Yes I am watching! 302 Chevrolet or 327 Chevrolet will be perfectly acceptable alternatives. Short stroked, over square, over cammed and over carbureted!!! Old skool over the top Bud!!! Seriously any direction you decide is going to be great! Glad to see a fresh video. Looking forward to seeing those front and rear modifications!
Such a fun build, loved being apart of it when I could. Turned out way better then I first thought it would. Proud of the hard work and dedication it took to get this to the state its in!
1:33 I thought you said “my dad’s brother and I” 🙈🤔🙈 You actually said “my dad, brother, and I” 😉 Sorry for the mistake but everyone involved did a spectacular job!!! 🎊 🎊 🎊 🙌🏾 🎊 🎊 🎊
Mine set on top of the fram bought some 2"lowering spindels and my tires are low profile tires.even after lowering it will look like a gamer my have to get taller tires put same blazer gas tank like you did.
Ben working on building a lover shade for the back glass.ishort of got one of those 30 30 350 motors don't know if it will run 30 seconds or 30 feet.but glad to see your new video.
My dad had a Corvair. He said it was the biggest pile of junk he ever owned. He said ya practically had to pull the engine to change the spark plugs. He also said the engine fell out of it going down the road.....motor mounts rusted thru.
think they have ls1 conversion kits for the s10 frame a LS1 4.8 and 5.3 liter would already be a handfull for the weight of car youre having and shouldnt cost all that much (people want the bigger 6.0 ones) , can put the 4L60E in it too and have 4 gears and a little better milage and the 5.3 can make awesome power with junkyard parts and a turbo , its been done a gazillion times allready the V5 from the s10 / camaro isnt a bad engine either , if you just want only a little more oompf in youre daily driver that could be an option , might fit a little better and have less heat issues too , a turboed honda 4 cilinder from a rear wheel drive would be a nice powerhouse too
There is so many engine swaps that I have considered including an LS and a Honda engine making it rear wheel drive. I’ve even really considered putting in a 283 SBC and having fun with that. But I have ultimately decided that I am going to be swapping in a Pontiac 3.8 L supercharged from a front wheel drive car. I have a rear wheel drive transmission that will bolt right up to it. Other people have done similar swaps in their S tens and they love them.
@@pissedoffpistongarage might need to change the oilpan some or see if you can find one that fit it as a rwd engine might be the realy early v sixes have the same basic block and a pan with pickup from one of those might fit the supercharged one might need a few other things like a thermostad housing and hoses as the engine will be rotated a quarter turn
@@watahyahknow yeah I know. I’m going to go with a fourth GEN Camaro V6 oil pan. There’s a lot of parts that I am going to have to order. But I am talking to a guy who successfully swapped his in less than 60 days. It’s going to be a big project but I’m all for it!
@@pissedoffpistongarage might want to look intoo the whole fourth gen camaro as a donor aspecially if it comes with the fuelinjection gearbox / automatic headers exhaust front accesorydrive startermotor and all the little stuff you need to convert the fwd motor to rwd ,you might even need to use the whole engine wiring loom of that i done a conversion on 'a" car from a 1.6 to a 2.0 injection , they where both front wheel drive cars of the same brand and type so it wasnt as hard as swappin g bodies or putting in a fwd engine in a rwd casr , everything crossed over from a standard to a stationwagon too , a lot of fun actually figuring out wat to use from wat car to make things work i missed the inlet duct ,as the guy i bought the donor from used an aftermarket cone filter and messed up the maf sensor , since it was sumting unusual i had to buy a lot of the parts new at the dealer and the total cost of the inlet ducting added together was as mush as the purchase price of the donor vehicle i used for the engine and interior (have to say though that cars in the netherlands are a LOT cheaper , like 250 to 800 euro for a 15 year old running car cheap )
@@pissedoffpistongarage I would have my hopes up for sure. I have a 1998 Isuzu Hombre 2.2L that I'd like to add some umph to. I was checking out the AMR300 supercharger, a Torqamp, or a Turbo but I'd like to see what steps are needed to have it set up to run reliably.
@@FAITHFreedomFirearms I think I averaged right about 26? There is a lot of rolling hills where I live. When I added the turbo that dropped down to about 21
I Own a 65 corvair I would like to talk to for advice . The only thing I find a blazer 4 door 1997 . Like the one I saw on the video. If u can help me answer some question and direct me in the right direction.aprrciated if u can help.
Excellent project I like the look and I like to dependability is that a 5-speed or an automatic? Did you keep the ac? And thank you so much for doing it if I get my health back in order this is what I wanted to build I want to build something that just looks good does its job but doesn't look like a showroom trailer Queen. Thank you and best regards, Bob from Virginia USA
Thank you for the kind words Bob! These are definitely my favorite comments to read. To answer your questions, I went with the five speed of course. I love driving manuals and could never live with myself if I put an automatic in it. I deleted the AC for two reasons though. The main reason was I am going to be turboing it very soon. As a matter fact I am finishing up buying the stuff I need this week. And because of the turbo location I had to delete the AC compressor. Not to mention my AC didn’t really work to begin with. I know I could’ve put some money into it and made it work but it wasn’t worth it to me. Also, I forget what part of the AC system it is called but where it sits up against the firewall I believe it is called the condenser. Basically what makes the air pass-through the cool freon to make it cold if that makes any sense. That stuck way up past the towel of the Corvair. So I would not have been able to close my hood. You could in theory modify your hood to make it fit but it just wouldn’t look good in my opinion. I don’t think I ever addressed it in any of the videos however you might be able to see it in some of the videos right after I put the body on the frame. Actually, Watch my how to make a cowl induction hood. You can probably see it there. I hope that made some sense. Also recently I just ended up getting the last piece to the AC delete I needed which was a factory AC delete box on non-AC S 10s They are very hard to come by and when you do find them very expensive. I saw one on eBay going for $300. I lucked out like crazy and found one that my friend gave to me for free! So now when you open up the hood it looks like a factory AC delete s 10. Yes I will admit it gets a little hot but nothing some wing windows won’t help with. I hope your Health gets back so you can do a build like this as well! It’s a lot of fun! Nope it is not a garage kept show room trailer queen. I drive this thing rain or shine, night or day. And take it down gravel roads. I drive her hard and she takes every bit of it. Worth every headache and penny!
thank you so much! id hate to do this conversion and have to smog it, there is a guy in my area that has a couple corvairs he just wants off his property and I was wanting to do this swap
@@pissedoffpistongarage I’m seriously thinking about it, I’m just waiting for a response from the guy, and I’ve already found a couple s10 trucks that would make good donors!
Yes I am watching! 302 Chevrolet or 327 Chevrolet will be perfectly acceptable alternatives. Short stroked, over square, over cammed and over carbureted!!! Old skool over the top Bud!!! Seriously any direction you decide is going to be great! Glad to see a fresh video. Looking forward to seeing those front and rear modifications!
Such a fun build, loved being apart of it when I could. Turned out way better then I first thought it would. Proud of the hard work and dedication it took to get this to the state its in!
Thanks man! It wouldn’t have happened without your help!
1:33 I thought you said “my dad’s brother and I” 🙈🤔🙈
You actually said “my dad, brother, and I” 😉
Sorry for the mistake but everyone involved did a spectacular job!!!
🎊 🎊 🎊 🙌🏾 🎊 🎊 🎊
Gotta say…no small thing! Very cool project.
Very awesome dude. Love when someone saves an old classic with a modern chassis swap, especially a Corvair. Nice work!
Thank you! I couldn’t stand to see it sink in my backyard anymore and finally decided to do something with it!
I'm glad you're back.
I am putting a a 65 mustang on a 2000 Ford ranger. This helps me a little bit
Dude that’s awesome!! I thought about if I had a mustang I would do that. The wheelbase is is all the same too!
Glad to see your video .still working on mine every now and then.building a back window lover shade out of aluminum.
Mine set on top of the fram bought some 2"lowering spindels and my tires are low profile tires.even after lowering it will look like a gamer my have to get taller tires put same blazer gas tank like you did.
Awesome! Glad to hear you are still working on it! How close would you say you are to finishing it?
Don't know still got to rig a gas pedal gas and breaks
Ben working on building a lover shade for the back glass.ishort of got one of those 30 30 350 motors don't know if it will run 30 seconds or 30 feet.but glad to see your new video.
Great Job! Awesome project! Did you ever turbo the 2.2?
It’s happening soon! I’m finally going to buckle down and do it. I’m buying everything else I need this week!
Damn dude, that thing is truly 1 of 1
Thank you!
A 67 through 69 Camaro rear deck spoiler will fit the car like it was made for it😊
My dad had a Corvair. He said it was the biggest pile of junk he ever owned. He said ya practically had to pull the engine to change the spark plugs. He also said the engine fell out of it going down the road.....motor mounts rusted thru.
Not sure why you would have to drop the engine to change the the spark plugs but to each there own! Thankfully the rust on mine wasn’t to bad!
No you don’t the spark plugs are on top of engine learn about the car be for you talk bad
@@isaacdanielson7103 Read it again son. That's not what I said.
Love this car!
Thank you!!
I like this project a lot. I really want a 4x4 car and do not want a subaru, so a project like this but with a 4x4 truck would work great.
Four-door Chevy s10 blazer has the same wheelbase as a Corvair. I was actually going to use a blazer frame but decided against it.
Love that car 🚗
If you ever make it down to south central Tennessee, I will give you a set of rally wheels for it. Great Job!
I’m intrigued! Maybe someday!
i'm sensing an "uh-oh"
Nope! No uh-oh here!
think they have ls1 conversion kits for the s10 frame
a LS1 4.8 and 5.3 liter would already be a handfull for the weight of car youre having and shouldnt cost all that much (people want the bigger 6.0 ones) , can put the 4L60E in it too and have 4 gears and a little better milage and the 5.3 can make awesome power with junkyard parts and a turbo , its been done a gazillion times allready
the V5 from the s10 / camaro isnt a bad engine either , if you just want only a little more oompf in youre daily driver that could be an option , might fit a little better and have less heat issues too , a turboed honda 4 cilinder from a rear wheel drive would be a nice powerhouse too
There is so many engine swaps that I have considered including an LS and a Honda engine making it rear wheel drive. I’ve even really considered putting in a 283 SBC and having fun with that. But I have ultimately decided that I am going to be swapping in a Pontiac 3.8 L supercharged from a front wheel drive car. I have a rear wheel drive transmission that will bolt right up to it. Other people have done similar swaps in their S tens and they love them.
@@pissedoffpistongarage might need to change the oilpan some or see if you can find one that fit it as a rwd engine might be the realy early v sixes have the same basic block and a pan with pickup from one of those might fit the supercharged one
might need a few other things like a thermostad housing and hoses as the engine will be rotated a quarter turn
@@watahyahknow yeah I know. I’m going to go with a fourth GEN Camaro V6 oil pan. There’s a lot of parts that I am going to have to order. But I am talking to a guy who successfully swapped his in less than 60 days. It’s going to be a big project but I’m all for it!
@@pissedoffpistongarage might want to look intoo the whole fourth gen camaro as a donor aspecially if it comes with the fuelinjection gearbox / automatic headers exhaust front accesorydrive startermotor and all the little stuff you need to convert the fwd motor to rwd ,you might even need to use the whole engine wiring loom of that
i done a conversion on 'a" car from a 1.6 to a 2.0 injection , they where both front wheel drive cars of the same brand and type so it wasnt as hard as swappin g bodies or putting in a fwd engine in a rwd casr , everything crossed over from a standard to a stationwagon too , a lot of fun actually figuring out wat to use from wat car to make things work
i missed the inlet duct ,as the guy i bought the donor from used an aftermarket cone filter and messed up the maf sensor , since it was sumting unusual i had to buy a lot of the parts new at the dealer and the total cost of the inlet ducting added together was as mush as the purchase price of the donor vehicle i used for the engine and interior (have to say though that cars in the netherlands are a LOT cheaper , like 250 to 800 euro for a 15 year old running car cheap )
Do you think this set up would work with a convertible Corvair.
Without a doubt! You could use a car hoist to lift the body instead of a telehandler
Nice build dude! 🤘Looks awesome already but really looking forward to see how it will turn out with your updates!
Once again......
You and your uncle did a great job! 🎊🎊🎊
💯 😎 💯
That’s my dad but I’ll let him know! 😂😂
Awesome build and even better content
Thank you!!
Did you consider using a 1980s G.M. F body Regal Cutlass etc they have the correct wheelbase and track width?
I love this . I actually really like the truck bed in the trunk also.
Did you ever finish the Maxspeedingrods turbo?? I dont see a Pt. 2 Video...
Nope…😐 but would you believe me if I said I’m going to buy the rest of the stuff I need this week?
@@pissedoffpistongarage I would have my hopes up for sure.
I have a 1998 Isuzu Hombre 2.2L that I'd like to add some umph to. I was checking out the AMR300 supercharger, a Torqamp, or a Turbo but I'd like to see what steps are needed to have it set up to run reliably.
Awsome build. What kind of gas mileage do you get? 30 plus?
@@FAITHFreedomFirearms I think I averaged right about 26? There is a lot of rolling hills where I live. When I added the turbo that dropped down to about 21
@@pissedoffpistongarage Great series.
I Own a 65 corvair I would like to talk to for advice . The only thing I find a blazer 4 door 1997 . Like the one I saw on the video. If u can help me answer some question and direct me in the right direction.aprrciated if u can help.
Absolutely! What are your questions?
Very cool car. I always liked the Corvair, but am not a fan of the rear engine. Fun idea to put it on a front engine chassis!
Excellent project I like the look and I like to dependability is that a 5-speed or an automatic? Did you keep the ac? And thank you so much for doing it if I get my health back in order this is what I wanted to build I want to build something that just looks good does its job but doesn't look like a showroom trailer Queen. Thank you and best regards, Bob from Virginia USA
Thank you for the kind words Bob! These are definitely my favorite comments to read. To answer your questions, I went with the five speed of course. I love driving manuals and could never live with myself if I put an automatic in it. I deleted the AC for two reasons though. The main reason was I am going to be turboing it very soon. As a matter fact I am finishing up buying the stuff I need this week. And because of the turbo location I had to delete the AC compressor. Not to mention my AC didn’t really work to begin with. I know I could’ve put some money into it and made it work but it wasn’t worth it to me. Also, I forget what part of the AC system it is called but where it sits up against the firewall I believe it is called the condenser. Basically what makes the air pass-through the cool freon to make it cold if that makes any sense. That stuck way up past the towel of the Corvair. So I would not have been able to close my hood. You could in theory modify your hood to make it fit but it just wouldn’t look good in my opinion. I don’t think I ever addressed it in any of the videos however you might be able to see it in some of the videos right after I put the body on the frame. Actually, Watch my how to make a cowl induction hood. You can probably see it there. I hope that made some sense. Also recently I just ended up getting the last piece to the AC delete I needed which was a factory AC delete box on non-AC S 10s They are very hard to come by and when you do find them very expensive. I saw one on eBay going for $300. I lucked out like crazy and found one that my friend gave to me for free! So now when you open up the hood it looks like a factory AC delete s 10. Yes I will admit it gets a little hot but nothing some wing windows won’t help with. I hope your Health gets back so you can do a build like this as well! It’s a lot of fun! Nope it is not a garage kept show room trailer queen. I drive this thing rain or shine, night or day. And take it down gravel roads. I drive her hard and she takes every bit of it. Worth every headache and penny!
Все ли нормально с охлаждением? Ведь решетки спереди нет.
You still got ac and heat?
Heat. Yes. AC. No. I deleted it to fit the turbo
Did you cut your springs
Did you cut your front springs I put a two " lowering spindals on mine but haven't cot springs
is the car registered as an S10 or as a corvair?
Corvair. Vin number on the dash is a Corvair so it’s registered as a Corvair.
thank you so much! id hate to do this conversion and have to smog it, there is a guy in my area that has a couple corvairs he just wants off his property and I was wanting to do this swap
@@smacholibre3008 do it!!
@@pissedoffpistongarage I’m seriously thinking about it, I’m just waiting for a response from the guy, and I’ve already found a couple s10 trucks that would make good donors!
Glad to see your making new videos !!! I’d drive the shit out of that car !!!