COMPLETE Audi A6 Detail Start to Finish | Audi A6 S Line
Вставка
- Опубліковано 23 чер 2021
- Deep Cleaning of Audi A6 from Start to Finish. 20 hours of work in total and combined in one 25 minute video. I have tried to include as much content as i could showing all techniques and providing product list below. So this video can not only be enjoyed as ASRM, but can be used as HOW TO.
Facebook: / akthedevilisinthedetail
1.Bilt Hamber Touchless 4% PIR
2.Bilt Hamber Surfex HD 1:10
3.Bilt Hamber Auto Wash 1:2000
4.Bilt Hamber Korrosol / Iron Particles Remover
5.Bilt Hamber Clay Bar
6.Gyeon Q2R Glass Cleaner
7.Rupes Coarse and Fine Polishing Compound
8.Bilt Hamber Auto Wheel
9.Soft99 Tire Wax
10.CarPro Perl 1:1
11.Auto Finesse Hide
#cardetailing #carcleaning #completedetailing
Love it ignore the people that hate your content amazing keep it up!!
Отличная работа ! Какая услада для глаз ✨👍
Awesome! That was so amazing and I love it man,
Keep it up♥️
I am like #300. It's the little things in life. 😁
really great mate loved so much the extractions make more
Absolutely great work. I use pretty much the same chemicals as you are in this video and the same dilution rates too. Although I’ve not yet tried pearl, I’m planning on getting some once my usual stock runs out.
I’m not a pro per se, just a weekend warrior as they call us! But i do own the same car you’re detailing in this. But mines a black avant. Keep up the great work
Hi James, i am also a warrior : ) everything i have done was for free as i enjoy doing this both detailing and filming. I am thinking to diverse the channel a little bit and trying something else , which is very likely be a restoration project. All the best !
Excellent!!!
Nice work!
Are you from denmark or from england? I love your videos. I have only one suggestion: I would first pressure wash the rims before cleaning with a brush or a wash mid / sponge. Best wishes and regards from germany.
Hi Heiko, i am 50/50 currently with a plan to move to Denmark permanently. Your suggestion is 100 percent legit and i absolutely agree with. I think i was doing i the way i do to make a better picture : )
Just a tip put your polisher cable over your shoulders so the cable doesnt scratch your paint work you just polishef
Thanks George!
Great video mate ive subbed
Really really good job i have exact car.. its hard to keep it clean
Very good vids, looks very experienced. Surprised you don't have more subscribers. Maybe add the products being used on the screen as you go through. Cheers.
Thanks 🙏
I had no idea you could powerwash under the bonnet.
Why do you scrub the dirt into the paint with the brush? this causes unnecessary scratches on the paintwork.
Please be more specific, where do i scrub the dirt into the paint ? you can leave time, so we can discuss
@AK Detailing from 0:50 to 1:25 you Take the dirt with your Brush and Made scratches Into the Paint
Ok i see what you mean. When i apply Bilt Hamber Touchless pre wash foam i use a SOFT bristle detailing brush mostly to loosen dried insects on side mirrors or grill and remove dirt from tight spots like badges and fuelling cap. I don’t use it anywhere else and it doesn’t make scratches. I do have brushes with medium bristles, i don’t use them for this exercise, as they will likely do some harm as what you say, but this one is very gentle. Good luck
@@AKGaragezz I've tried very often to remove the dirt with a very fine brush in conjunction with Snowfoam. until now, microscratches were always visible afterwards with my scangrip
@@AKGaragezz you should steam clean off first bugs will mostly come off with a steam clean then when you have steam cleaned use an apc with a brush to listen any dirt then steam again
Great work looks new, except those Nankang tires...what in Gods name...
Great video. Just to clarify, did you use Rupes D-A course compound with blue pad and then D-a fine with yellow pad? How does this combo deal with Audi hard paint?
Hi Юрий, all correct apart from i use UNO Protect with a yellow pad instead of D-A Fine. I do have D-A Fine, but i fell in love with UNO as its really nice to work with, easy to wipe off and it leaves hydrophobic layer that everybody likes. I went through different combinations and found that Da Coarse + FOAM pad ( blue ) and Uno Protect + FOAM pad ( yellow ) is all i need. Good Luck
Love your channel feels so good to see from start to finish! Question for you, what is the best way to clean the under carriage I had a big oil leak for years and recently had it repaired. The mechanic didn't really clean the excess oil and I've been afraid to damage any electrical components by pressure washing it, is it ok to pressure wash? what should i use to remove the old oil gunk? thank you!!
Hey Manny, alternator is the only thing you need to protect if it is located at the bottom. Foam engine degreaser spray will work great. Leave it to soak and then wash with jet wash. Repeat. Good luck
Nice. But high pressure water and degrease on that brick wall? 🤔
9:56 do you remove the tape residue from the old wheel weights when detailing? If so, what do you use? It's always a pain for me, even Citrol and Goof Off doesn't seem to touch the stuff. One of the most time consuming part of an auto detail for me. With removal and ceramic coat (2 coats) it's 2 1/2 -3 hours a wheel.
Hey. Yes it is still a problem for me. I use bilt hamber cleanser fluid. But it is not a miracle for this glue. What i did was sprayed and left i to soak , then sprayed with jet wash very close to the glue and it has removed half of it. Then repeat until it is clean.
What vacuum are you using? Great content btw!
Hey Coralis, Bissell MultiClean Wet and Dry as a vacuum cleaner and Bissell Spot Clean as Extractor. Both great machines. Thanks !
What kind of APC, plastic protectant, leather cleaner and conditioner are you using?
Hi Bobby, Bilt Hamber Surfex HD, CarPro Perl and Auto Finesse Hide. I have listed all products in a description. Good Luck
Do you think disconnect the battery is a must for detailing the engine bay?
Hi Tony, in my case battery is located in the trunk, but if it is in the engine bay absolutely no need to do that, just control the jet wash, rinse from the distance and all will be good. Cheers
No claybar? Also did you use Trix or something similar?
Hi, i did use clay bar. I think on 3:12 you can see it briefly. To remove iron particles i use Bilt Hamber Korrosol, very happy how it performs and can definitely recommend. I have listed all products in video description. Good luck.
@@AKGaragezz thanks - if any detailer buffs my car without clay bar it will be WW3. You have any idea on clay mitts? Worth the hype?
I am planning to try when i will ran out of clay. Have 2 bars still in stock. My friend uses mitt and he likes it. I personally like to try out myself and make verdict, as i went through different products and only use that performs well, gentle on paint, and cost effective, there is loads of junk on a market.
@@AKGaragezz thanks - waiting for it. I am eager because I was reading in autogeek that it’s washable
Whats in the first spray you use?
Bilt Hamber Surfex HD 😃
@@AKGaragezz thanks. What ratio?
1:10 mate
How many hours for a detail like this ?
About 20 hours 😃
@@AKGaragezz
It's a "complete package" , and how much do you charge for it ?
Are u using bissell extractor?
Yes, SpotClean Pro
@@AKGaragezz I just bought him, and trigger for water worked 30 Minute and now it s not working, it s not spraying. I m disapointed to be honest
I think it’s biggest advantage is that it is small. There are many alternatives which are better.
@@AKGaragezz they use 25 A fuse, and thermo giver is 10 A, if you understand, and it s should be oposite, thermo giver died in my biss ell instead fuse. Fuse is there to protect thermo giver and pump, but in this case He is 25 A. Fucking bissell idiots.
wow can’t believe. will check mine as in UK all mains plugs see fitted with 13 amp fuse. 25 sounds not right
you work is haotic first you make car and then engin its not make sens and you spent time two times for drying car and clean up meess men also electric cable when you polish touch paint you need to put cable on you back
get better angles for extractions u zoom in 2much
you are absolutely right, will do better next video 😁
Acondicionando el neumático por la cara interna... Wtf
why didn't you clean the engine bay before you dried and polished the car? you are just spraying all that dirt back on to the clean car... Also work from the top down and don't clean the bottom of the car and then bring the wash mitt back to the top quarter, or you will just end up with scratches!
You are right! I think first he can clean the engine bay, then wash the car and last he can finish polishing!
@@aerdrushiti173 Hey , i did exactly this 😄 I have just placed exterior clean as first in a video. God bless people who think i cleaned engine bay after exterior 😄
What is the brand of the towel?
Auto Glanz Double Twist Microfiber Håndklæde (90x60 cm) (1200 GSM) , bought at carcarefreaks
everything ok, just change the music its awful