooooooooooooooooooooo much Ranty! Easy peasy!
Is this washer still holding up good? What maintenance have you had to do to it?
Can anyone tell me how to get the cycle signal to work?
Purchased this set a few months ago and so far I hate it
Did everyone get extended warranty?
I have a similar set and my dryer makes the same noise. But once it gets fully hot then the noise goes away. I regret not buying LG or Electrolux.
BRO!!! THANKS SO MUCH FOR THE HONESTY. I AM ON THE PHONE PLACING AN ORDER AS I WATCHED THIS. UGH. NO THANKS MAYTAG. AGAIN BRO THANKS SO MUCH
Mikep1851 I think that you would love their washing machine though
I just got a dryer installed this past weekend, cannot figure out yet where to turn on a light if any, I had the washer already same band and I hate it it, uses to much water, just because my wife wanted to have the same brand, not cheap at all.
Great video, thank you for posting this! When you had this set did you wash a comforter or any large/heavy loads? I am wondering if the better suspension/load balancing is worth the extra cost over the 5630.
Again, thanks for the great video and I hope you're still enjoying your Maytag set!
hmm...this is for Maytag set, not LG :)
@@rkug777 haha thank you. Noted and edited.
Wait until you need to drag the washer out once a month and remove the back cover to get to the drum drain screen🙄
Hi, I have the same model , however I cant figure out how to do the washing times, please help thx
Looks nice. But I just don’t like square doors. It just makes it look like the inside is a square as well.
I bought Maytag washer and dryer in November od 2020. Wished I had them put in the street so the garbage truck could run over them. TOTAL waste of money. The washer does not spin the clothes like it should so I use the spin cycle and plus it takes an insane amount of time to get laundry done. The dryer does not dry clothes on the normal cycle so I use the quick dry cycle 3 times and my clothes are dry. Had LG before and again NO GOOD. BOSCH is what I should have done in the 1st place. Yes I have had the appliance repair out and they said nothing is wrong and they are coming back in 1 week.
At least you can get yours to spin. Ours will wash the clothes and then just make a chugging noise but not go on to spin. Repair guy says it is uneven load, not washing enough, must be too much soap, etc but the only load that went through was a load of 6 of the exact same towels. We have had the repair guy out several times but it still doesn’t wash then drain and spin. Can we park ours next to yours in the street?
You should be able to press the cycle signal button to make it louder
Thanks man- appreciate the video
Maytag washer is difficult to clean filter which is really really irritating
Good luck using liquid detergent, the spider will crap out in a few years. Also no prewash option in the washer, nor accessible filter. So it's a fail
How do I add more water to the washer? My clothes isn't fully wet. I'm struggling omg 😥
Get a top loader that is NOT HE
@@fargeeks good luck!
Use a different cycle. If u use teh normal eco from r save the planet resources the machine won't take any way weter
Try the bulky setting
Wgat cycle are you using
How do I remove the error code f6 e3
This thing is to confusing it should be a lot simpler my clothes are always wet
it adjusts to its operator..lol..
FYI Machines were still made to last in the 70's.
شفيه نشافة يوقف عليه ماذا ؟ لان نشافة مكتوب عليه End ميروح بس في 57:0
Just bought a dryer but the heating doesn't seem to be hot at all? Am I missing something
Make sure the dryer vent that goes from the back of the dryer all the way outside of the house is not clogged any bit. It needs to be clear of any lint in order for the dryer to heat correctly.
What did you replace them with?
Do you still have this set?
I had a Maytag dryer. That noise gets worse unfortunately.
Yeah… not a fan…
anyone that has this washer - have you used oxyclean? i didn't have a front loader before so i didn't have this issue but i can't seem to figure out the proper way to add the oxyclean with my laundry... thanks in advance!
Jenna Ranieri put in dry drum before clothing
Just put it directly in the washer before the cloths.
Try using dryer sheets
Loved your review, what did you end up buying to replace this set?
Thanks for the video!
I was about to buy it. I guess I will stick with LG.
Update get machines that has turbo wash on it for extra water
Thats what the extra power function does
Get gas....the heat is more even and does not get so hot. Electricity is harder to regulate.
They look like Samsungs to me from a distance.
I have one just like this, washer that is. A total piece of Crap. Since we bought ours July 17,2022, the repair service has been to my house six, yes six times to try and find out what is wrong with this machine. When is goes into a spin cycle, it shakes to hard it starts walking in a circle. I added a piece of 3/4 inch plywood to make the floor stronger that was not weak anyway. They have replaced the main computer, the message board, all four shock absorbers and both load springs. last week, December 1,2022 they replaced the entire drum. The next load we the next day was two sheets and two pillow cases. The machine again danced and shook so violently it turned against the wall. They are coming again which will make the 7th time on Friday December 9 to see what is going on. If I had not paid cash, I would stop payment on this machine. I am going to demand Friday that they remove this machine and Whirlpool/Magtag can refund my damn money. One more thing. We bought the pedestal for the machine and they said it may be the problem. So they removed the pedestal and that was NOT the problem. The old Maytag Neptune we had for over 14 years never gave one problem until the Maine bearing went north.
Beep Beep like the 70s 😁
Great review! As you can tell the controls are made of the cheapest plastic possible. In my 2017 Maytag model that was a lemon and replaced with a 2019 model similar to yours, you used to be able to turn on the drum light. Also, the rubber gasket in the 2019 model compared to the 2017 model (which they no longer make and had mold issues besides) is of subpar quality. The stainless steel washer drum does not seem as heavy duty as the 2017 model. The detergent dispenser fills up with water (not completely) but where you have to dry out with a cloth or paper towel so mold doesn't develop. I'm unable to hear the audible end of cycles either and my model has Wi-FI where you can use the MayTag app to monitor your washer, but unable to get the app to work. The Maytag repairman was here today and he could not increase the end of cycle sound and was not able to get the Wi-Fi app to work either. He told me to call Maytag - WTF? If you see the Maytag app has a 1.9 star rating in Google Play Store. I agree the tones they use sound childish and are so annoying. Another thing I hate about my Maytag washer which looks like yours but is a level up and has more features is that I have to hold the start button for 3 seconds in order to start the washer! What the heck was Maytag thinking? Can you imagine if you have to hold the lightswitch in your home for 3 seconds to turn on the light in your room or maybe hold down the button on your remote control for your TV for 3 seconds to turn the TV on or change a channel. As far as I'm concerned - Maytag is nothing more than a piece of junk just like the GE Profile appliances I purchased. Again, Great review and good luck!
Don't agree with your assessment of the tub. They are using the same tub and it is the same thickness as the old one. I have the Whirlpool version WFW6620. The only real thing that feels cheap is the plastic door, but you are right about the dial on the Maytag . This company should quit their lies about "better built"
Holding the button down for 3 seconds prevents children from turning washer on
@@patcola7335 I guess they are sourcing the tubs from different suppliers.
@@jamesfor101 Well, that's just poor design and engineering on their part - I don't want to stand there and hold a start button for 3 seconds....that's ridiculous. I don't do that on the dryer, my dishwasher or oven....why the washer?
@@abunchahooey The hold button on my Maytag washer is 53 inches off the ground. If children (I don't have any) are tall enough to reach that, than they are old enough to do the laundry. Maybe make the 3 sec delay an option.
Thx for sharing
My clothes come out wet every time
Probably because your putting the lowest setting
These are absolutely junk. Won’t dry clothes completely no matter what. I have tried every setting. Don’t waste your money.
What did you get instead?
A set from LG check out my other video. ua-cam.com/video/2A5bosOEmQQ/v-deo.html
I loath this set!!!
I work for a professional cleaning company that cleans vacation rentals. This set (and others equally as bad & frustrating) are in many houses. The washers often never actually start the wash cycle no matter what setting they are on. They never progress from the "sensing" stage. Only the Quick wash & Colors setting sp8n hard enough to get the clothes wrung out. Many, many times I have to waste time running the Drain & Spin cycle after the idiot machine shuts itself off. I open the door and the sheets, towels etc. are soaking wet and covered in soap bubbles. This wastes 17 minutes. In the vacation rental business, time is money, especially when guests are leaving and new ones are coming in the same day.
I despise the dryer too!!! It shuts itself off every few minutes to "sense" if the soaking wet laundry is still freaking wet, even on the Timed dry setting. Case in point. I am cleaning today. The nice guests washed a load of towels before my team got here. I put the towels on the towel setting which is 1 hour and 29 minutes. Despite all the "sensing" it turned itself off after the entire setting and the towels are still very wet. Uggg!!! Seriously, DO NOT BUY THIS HORRIBLE SET! Buy a tried and true top loader with an agitator that actually gets your clothes, and linens clean and that you can add water to until the clothes are actually covered with enough water to get stuff clean. Get a basic dryer with simple times settings and temp control and put these new fangled computerized pieces of poop out of business. They don't save one ounce of energy because you have to run additional cycles almost EVERYTIME!
Oh my goodness. I’m at a hotel and I realized there is no water in the drum as it’s washing, the wet clothes just slap against each other. 😞 The previous load didn’t even smell clean so I have to run it again, thank goodness I don’t have to pay for it. These new age washers are junk. The load isn’t even big at all. I have a told loader with an agitator at home, I can’t wait for this trip to be over
Door on want started
Maytag has poor factory quality control and no warranty support. mine died after 2 months. They have done nothing for 5 weeks and won't offer an exchange unit I wait 9 weeks for service and parts... never ever ever every buy this brand.