Ingenious Extreme Production of Huge Industrial Gear with Limited Tools | Largest Industrial Gear

Ingenious Extreme Production of Huge Industrial Gear with Limited Tools | Largest Industrial Gear
Gears can be manufactured by a variety of processes, including casting, forging, extrusion, powder metallurgy, and blanking. Of these, machining is the most common manufacturing method used. Gear machining is further classified into two categories: gear generating and gear form-cutting.
Gear broaching, machining, and hobbing are three of the most common gear manufacturing methods. Looking in detail at these types of gear manufacturing methods to get a good look at everything that goes into the production and manufacturing of gears.
There's an endless number of different materials that can be used to create gears, but as a general rule, cast iron, steel, brass, bronze and plastic are the most common materials used for gears with cut teeth.
#gearmanufacturing
#largestgear
#biggearmaking
#makinggear
#largegear
#wonderingskills

[@NapierNimbus]

Liked all of this video. The cold rolling at start was so worried the flapping of his tunic would get caught in the exposed drive belts of neighbouring machine

[@mtang65]

I’ve been watching these videos from this part of the world and the first time I’ve seen a guy wearing pants, button up shirts, shoes and using gloves. Did he got transported from somewhere else?

[@victorcortes5960]

He should not be wearing long and loose clothes. Fatal May happen. Be very careful.REGARDS

[@wonderingskills1]

Thank You

[@ДмитрийЕременко-к2й]

Все могут.Завернули в кольцо такой толстый кусок металла.Молодцы.

[@kiloampere6228]

17:25. удар в пиноль задней бабки, который вы вырезали, осторожнее станок ваш кормилец!

[@ashokkumarnarayan1924]

I would like to see them harden the gear and perform profile grinding.

[@felixacuna4139]

Como es posible que trabajen en estas condiciones, trabajo totalmente inseguro, comenzando por el taller desorden, insalubre, ropa inadecuado para este tipo de trabajo, sin zapatos de seguridad, sin guantes de seguridad, sin cascos, no hay zonas de marcadas por donde caminar, horrible

[@georgk4207]

Error after error correction not build-up slow not x-rayed no annealing after welding and the pre-turned parts without safely without wood / rubber transport😵yes then the module milling went from 2 work steps first pre-milling and second finishing milling and before clamping is roughly deburred so that all fingers stay on it. I don't know as a customer I would go and look for a higher quality manufacturer

[@dagobertoandrade9636]

Brutal trabajo, felicidades por es ardua labor Dios les bendiga

[@Jurek-xe3tr]

Czy oni kiedykolwiek zmodernizują ten park maszynowy? Czy bedą to naprawiać spawarka i młotkiem?

[@JayeshbhaiNayak-uo8mg]

Lath machine is a veryold but proofabal thanks ❤

[@wonderingskills1]

Thanks

[@CreativeTalent1]

Thank you dear for sharing this type of stuff ❤

[@wonderingskills1]

Welcome dear💙

[@hermanschijf21]

Oke

[@adybarker4733]

11:15 I see a lot of this upward cutting on lathes in these vids. It's totally wrong to do that, the forces should be directed down into the bed, not away from it.

[@1994fergo]

There so worn that cutting the traditional way sucks the tool into the work but going the otherway force the tool away from the work. It works for light cuts

[@HSKAYU]

Salam woodworking Indonesian

[@wonderingskills1]

Waalaikumussalam

[@HSKAYU]

@@wonderingskills1 semoga sehat dan sukses selalu

[@luanferreira-nh2em]

Sensacional gostei de mais valeu👍👏

[@wonderingskills1]

Thank You

[@СергейНиколаевич-б7х]

Покажите ролик ВВП , пожалуйста . Он может поймёт каких " незаменимых специалистов " можно интегрировать в России ?

[@ronaldsmith4153]

Welcome to our modern production facility.

[@wonderingskills1]

Thank You

[@Clarity5970]

CNC gear grinder

[@YaqootKhan-v6l]

Every part of this video is amazing.❤

[@wonderingskills1]

Thank You dear