A great deal of respect for Changing clutches on the floor and for making a good quality video of the task. Most people won't appreciate how difficult a job this is even on a ramp let alone on the floor. Also the knowledge you have of the different vehicle types etc. Once again ultimate respect for what you do.
Hi mr WILLIAMS. I just want to thank you from France. I could change a clutch on my 2005 Ford mondeo 2.2 TDCI thanks to you. The 2005 Ford mondeo 2.2 TDCI and the 2007 2.0TDCI ZETECH videos were very helpfull. I take my time, and now it's done. The way you shoot your videos are so precious and detailed. So thanks a lot, you do a great job under a car, but an another one as much great to filming your job, cut it, and upload it on youtube. Un grand merci pour vos vidéos et votre partage! Kind regards
EcogreenDetail It’s a little bit out of our coverage area. But for a UA-cam subscriber we can always make an exception. What’s your registration please
Man’s a legend, I changed my csc about a year ago (couldn’t afford a new flywheel etc at the time) now just over a year I’ve had to replace the flywheel clutch the whole lot and again did it using this video on my drive 🙈 I’d have took ages without this vid top bloke
I have seen the video and I must say, my big big respekt for what you did. Unbelivable to change a clutch on the street , on the ground without a lifting platform. I hope to see mor of your videos with the Mondeo. All the best. Klaus from Hockenheim, Germany
Absolutely amazing, I have the Mondeo, had a few clutches done and never a popular job because of the sub frame needing to be lowered, it's usually The DMF that goes on these as you will know. Next time it starts to go then I'll be coming to you for a quote for sure. I'm not a mechanic but I'll attempt most things, slowly, you have my utmost respect for what you do and you put most garages to shame.
Billy boy , youve got the talent and spirit to talk to the machines, sounds daft but they do..well done.. my days are over swopping gearboxes on drives but your even better than i was.. carry on.. you got my vote...
What a quality video I was considering buying a St 2.2 mondeo that needs a new clutch .. I’m quite handy with most fords But not a mechanicbut after watching the amount of work required to change a this part Iv had a change of heart 😂 ..however ur work is super clean and made it look so easy big respect to u 👊🏻
pas de bla bla et d'arrangement inutile,video bien filmé,détail bien visible,excellent tuto fait par une personne visiblement trés compétente,merci kevin-albert williams.
Je pense devoir changer le mien aussi dans pas longtemps sur un 2.2 155ch! J'hésite entre un volant moteur bi-masse ou simple tant qu'à démonter autant faire les 2 ! Le bi-masse est plus souple et vu mon kilométrage ça fera l'affaire ! Tu es un bon mécanicien camarade force à toi 👍🇲🇫
Vous avez beaucoup de courage de le faire dans les conditions climatiques les plus extrêmes, je ne peux que vous félicitez. J'ai une ford mondeo mk3 1.8 essence, juste pour info si on démonte le berceau, on doit refaire un parallélisme complet du fait que celui-ci n'est plus centré, sur votre vidéo, on voit beaucoup de fuite d'huile même sur la boîte, le joint spi est a vérifié et à changé si celui-ci fuit. Bon courage pour la suite et encore bravo.
@@WMCS i can imagine mate i brake them for parts usualy cut them when customer wants subframe but i did a clutch on a st not long back that was spinning the front passenger only way around was cut into floor not a fun job
Just finished changing the inner slave on mine, i would have never attempted to do this by myself if it wasnt for your video (i did have a mate help me wiggle the gear box in/out havent a clue how you made it look that easy bud 🤣) although it fort me through tooth and nail with 2 subftame bolts snapping both bottom ball joints and offside driveshaft were ceased in the hub, i made the brake disk explode with a huge gear puller and naffed the 1st couple of threads of the drive shaft in the process, the nearside driveshaft fort me coming out + fort me going in despite unbolting the bracket off of the engine... other than that it "wasnt to bad" 🤣
Sounds like you had a lot more fun than I did 🍻😂.., but you smashed it tho. I was literally laughing my head off reading your message .., f***ing funny 😂 that was.. bet it wasn’t whilst you were in the thick of it tho. Great that you shared that .. good effort for tackling that repair 🍻🍻🍻🍻🍻
Did mine using your video couldn’t of done it without you, big thanks 👍👍👍 (nearly killed lifting the gearbox it was mega heavy you made it look easy lol 👍)
Good video reminds me of my clutch change intact wrench is your best friend but you must eat extra weetabix as it took me and my mate to move gearbox you made light work Good job nice to see another 05 st tdci being worked on hope it is a euro 3 same as mine
i remember owning a Peugeot 405 sri with a knackered clutch and i booked it in with my local garage. when i got the car back my mechanic told me that i got my money's worth out of the old one. the clutch was worn down to the rivets and the release bearing was just a molten lump of metal. he asked me how i managed to change gear and i said i adjusted the clutch as far as i could with a spanner but ended up having to match the revs but ultimately ended up with a bit of crunching!
@@WMCS you're the only company that fixes the clutch buy the customer 👍👌their isn't no company in Germany or austria.. What a mess... But am asking myself how long do you can do this hard job? .. Best regards
Massive respect to you pal, doing clutches on your back outside are not the easiest of jobs, especially with the weather being unpredictable, wondering what you do when it stars raining? I've used a gazebo before now.
Billy Brown I’ve been doing clothes all year round for 6 years now. I just put on my waterproof and crack on. I get highly motivated by the pay 💰 at the end. 😆 lol.
No 🗣 just 🔧📹. Seriously, it's absolutely inspiring to see clutch replacement without workshop lifters. What's the weight of the gearbox? 😅 Nvm. Great job!
Zdravím skvělá prace klobouk dolu zrovna jsem taky nechal měnit komplet spojkovou sadu u mechanika komplet ale nejsem spokojeni rychlost 1.2 Ok 3, 4 jako by přes zuby 5,6 Ok můžete poradit čím to muže být dekuji za odpověď
talatos03 oui toujour les meme chose. J’aime biens par ce que c’est toujours different voitures et different location. Est plus important sa peille biens...
Are there much differences in whole procedure between 2.2 and 2.0 TDCI (Duratorq)? My flywheel is falling apart because none of previous owners ever changed it xD
encore du beau travail...cette fois ci je tombe sur une mondéo! pensez vous que pour une mondéo 1.8 td break 1997 moteur endura, le travail est le même? ou c'est moins difficile? le berceau moteur doit être démonté de la même façon? merci de m'avoir répondu la dernière fois. Vous êtes vraiment très fort et le fait d'effectuer ce travail en extérieur prouve à quel point vous êtes courageux et organisé! mais le plus surprenant c'est la qualité de vos vidéos.......bravo! thank you véry much ....thierry!
I have two questions: 1. How do you remember where to connect all the pipes, wires, clips and brackets? 2. Do you often find you have parts left over at the end of the job and wonder what they are?
I'm half way there, I think the slave cylinder is broken and brake fluid is leaking. I'll see if I can replace it and keep fly wheel maybe? Anyway I will update later. Thanks
@@WMCS right, thanks, I thought I'd get away with replacing less parts. Everything was working fine until one day the pedal went down and fluid started leaking. The next day the pedal was hard again then after one press flat once more. I could feel a bit of a scratch when depressing before everything went bust. I didn't think that the dual mass flywheel could affect it but the whole kit is not that much dearer. I'll change it all. Thanks for replying so fast. I will definitely share your channel on my Facebook. Much appreciated 👍
@@WMCS Hello. thank you for replying, I am subscribed to your channel, and have been for a long time. I don't see any MK5 Mondeo. only the older models. I have to do a clutch myself shortly and was just looking for any tips.. not to worry. thanks anyway.
Definitely need to drain the oil out first. See the Jaguar repair on the channel. For more in depth illustrations. Exactly the same engine and platform
Hi Kevin... Great work...!!!... Is it possible to change the clutch on a Mondeo V6, like you do it in this video, just lowering the subframe in the left side ??... Better yet.. Please come to denmark and do mine :-)
WedelDK 🤩😂... mate I’ll be happy to visit Denmark 🇩🇰 and to do a clutch. ... But to answer your question. Yes definitely the same procedure applies to the V6... the gearbox is pretty much the same. Only difference is where the gear linkage is attached. But otherwise the V6 has more accessibility to work from the top end. ...
Kevin-Albert Williams Thanx. Well. All ready to change the clutch and i thought to my self, better check the rest of the Car first to be sure no surprices. Dropped a hammer clean thriugh the rear body frame. No need to work on the clutch, just buy another car 🤥
Very romantic way to do a shit job with the birds chirping in the background ... Congratulations, a great job that others don't even want to do in a workshop!
Good job mate, Might need mine doing soon, Where abouts are you located?? Wondered how much you charge to do this, wouldnt of minded seeing you do the clutch itself plus filling the gearbox back up, Mainly out of curiosity if I was to tackle it by myself, Even still good job bud.
Hi just wondering how much you charge as I've got a st tdci myself as I'm thinking about doing this myself as I think I'm more than capable after seeing this video cheers
hello, my clutch and my steering wheel are new but they skate in 3, 4, 5 speeds ... would you have a solution apart from dismantling everything? thank you so much
@@WMCS if I accelerate frankly from 3rd gear, it skates ... same thing for 4th and 5th gear. Sorry for my English, I am writing to you with google translation! :)
@@WMCS I want to hold on to it. But my car needs a new clutch too, and it is just way to much work. And i got no time, and i'm not the best at fixing cars.
A great deal of respect for Changing clutches on the floor and for making a good quality video of the task. Most people won't appreciate how difficult a job this is even on a ramp let alone on the floor. Also the knowledge you have of the different vehicle types etc. Once again ultimate respect for what you do.
Lincs Poacher
Thanks for the feedback. It’s not the easiest whilst filming. All the best to you too.
Hi mr WILLIAMS.
I just want to thank you from France.
I could change a clutch on my 2005 Ford mondeo 2.2 TDCI thanks to you.
The 2005 Ford mondeo 2.2 TDCI and the 2007 2.0TDCI ZETECH videos were very helpfull.
I take my time, and now it's done.
The way you shoot your videos are so precious and detailed.
So thanks a lot, you do a great job under a car, but an another one as much great to filming your job, cut it, and upload it on youtube.
Un grand merci pour vos vidéos et votre partage!
Kind regards
This is the best clutch changing videos I’ve seen on UA-cam ...
EcogreenDetail
Thanks for a great feedback
Kevin Williams I wonder could you travel to Bristol 🙂
EcogreenDetail
It’s a little bit out of our coverage area. But for a UA-cam subscriber we can always make an exception.
What’s your registration please
My Sidter does what you do, Lays on her back,lots of time on her knees, bent over 50% of the time,Giggity. Great work my man.
Man’s a legend, I changed my csc about a year ago (couldn’t afford a new flywheel etc at the time) now just over a year I’ve had to replace the flywheel clutch the whole lot and again did it using this video on my drive 🙈 I’d have took ages without this vid top bloke
I have seen the video and I must say, my big big respekt for what you did. Unbelivable to change a clutch on the street , on the ground without a lifting platform. I hope to see mor of your videos with the Mondeo. All the best. Klaus from Hockenheim, Germany
Thanks for a great feedback and for supporting the channel 🍻
Absolutely amazing, I have the Mondeo, had a few clutches done and never a popular job because of the sub frame needing to be lowered, it's usually The DMF that goes on these as you will know. Next time it starts to go then I'll be coming to you for a quote for sure. I'm not a mechanic but I'll attempt most things, slowly, you have my utmost respect for what you do and you put most garages to shame.
Billy boy , youve got the talent and spirit to talk to the machines, sounds daft but they do..well done.. my days are over swopping gearboxes on drives but your even better than i was.. carry on.. you got my vote...
What a quality video I was considering buying a St 2.2 mondeo that needs a new clutch .. I’m quite handy with most fords But not a mechanicbut after watching the amount of work required to change a this part Iv had a change of heart 😂 ..however ur work is super clean and made it look so easy big respect to u 👊🏻
Unbelievable…… what a talent ….. saw him do a tdci estate mondeo and that was tricky looking and here he is doing another mondeo !
pas de bla bla et d'arrangement inutile,video bien filmé,détail bien visible,excellent tuto fait par une personne visiblement trés compétente,merci kevin-albert williams.
Merci
Je pense devoir changer le mien aussi dans pas longtemps sur un 2.2 155ch! J'hésite entre un volant moteur bi-masse ou simple tant qu'à démonter autant faire les 2 ! Le bi-masse est plus souple et vu mon kilométrage ça fera l'affaire ! Tu es un bon mécanicien camarade force à toi 👍🇲🇫
Always Dual mass
Vous avez beaucoup de courage de le faire dans les conditions climatiques les plus extrêmes, je ne peux que vous félicitez. J'ai une ford mondeo mk3 1.8 essence, juste pour info si on démonte le berceau, on doit refaire un parallélisme complet du fait que celui-ci n'est plus centré, sur votre vidéo, on voit beaucoup de fuite d'huile même sur la boîte, le joint spi est a vérifié et à changé si celui-ci fuit. Bon courage pour la suite et encore bravo.
Stephane Vincent merci bien ... mon francais c’est un Peut limiter... j’espere que votre mondeo est ok. Excuse un Peut mon francais
They ought to make some of these car manufacturers & designers work on some of these cars. Respect Kevin this looks an absolute nightmare!!!!
I think they’ll apply for immunity
Bravo!!! One of those jobs you only ever want to do once!! :)
Agree with others, best clutch change video there is, very very skilled, just brake pads and discs can drive me up the wall.
matt jones thanks Matt... got a few more uploads coming over.
I take it you’re a working mechanic as well... thanks for the feedback
Good skills mate, wish you covered Wales as I need a clutch on a Transit Connect. Thanks for the upload.
I'm doing my mates tomorrow, did my mk3 dmf luk rep kit a few year back on stands... pretty much my first job on a car other than disks and pads
spot on video, there a frigging nightmare when you work on some older mrk3 with subframe bolts can be horrid. great job though mate
Craig Jordan I’ve had to abandon one or two of these repairs. When the bolts starts spinning inside the chassis box section. Nightmare is the word. 😆
@@WMCS i can imagine mate i brake them for parts usualy cut them when customer wants subframe but i did a clutch on a st not long back that was spinning the front passenger only way around was cut into floor not a fun job
Craig Jordan once or twice I’ve had to cut small square section just enough to fit a spanner. So you’re busy taking things apart all day then.
@@WMCS So the only option then is to take the engine out completely and then change all of it?
Just finished changing the inner slave on mine, i would have never attempted to do this by myself if it wasnt for your video (i did have a mate help me wiggle the gear box in/out havent a clue how you made it look that easy bud 🤣) although it fort me through tooth and nail with 2 subftame bolts snapping both bottom ball joints and offside driveshaft were ceased in the hub, i made the brake disk explode with a huge gear puller and naffed the 1st couple of threads of the drive shaft in the process, the nearside driveshaft fort me coming out + fort me going in despite unbolting the bracket off of the engine... other than that it "wasnt to bad" 🤣
Sounds like you had a lot more fun than I did 🍻😂.., but you smashed it tho.
I was literally laughing my head off reading your message ..,
f***ing funny 😂 that was..
bet it wasn’t whilst you were in the thick of it tho.
Great that you shared that .. good effort for tackling that repair 🍻🍻🍻🍻🍻
you are a god of the clutch
Did mine using your video couldn’t of done it without you, big thanks 👍👍👍 (nearly killed lifting the gearbox it was mega heavy you made it look easy lol 👍)
Good video reminds me of my clutch change intact wrench is your best friend but you must eat extra weetabix as it took me and my mate to move gearbox you made light work Good job nice to see another 05 st tdci being worked on hope it is a euro 3 same as mine
Thanks for the feedback and for sharing on our forum. They are a tad heavy 😂them gearboxes.
i remember owning a Peugeot 405 sri with a knackered clutch and i booked it in with my local garage. when i got the car back my mechanic told me that i got my money's worth out of the old one. the clutch was worn down to the rivets and the release bearing was just a molten lump of metal. he asked me how i managed to change gear and i said i adjusted the clutch as far as i could with a spanner but ended up having to match the revs but ultimately ended up with a bit of crunching!
Thank you so much, it was really helpful for me. I supported you with modest donate.
Really appreciate it. Thankyou very much.
Great job! Congrats!
Bonjour très bonne vidéo et pas de bla bla 👍🔧
The clutches warrior 👍🏽
hello from France, thank you very much, very good job!!!
Merci beaucoup
A big respect... This is hard workout!! 💪.. Even if it is cold or hot.. 👌💯
All weather mate.
@@WMCS you're the only company that fixes the clutch buy the customer 👍👌their isn't no company in Germany or austria.. What a mess... But am asking myself how long do you can do this hard job? .. Best regards
Massive respect to you pal, doing clutches on your back outside are not the easiest of jobs, especially with the weather being unpredictable, wondering what you do when it stars raining? I've used a gazebo before now.
Billy Brown I’ve been doing clothes all year round for 6 years now.
I just put on my waterproof and crack on. I get highly motivated by the pay 💰 at the end. 😆 lol.
@@WMCS 😂 skills pays the bills👍
Billy Brown that’s right mate. The game is to be sold not to be told ...😂. Thanks for popping by the channel mate.
Absolutely amazing
Mate, you have the heart of a Lion... 👏👏👏
No 🗣 just 🔧📹. Seriously, it's absolutely inspiring to see clutch replacement without workshop lifters.
What's the weight of the gearbox? 😅 Nvm. Great job!
muy bueno video , felicidades
Thankyou.
Zdravím skvělá prace klobouk dolu zrovna jsem taky nechal měnit komplet spojkovou sadu u mechanika komplet ale nejsem spokojeni rychlost 1.2 Ok 3, 4 jako by přes zuby 5,6 Ok můžete poradit čím to muže být dekuji za odpověď
Damn man👌
Im a mechanic as well over in belgium
That certainly isnt the nicest job changing a clutch without a lift
Respect 👌
A master at his work!
Did you not film the gearboxoil refill or did i miss it?
How does the refill work?
On the older videos I didn’t show a few things. On the newer ones I do. Check the Jaguar repair on the channel.
Great video, I wish I had the confidence to do my Galaxy.
Check the channel. There’s specific galaxy repair.
@@WMCS I couldn’t see it... 😳☹️
Bonne travaille Kevin merci
talatos03 pas de probleme...ca vas bien en France..?
Oui ça va bien la France boulo maison boulot maison comme un robot tu fais toujours la même chose
talatos03 oui toujour les meme chose. J’aime biens par ce que c’est toujours different voitures et different location.
Est plus important sa peille biens...
Kevin tu es un bon mécanicien ça se voit tu fais un bon boulot bon courage
Excellent video, congratulations.
Where can I find the special tool to align the kit?
Thank you
I've got a decat pipe thatwould go nicely with that beast
Are there much differences in whole procedure between 2.2 and 2.0 TDCI (Duratorq)? My flywheel is falling apart because none of previous owners ever changed it xD
encore du beau travail...cette fois ci je tombe sur une mondéo! pensez vous que pour une mondéo 1.8 td break 1997 moteur endura, le travail est le même? ou c'est moins difficile? le berceau moteur doit être démonté de la même façon? merci de m'avoir répondu la dernière fois. Vous êtes vraiment très fort et le fait d'effectuer ce travail en extérieur prouve à quel point vous êtes courageux et organisé! mais le plus surprenant c'est la qualité de vos vidéos.......bravo! thank you véry much ....thierry!
Respect 👍👍👍👍👍👍👍
Gute Arbeit mein Freund
very good job my friend well done from a man ho know what this job meens
I have two questions:
1. How do you remember where to connect all the pipes, wires, clips and brackets?
2. Do you often find you have parts left over at the end of the job and wonder what they are?
Not sure how to answer that one.
I'm half way there, I think the slave cylinder is broken and brake fluid is leaking. I'll see if I can replace it and keep fly wheel maybe? Anyway I will update later. Thanks
Replace the DMF. That’s why the slave is leaking
@@WMCS right, thanks, I thought I'd get away with replacing less parts. Everything was working fine until one day the pedal went down and fluid started leaking. The next day the pedal was hard again then after one press flat once more. I could feel a bit of a scratch when depressing before everything went bust. I didn't think that the dual mass flywheel could affect it but the whole kit is not that much dearer. I'll change it all.
Thanks for replying so fast. I will definitely share your channel on my Facebook. Much appreciated 👍
Hello , just wondered if you have replaced the clutch in any 2015 Mondeo models please
Subscribe and access the channel ., you should find one in there.
@@WMCS Hello. thank you for replying, I am subscribed to your channel, and have been for a long time. I don't see any MK5 Mondeo. only the older models. I have to do a clutch myself shortly and was just looking for any tips.. not to worry. thanks anyway.
When u pulled driveshaft out did u lose any oil from gearbox as just came across on mine no oil came out but ends of shafts were wet in oil
Definitely need to drain the oil out first. See the Jaguar repair on the channel.
For more in depth illustrations.
Exactly the same engine and platform
No hace falta purgado?
Don't fancy a free holiday to the hebrides by any chance? I have 2 mondeos needing clutches done 😢
I wouldn’t mind over a weekend .,
Hi Kevin... Great work...!!!... Is it possible to change the clutch on a Mondeo V6, like you do it in this video, just lowering the subframe in the left side ??... Better yet.. Please come to denmark and do mine :-)
WedelDK 🤩😂... mate I’ll be happy to visit Denmark 🇩🇰 and to do a clutch. ...
But to answer your question. Yes definitely the same procedure applies to the V6... the gearbox is pretty much the same. Only difference is where the gear linkage is attached. But otherwise the V6 has more accessibility to work from the top end. ...
Kevin-Albert Williams
Thanx. Well. All ready to change the clutch and i thought to my self, better check the rest of the Car first to be sure no surprices. Dropped a hammer clean thriugh the rear body frame. No need to work on the clutch, just buy another car 🤥
WedelDK oh nooo... was it just rusted through... the older fords are renown to have underside sill rust away...
Very romantic way to do a shit job with the birds chirping in the background ...
Congratulations, a great job that others don't even want to do in a workshop!
seen this cracking job just saved ur number in my phone just got the same car what would something like this cost if parts was provided thank you
About £300 incl oil and clutch fluid.
Thanks mate handy to know mate n I am in le11
Good job mate, Might need mine doing soon, Where abouts are you located?? Wondered how much you charge to do this, wouldnt of minded seeing you do the clutch itself plus filling the gearbox back up, Mainly out of curiosity if I was to tackle it by myself, Even still good job bud.
James Daniels i travel quite far... sometimes up to 100miles from bedford.
Contact www.williamsmobileclutch.co.uk
07376369067
Hi just wondering how much you charge as I've got a st tdci myself as I'm thinking about doing this myself as I think I'm more than capable after seeing this video cheers
Darren it’ll roughly be about £750
hey is it the same for a mazda 6?
No it’s different
hi what kind of battery drive do you have?
Gabor Hafra it’s a Milwaukee fuel.
hello, my clutch and my steering wheel are new but they skate in 3, 4, 5 speeds ... would you have a solution apart from dismantling everything? thank you so much
Gazoil24fps when you say skate. What is it exactly you mean. So I can better understand the fault.
@@WMCS if I accelerate frankly from 3rd gear, it skates ... same thing for 4th and 5th gear. Sorry for my English, I am writing to you with google translation! :)
Gazoil24fps it sounds like your pressure plate may be worn and not grabbing the clutch properly. Hope that helps.
Would this be the same for the jag x type
Anthony Seab that’s exactly the same as the Jag
@@WMCS cheers kev , where are you based buddy , local mobile mechanics wont touch it , say its a garage job with ramp ,
Anthony Seab I’d tackle that repair for you in about 4 hours no problem...
I travel quite far , what’s the first half of your postcode
Awesome video, but naah. I'm saying goodbye to my Mondeo.
That’s a classic that mondeo is. Hold on to it mate.
@@WMCS I want to hold on to it. But my car needs a new clutch too, and it is just way to much work. And i got no time, and i'm not the best at fixing cars.
How much do u charge mate on these st tdci mate
Hey Richard.
Send over some details and I’ll get a price over to you.
www.williamsmobileclutch.co.uk
@@WMCS OK cool
Currently trying to put the gearbox back in on a 2006 2.2TDCI 6speed but it just won't slide in for some reason, any ideas what could be causing this?
How did you get on.
It just needs a little bit of persuasion..,
Hope you’ve managed ok.
You busy mate??
Philip Burtonwood
Did you want a repair doing.
😅 on floor 👍👍👍👍👍👍👍👍👍
Gearbox drains in those positions are designed to make you get it all over yourself and stink of gear oil until you retire
🤣😂..,,, it is a bit tight getting in there. I’ve had to cut an Allen key just for it ...
Hope you’re good your end.
wanna do mine???
Yep…
www.williamsmobileclutch.co.uk
Sorry mk5 mondeo model
What a poxy design.All that work to replace a component that wears out and needs regular renewal. Not looking forward to doing mine.
You are good! I hate ford
gregos73
Thanks