Most informed and details description of this online hands down. I appreciate the white board explanation as well over a in car demo as the theory is much more concrete
You can run 2 pumps and have a power 3.....1 pump for the front and 1 for the rear...BUT with 4 dumps. 6 dumps total ....It works but it's mainly for import setups. I did a 1 pump 12 switch setup back in the 90s it worked great with accumulators on a
Thanks. I been around it along time and all hands on. I've learned the hard way and got to where I'm at now with cars. Having a dependable lowrider is what its about. I don't know everything and theres all kinda ways to do stuff I just share what I can and hope it helps.
Your welcome, if your looking to do suspension work on the eldo I deff would consider airbags. You can get direct bolt in kits pretty cheap. Bags may not be what your looking for but if you did juice it it'll pretty much be "lay & play" anyways so you could get the same from bags. Just a thought
Can't believe nobody corrected your thought in 6 years. Yes we know how 3 wheel works. A bridge and 3 pump setup allows standing 3 wheel without being in motion. In a g-body you can add sand bags or find a couple hundred pound friend to sit on a corner.
1st things 1st. You will not be able to use a chain bridge for power 3 wheel without a 3rd pump. As far as reinforcing goes thats hard to say. People charge different prices and also the extent of reinforcement being done. Stress points to minor plated to full frame boxing all carry its on price for a bridge plating the frame arches and reinforcing the rearend are pretty much necessary. All that plus a bridge maybe 6-800. Shop around and make sure whoever does it knows what their doing. Will be bad if done half ass when something breaks.
Yea I mainly just wanted to be able to hit threewheel and raise it up not nessecarily hop it. I have a 80 monte carlo thats primerd out and gutted but its got most of the stuff for hydros already. Was parted out before I got it but I got it for cheap lol jusy needs battereys and pumps maybe a better choice in the end huh lol thanks man helped a bunch if I have any other questions i know where to go !
well thats one way to explain it alto i dont think its totaly accurate. the car 3 wheels so easy because the chains move the piviot point from the cylinder and power ball to the chain more inboard on the body and axle making it easier to tip over. if it was just picking up the front end like in the scenario with the Jack like you said that all cars equpied with chains could 3 wheel and they cant. hoppers use chains parallel to the rear cylinder to compress the spring before hopping but they don't three-wheel very well because you're not moving the Pivot Point like you would have to chain was in the middle
yes my comment is I have 16 inch cylinders in the back and my rear end when it's all the way down till it's up 45° and when it's all the way up until it's now 45 degrees which constantly is breaking U-joints what I'm trying to eliminate the rear end from rotating 45 degrees up and 45 degrees down could you help me out what can I do to fix my rear end from rotating
looking at this 85 regal 2 cce pumps 6 batteries and 4 switches.. all I care about is fbcc not fbss im trying to avoid the third pump is there a way to convert?
Fwd's are never a good choice to juice up. It can be done but usually a lot more work involved and sometimes more expensive. Most Fwd's require you to use mini coils which don't ride very well. Also most fwd's can't handle the abuse from hydros. My opinion 2 choices: 1 just do airbags or 2 scoop up a rwd car
I have a fleetwood i did 3 pump set up 4 switches , 2 six sprong front and back and 2 three sprong for each corner i still can get the back pumps to lock up but not together only when i drop it should i switch the 3 sprong first then the 6 sprong ?
im getting an 84 regal and it has a whammy pump but no reinforcements i was wondering how much do you think you can estimate it to be for reinforcements and chain bridge to get done at a shop. thanks
reinforcement on the frame helps with that. and some cars are a little stronger then others g body's seem to be the worst. fiberglassing would help for sure but proper frame work is the answer to maintain the cars structure
ese tabajo lo puedo hacer en mi chevy s10 para k haga 3 weel tengo 3 pompas y 8 baterias con cilindros de 18" traseros no tengo nada de contrapeso solo el equipo
I got a caprice it has the chains the bridge and rearend reinforced and I’m running 16s in the rear but when I try to power 3 it’s on getting like 6” off the ground and it’s on got nine links on the chain should I length it to the 15 links and try it or shorten them but I don’t want to always be changing the lengths to ride and to three
Yo guys, I bought a '64 Impala recently and didn't realize but the frame is bent on it, so I got a new one, blasted and coated it so its like new and I'm having it installed soon, if I were to put hydros in tho, I'm worried I could bend the expensive/rare ass frame lol. Should I get hydros or just get some nice chromed out 22's?
Hey I have a serious question. I have a 79 cadillace eldoroado fwd it has the stock air bags on the rear suspension. I want to convert it to hydraulics. But I really dont know if its possible or rather how difficult it would be and how good fwd cars and hydraulics go together
Sorry but I don't know any way that could be done. problem with fwd cars is the cylinder has to replace the strut. that's why most juiced fwd cars have cylinders inverted on front and run mini coils. besides uni bodies are not structurally strong id be afraid to hop it myself.
I've never done this an have always hit an easy standing 3 wheel. As long as you have a high lockup, lay pretty low and have more than a pansy setup with less than 8 batteries all this nonsense isn't needed lol.
![АЛАУДИНОВ у Скабеевой: эти их ВСУ нас НЕ ДОГОНЯТ 😁 [Пародия]](http://i.ytimg.com/vi/an0anqU4WGQ/mqdefault.jpg)
Most informed and details description of this online hands down. I appreciate the white board explanation as well over a in car demo as the theory is much more concrete
You can run 2 pumps and have a power 3.....1 pump for the front and 1 for the rear...BUT with 4 dumps. 6 dumps total ....It works but it's mainly for import setups. I did a 1 pump 12 switch setup back in the 90s it worked great with accumulators on a
Yeah using a dump as a block off. I've also done that back in the day. It stays open so you wire it to shut off when you hit the switch.
Have a 2 pump set up was wondering if you a diagram on how to set up the dumps for 3 wheel would really appreciate it
I truly appreciate your videos!!! They are very informative and detailed. Please keep up the good work!!!
Thanks. I been around it along time and all hands on. I've learned the hard way and got to where I'm at now with cars. Having a dependable lowrider is what its about. I don't know everything and theres all kinda ways to do stuff I just share what I can and hope it helps.
excellent video.. i am those people who loves lowrider but don't know a lot of stuffs
Your welcome, if your looking to do suspension work on the eldo I deff would consider airbags. You can get direct bolt in kits pretty cheap. Bags may not be what your looking for but if you did juice it it'll pretty much be "lay & play" anyways so you could get the same from bags. Just a thought
thanks for posting this video.it is so easy to understand when you explain it.
you can threel with with 2 pumps . lock up front and back drop a side and tap up the front and then give it gas and turn
Can't believe nobody corrected your thought in 6 years. Yes we know how 3 wheel works.
A bridge and 3 pump setup allows standing 3 wheel without being in motion. In a g-body you can add sand bags or find a couple hundred pound friend to sit on a corner.
1st things 1st. You will not be able to use a chain bridge for power 3 wheel without a 3rd pump. As far as reinforcing goes thats hard to say. People charge different prices and also the extent of reinforcement being done. Stress points to minor plated to full frame boxing all carry its on price for a bridge plating the frame arches and reinforcing the rearend are pretty much necessary. All that plus a bridge maybe 6-800. Shop around and make sure whoever does it knows what their doing. Will be bad if done half ass when something breaks.
Thanks for the information
Yea I mainly just wanted to be able to hit threewheel and raise it up not nessecarily hop it. I have a 80 monte carlo thats primerd out and gutted but its got most of the stuff for hydros already. Was parted out before I got it but I got it for cheap lol jusy needs battereys and pumps maybe a better choice in the end huh lol thanks man helped a bunch if I have any other questions i know where to go !
well thats one way to explain it alto i dont think its totaly accurate. the car 3 wheels so easy because the chains move the piviot point from the cylinder and power ball to the chain more inboard on the body and axle making it easier to tip over. if it was just picking up the front end like in the scenario with the Jack like you said that all cars equpied with chains could 3 wheel and they cant. hoppers use chains parallel to the rear cylinder to compress the spring before hopping but they don't three-wheel very well because you're not moving the Pivot Point like you would have to chain was in the middle
Great explanation
When running the 14 inch cylinders to the rear will you have to modify the trailing arms?
wow i learned something new today
getting ready to try the single chain in the center
Watch your video took notes .. thank you
Thanks alot man im sure glad I found yur channel lol!
more videos please. they very helpful
yes my comment is I have 16 inch cylinders in the back and my rear end when it's all the way down till it's up 45° and when it's all the way up until it's now 45 degrees which constantly is breaking U-joints what I'm trying to eliminate the rear end from rotating 45 degrees up and 45 degrees down could you help me out what can I do to fix my rear end from rotating
Great instructional video nice art work lol
looking at this 85 regal 2 cce pumps 6 batteries and 4 switches.. all I care about is fbcc not fbss im trying to avoid the third pump is there a way to convert?
Keep those vid coming .
This might be a old video but I have a question !!
First time here I have a 50 deluxe and just need up and down motion do you have a tutorial I want to run 2 pumps three batteries
great video👍
Fwd's are never a good choice to juice up. It can be done but usually a lot more work involved and sometimes more expensive. Most Fwd's require you to use mini coils which don't ride very well. Also most fwd's can't handle the abuse from hydros. My opinion 2 choices: 1 just do airbags or 2 scoop up a rwd car
I have a fleetwood i did 3 pump set up 4 switches , 2 six sprong front and back and 2 three sprong for each corner i still can get the back pumps to lock up but not together only when i drop it should i switch the 3 sprong first then the 6 sprong ?
im getting an 84 regal and it has a whammy pump but no reinforcements i was wondering how much do you think you can estimate it to be for reinforcements and chain bridge to get done at a shop. thanks
Wouldn’t you need to fiber glass the rear quarter panels too so they don’t buckle from too much 3 wheeling
reinforcement on the frame helps with that. and some cars are a little stronger then others g body's seem to be the worst. fiberglassing would help for sure but proper frame work is the answer to maintain the cars structure
ese tabajo lo puedo hacer en mi chevy s10 para k haga 3 weel tengo 3 pompas y 8 baterias con cilindros de 18" traseros no tengo nada de contrapeso solo el equipo
I got a caprice it has the chains the bridge and rearend reinforced and I’m running 16s in the rear but when I try to power 3 it’s on getting like 6” off the ground and it’s on got nine links on the chain should I length it to the 15 links and try it or shorten them but I don’t want to always be changing the lengths to ride and to three
hi am using a pro Hoppos hydraulics on my 1998 Honda civic the front can u show me how to install with springs to make it hop
Sheldon Regis u cant hop it, its fwd
What size of metal to reinforce the rear end arches
Yo guys, I bought a '64 Impala recently and didn't realize but the frame is bent on it, so I got a new one, blasted and coated it so its like new and I'm having it installed soon, if I were to put hydros in tho, I'm worried I could bend the expensive/rare ass frame lol. Should I get hydros or just get some nice chromed out 22's?
can i still put in a chain bridge with a two pump, 6 batt set up
Hey I have a serious question. I have a 79 cadillace eldoroado fwd it has the stock air bags on the rear suspension. I want to convert it to hydraulics. But I really dont know if its possible or rather how difficult it would be and how good fwd cars and hydraulics go together
Keep them vids comn.....
Sorry but I don't know any way that could be done. problem with fwd cars is the cylinder has to replace the strut. that's why most juiced fwd cars have cylinders inverted on front and run mini coils. besides uni bodies are not structurally strong id be afraid to hop it myself.
brad what bout the trailing arms do you have to extend those???
Jose Doe if you want a bigger lock up and 3 wheel
Do you recommend to reinforce the whole car frame?
Always
sup on some more videos homie
.
My truck has 2 pumps and 3 wheels all day
ROADHOUSE!!!!!
I've seen three wheels lock up with no chains
I've never done this an have always hit an easy standing 3 wheel. As long as you have a high lockup, lay pretty low and have more than a pansy setup with less than 8 batteries all this nonsense isn't needed lol.