Jennifer you are a gods send! I've been googling and watching so many videos but you have answered my questions in just a few min utes in this video. You also get right to the point and you seem to know all the answers to everything! I ❤ you Jennifer!!! 😂 You always answer everyones questions. For that we all thank you so much and it's truly appreciated! 😊
I want to try sublimation on tumblers, but for my first tumblers, I don’t want to spend too much. Any tips on where to get cheap sublimation tumblers to practice on?
Hi Jennifer. Thank you for your videos they help so much. Im also starting my t shirt business, I seem to run into some problems. I basically bought the equipment for the sublimation and today bought the cricut cutter. So my question is if I could cut my design and sublimate it.
Hi Jennifer, thank you for the video. I had a question regarding once you are done printing your image on sublimation paper and put back in the cricut when you prefer the Cricut to cut it what material do you select? (Maker3) Thank you.
Place your printed sublimation sheet on your blue LightGrip machine mat like it is on the screen prompt. Lay a clean piece of printer paper over the top and use a brayer to adhere it well. Then, load the mat with your printed sheet into the Cricut and press the flashing button to cut your design. Here is a tutorial for this. jennifermaker.com/sublimation-with-cricut/#:~:text=Place%20your%20printed%20sublimation%20sheet,button%20to%20cut%20your%20design.
Hi Jennifer First you are the best one on media to explain everything about sublimation I almost found all my answers before I start sublimation I hope you can help me with tow questions Num.1 is can I use epson l3150? Do you know if it would give me good resolution and saturated colours ? Num.2 can I print sublimation without cutter? Why should I cut the sublimation paper? If you mentioned any point just tell me where I would see it immediately Thank you so much
The L3150 prints at a high printing resolution of 5760 dpi, delivering exceptionally high quality prints for all your needs. You do not need a cutting machine to use sublimation. facebook.com/groups/sublimationmadeeasy
Hi Jennifer, I have a rap pattern that I will put around a cup printed on sublimation paper. I d like to write a little thank you on the rap with the sublimination pen. Do you have a video for that?
Hi Jennifer, I just purchased an Epson 2800 and have converted it. I have sublimation paper, etc. I found 2 designs on Design Space that I want to use and tried to do the same thing you did, but for some reason it doesn’t look right to “make it.” I’m very confused. I combined it, do I weld or anything else I need to do before making it? I’m not using Infusible ink sheets. TIA ❤
Hi jennifer, I am stuck, I have saved A sublimation print and cut. I am now ready to cut. Is there any way to bypass the sublimation part and get to the cutting?
If you already sent it to the printer beforehand and now just want to cut it, as long as the print has the 4 corner markings you can cut it with your Cricut. jennifermaker.com/how-to-use-printable-vinyl-with-cricut/
I have seen other videos saying Cricut Design space won't give you sharp colors compared to other programs. Have you seen this? Have you tried other programs and how do they compare to Design Space? Thank you.
@@JenniferMaker thanks for the reply. I actually forgot to add my printer to my computer 😂😂 once I did it I was good to go. After over an hour looking the issue up lol
Great video! I was wondering if someone can help me. Since this update v7.25.119, I have not been able to open Design Space on my laptop nor on my android phone. On my laptop, I click Sign In, and it keeps going back to Sign In with no option to enter my email or password. When I force reload or just reload, as I've seen instructed from some google searches, it does nothing and the sign in option is gone. I've uninstalled, re-started my laptop, re-installed, reset password, cleared cache, cleared data, cleared autofill password from google and samsung(phone). I'm at a loss. Haven't contacted support yet because I can just imagine that I'll be on hold forever, but if noone knows of a solution, I guess I'll have to.
Look at the system requirements from Cricut. You can find that here: help.cricut.com/hc/en-us/articles/360009556033-System-Requirements-Design-Space Otherwise you may have to contact Cricut customer support.
that depends on the heat press and what you are sublimating on. My group is very helpful. You can ask detailed questions in there. facebook.com/groups/sublimationmadeeasy
Jennifer you are a gods send! I've been googling and watching so many videos but you have answered my questions in just a few min utes in this video. You also get right to the point and you seem to know all the answers to everything! I ❤ you Jennifer!!! 😂 You always answer everyones questions. For that we all thank you so much and it's truly appreciated! 😊
I want to try sublimation on tumblers, but for my first tumblers, I don’t want to spend too much. Any tips on where to get cheap sublimation tumblers to practice on?
Thank you!
You bet!
Hi Jennifer. Thank you for your videos they help so much.
Im also starting my t shirt business, I seem to run into some problems. I basically bought the equipment for the sublimation and today bought the cricut cutter. So my question is if I could cut my design and sublimate it.
You can do it!🥰
Hi Jennifer, thank you for the video. I had a question regarding once you are done printing your image on sublimation paper and put back in the cricut when you prefer the Cricut to cut it what material do you select? (Maker3) Thank you.
Place your printed sublimation sheet on your blue LightGrip machine mat like it is on the screen prompt. Lay a clean piece of printer paper over the top and use a brayer to adhere it well. Then, load the mat with your printed sheet into the Cricut and press the flashing button to cut your design. Here is a tutorial for this. jennifermaker.com/sublimation-with-cricut/#:~:text=Place%20your%20printed%20sublimation%20sheet,button%20to%20cut%20your%20design.
Hi Jennifer
First you are the best one on media to explain everything about sublimation
I almost found all my answers before I start sublimation
I hope you can help me with tow questions
Num.1 is can I use epson l3150? Do you know if it would give me good resolution and saturated colours ?
Num.2 can I print sublimation without cutter? Why should I cut the sublimation paper?
If you mentioned any point just tell me where I would see it immediately
Thank you so much
The L3150 prints at a high printing resolution of 5760 dpi, delivering exceptionally high quality prints for all your needs. You do not need a cutting machine to use sublimation. facebook.com/groups/sublimationmadeeasy
@@JenniferMaker thank you
Hello Jennifer I was wondering if you did a sparrow bird in a layered colors
You can request that. jennifermaker.com/projectrequests/
Hi Jennifer, I have a rap pattern that I will put around a cup printed on sublimation paper.
I d like to write a little thank you on the rap with the sublimination pen. Do you have a video for that?
I do not but it will work if you use a dark sublimation pen on a lighter wrap.
@@JenniferMaker when i tried it, it cut the lettering i was hoping to have printed on the wrap... ;)
hi hennifer i want ask you if i can use infusible ink sheets to my hp printer inject normal and transfer it on t shirt....So it will work?
You do not need a printer to use infusible ink sheets. Here is a guide for you. jennifermaker.com/cricut-infusible-ink/
I a solution love this idea
Thank you!
Hi Jennifer, I just purchased an Epson 2800 and have converted it. I have sublimation paper, etc. I found 2 designs on Design Space that I want to use and tried to do the same thing you did, but for some reason it doesn’t look right to “make it.” I’m very confused. I combined it, do I weld or anything else I need to do before making it? I’m not using Infusible ink sheets. TIA ❤
You can ask in the group for help and show photos. I cannot see what you are talking about here. facebook.com/groups/sublimationmadeeasy
Hi jennifer, I am stuck, I have saved A sublimation print and cut. I am now ready to cut. Is there any way to bypass the sublimation part and get to the cutting?
If you already sent it to the printer beforehand and now just want to cut it, as long as the print has the 4 corner markings you can cut it with your Cricut. jennifermaker.com/how-to-use-printable-vinyl-with-cricut/
I have seen other videos saying Cricut Design space won't give you sharp colors compared to other programs. Have you seen this? Have you tried other programs and how do they compare to Design Space? Thank you.
Printing thru Design Space is just the same because you're using the print dialog settings.
Thank you@@JenniferMaker
if i have my printer set to mirror do i also set mirror on design space
No, but double check the image in Design Space.
Hi I’m joining
Welcome! 😃❤️
I need help pls!!!! I got a new printer which is epson 15000 and I went to print on design space but the printer doesn't pop up. how can I fix this
You have to install the drivers for your printer🥰
@@JenniferMaker thanks for the reply. I actually forgot to add my printer to my computer 😂😂 once I did it I was good to go. After over an hour looking the issue up lol
Great video!
I was wondering if someone can help me. Since this update v7.25.119, I have not been able to open Design Space on my laptop nor on my android phone. On my laptop, I click Sign In, and it keeps going back to Sign In with no option to enter my email or password. When I force reload or just reload, as I've seen instructed from some google searches, it does nothing and the sign in option is gone. I've uninstalled, re-started my laptop, re-installed, reset password, cleared cache, cleared data, cleared autofill password from google and samsung(phone). I'm at a loss. Haven't contacted support yet because I can just imagine that I'll be on hold forever, but if noone knows of a solution, I guess I'll have to.
Look at the system requirements from Cricut. You can find that here: help.cricut.com/hc/en-us/articles/360009556033-System-Requirements-Design-Space Otherwise you may have to contact Cricut customer support.
@Jennifer Maker Thanks for the reply, Jennifer! My laptop and phone meet the requirements. I just need to call them I guess.
Jennifer this is Melinda Reece how many minutes pen gear sublimation on my shirt on my heat press please write me back love you bunches ❤
that depends on the heat press and what you are sublimating on. My group is very helpful. You can ask detailed questions in there. facebook.com/groups/sublimationmadeeasy
Hello
Hello!