2021 Yamaha MT-09 New Grip Install
Вставка
- Опубліковано 5 сер 2024
- In this video I remove the factory OEM bar grips and replace them with new DRIVEN RACING D-AXIS GRIPS!
I Love these grips, I have them on the 2018 R1 and now the new 2021 MT09.
Super simple to install, just need a little muscle to slide them on after you put the Grip Glue.
Driven Grip link
www.revzilla.com/motorcycle/d...
Grip Glue Link
www.cyclegear.com/accessories... - Фільми й анімація
Florida heat ain't no joke!! Lol awesome videos man!! I'm buying a mt09 thanks to your video reviews!
Congratulations!!! Ride safe and thank you for watching the channel 🙏
Hello my friend. I put the driven grips on yesterday. They look awesome. I had problems with the throttle side. I just couldn't get it on. I put the glue in the grip, but a light spray of WD 40 on the throttle did the trick. I couldn't get it on there without it. I checked it real good. Its tight. I let it set all day yesterday in 92 degree heat. Thank you for the video. Big difference too me.
Ya the throttle side was tuff! But the end result is that with the driven grips it looks good! Thank you for the feedback and for watching the channel. Ride safe!
@@yamayari8351 TY
Cool. Thanks for the vid. Been thinking about getting more comfortable grips. Nice to see it's pretty straight forward. Last time I changed grips was on my 99 Vstar1100. It was a pain! Getting that cable right. Ugh. 👍
Your welcome, I’ve used these for two years, really nice feel and look great ❤️
I just ordered them. They look great Thanks. I have the same bike. Its a beast.
Nice!!!! They are great grips, you will love them. Thank you for watching the Channel 🙏 ride safe.
Been following since you got your 09! I got the tech black, just don't have the extra $ yet to get an exhaust, but it's already available haha.
It's good to see your 09 progressing man, enjoy it!
Thank you bro! Means a lot. This build and start of the channel has been really fun. So I’m happy it’s been working out and good people like you are enjoying the channel. Thank you again.
@@yamayari8351 no worries, appreciate all the hard work you've done on your vids! Keep it up!
I’m definitely going to get a set of those driven grips. I have a set on the CBR and I need a set for the ZX10R. I use hairspray though, helps with sliding it on.
Ya man! Hair spray works out well. They are nice ❤️
Very nice locking good job
Thank you 🙏
Thanks man!
Good job. 👌🏻
Novice at work apparently. Huge TIP for you next time- soak a tiny screwdriver with isopropyl alcohol and rub under the grip. It will come right off no matter if it’s glued on. I’ve done thousands this way. Finally, you don’t need any grip glue. Install with alcohol also. It evaporates and then your grips are dry and solid.
Well if you have a video to share on your channel I’d like to see. Thanks for the constructive criticism.
No video or channel. It’s called common sense bud.
@@tg8150 Makes me happy that you appreciate my efforts and hard work. Not everyone is as talented as you. Maybe one day I’ll be at your level. Thank you for the advice, blessings.
I did find it was about an 1/8 shorter then the stock. I had to set the difference between the ends.
Hair spray works simpler.
GOOD BRO 👌👍🙏😊☺️🤗
Thank you 🙏
@@yamayari8351 Sama2 Bro 🤗
what are those mirrors and what adapters are those so they fit in the OEM bar?
Those are the arrow CRG mirrors and the graves bar and adapters. I have a video on my channel regarding the parts installation. Thanks for checking out the channel.
If you wear gloves (leather) the grip level increases, I know this after almost binning coz my gloves got a grip of the throttle when I didn't want them to.
Definitely, these Alpine Star gloves are leather and composite. So to your point they have better grip.
Hey Yama, I looked at the Graves bar end adapters at the Cycle City website link from your top 10 video and they show them for the R1/R6. I sent them an email and asked if they would fit the 2021 MT-09 and they said they could not confirm. Can you confirm? Yours look different in this grip install video so I'm wondering if you have the same ones. Many thanks for your videos and and info!
Ok glad to help. Just Order the adapters for a Yamaha R1 2018 and they will fit the 2021-22 Yamaha MT09 with no problem.
How well do they work with bar end mirrors?
Should be fine. Same length as the stock grips :)
I need some sp bars and do this install
Cooool
🙏
Have you tried using air from a compressor? Swells grip up a little and grip comes off easier. Keep up the great work!
I’ve seen it. But need a compressor for sure. Thank you for watching an the great advice. I appreciate you.
What is the brand of your side mirror sir?
@@marlonarellano9574 CRG Arrow bar end mirrors 😎
Rubbing alcohol is your friend for removal and install. Thought everyone knew this?🤷🏻♂️
Hi!
Can you tell me why others say I cannot use any grips and what I do have to care about when they are these special? Ride by Wires?
You can use any grips that fit the 2015 an up R1, R6 or MT09. There are plenty of options.
@@yamayari8351 sorry to bother but why does it say n o t compatible with ride by wire?
Don’t we have ride by wire?
@@chr6150 we do. But some ride by wire throttle tubes are bigger. But for our bikes it’s compatible:) thank you for watching the Channel.
Thank you ! Great Channel
Where did you get the bar ends from
Www.tstindustries.com. Just search you make model and year :)
Hi from Malaysia. Wondering the purpose of glue, i think the grip is good enough to have all the friction? My way to install the new grip is put some soap water inside the grip. Maybe I am wrong.
Glue makes it stick better. Soap and water is ok. But actually hairspray works as well. But in the heat, soap and water will slip. So I prefer the glue.
Glue is very unnecessary.
@@tg8150 I’m OCD, Yamaha puts grip glue, I’m a follow an do the same. But hey, if you like no glue then I’m ok with your choice. It’s your bike :) thanks for watching the channel. Means a lot.
@@yamayari8351 I'm CDO, which is just like being OCD, except, the letters are in Alphabetical order, as they should be!!
@@Rabessey well played friend. Well played.
Here is a tip instead of glue : hairspray works just as good and slides right on..
Thank you. I’ll try that next time. Thanks for watching.