Very informative video , regardless if you're installing TST products or not. Thank you TST for all your "install videos" they really do help out. Love your products. Keep it up.
@@madsoothsayer around the 39:50 mark of this video we show options for connecting a running light on them or an active brake light. ua-cam.com/video/tgYgrV0EyTM/v-deo.htmlsi=xDeBErrTVZHGXJZ6
Can the TST Echo Signals be mounted in the upper (rearward) threaded holes instead of the lower (forward) threaded holes as presented in the video? This would place the Echo Signals up near the rear tail light and be ideal for solo riders who don't ever take a pillion.
Those rear holes are blind so the wires cannot be pushed through all the way. I have done this install personally but I had to drill out the inboard side of that hole without damaging the threads. I can't recommend this install because it alters the structure of the subframe, but I have proven it's possible.
@@TSTindustries Ok - thank you! 👍The TST tail tidy products look really well designed and it is awesome that they support a few different configurations. Great videos!
Any hint on unscrewing echo signal caps? They are sealed so tight so I can't unscrew them by hands. Tried with cloth but haven't succeeded much. Was able to get one off with pliers + cloth but failed with the second. Had to stop after noticeably scratching the cap(
We are. The conceptual design is done. Now Bart is putting manufacturability audit on the parts. Then we will be developing mold design and electronics concurrently.
I own Yamaha MT 09 2021 here in Australia and ordered the ST MECH-GTR Front LED Turn Signals for Select International Yamaha MT Models and TST MECH-GTR Running Light Connection Kit. The installation video on the TST website is shown using the US MODEL Variant of MT 09 SP 2021, which is different to the MT 09 2021 variant in Australia. I am confused about how to attach the running lights, as I have successfully installed the indicator lights, and they are working just fine. The running lights are not working, as I don’t know how to attach them. Can you please assist with this?
Unfortunately we do not have an international model bike here to make the specific installation video on. What I can do is send you some links to the videos of this product installed on a Kawasaki. Here in the USA Kawasaki motorcycles are configured like the Yamahas over in your area. They have a two conductor connector for the signal, and no running light connection for us to use. In that case we need to identify what we can connect our running light to using the blue wire connection kit. It has to be a switched and fused +12 supply, such as headlight area running light, accessory power socket, fusebox output of any circuit that can work for us. Let me dig up a few links and send you them.
ua-cam.com/video/1X8ECMeAdDw/v-deo.html ua-cam.com/video/5V3eDU1GAnU/v-deo.html ua-cam.com/video/X-AMt_kMhng/v-deo.html Please let me know if this gets your job straightened out. Good luck.
@@TSTindustries Thank you so much for your detailed reply on this, and I look forward to your reply on sending through the few links for further work from my end.
@@TSTindustries and how is the signal sent to the turn lights? I am asking this, because I need to know if I can conect an alarm to the turn flashes. Thx alot.
@@iurox the signaling system has an electronic controller embedded with some of the other electronics. I would urge you to double check the harness diagram before proceeding, but i think you can wire a diode in on the or positive signal leads and wire your alarm flasher lead in parallel there.
We can sell it to you but you have to be aware of certain facts about setting that up. The TST Industries undertail closeout is not set up to pass through the giant connectors that the OE signals terminate in. You would have to figure that out on your own. We also do not have any instrustions for setting that up so you would be on your own with that installation.
Yeah I love all these but I would much rather get the integrated tail light he says it's still in the works via email so I will hang on to the ugly tail for now then order the low mount and integrated tail light when it comes out at same time
The amount of options is amazing. Ill probably get the BL6 if my bike gets delivered before the integrated tail light release.
Very informative video , regardless if you're installing TST products or not. Thank you TST for all your "install videos" they really do help out. Love your products. Keep it up.
Thank you very much. I'm glad to hear we are improving riders' experience with their machines. That is one of our core missions.
-BR
Omg took me forever cuz I was doing it at night but I love how it cleans up the whole back of my bike. Thank you so much man.
Glad we could help and thanks for the support!
Can you instal the echo pods without the harness adapter? Doesn’t seem like you can
TST! best install videos, top quality products (w/great selection for my 2022 MT-09SP) at great prices with awesome customer service! Mahalo TST!
Do you have video instruction for connecting the running light wiring for your mech-evo turn signals? 2024 Yamaha MT-09
@@madsoothsayer around the 39:50 mark of this video we show options for connecting a running light on them or an active brake light. ua-cam.com/video/tgYgrV0EyTM/v-deo.htmlsi=xDeBErrTVZHGXJZ6
Can the TST Echo Signals be mounted in the upper (rearward) threaded holes instead of the lower (forward) threaded holes as presented in the video? This would place the Echo Signals up near the rear tail light and be ideal for solo riders who don't ever take a pillion.
Those rear holes are blind so the wires cannot be pushed through all the way. I have done this install personally but I had to drill out the inboard side of that hole without damaging the threads. I can't recommend this install because it alters the structure of the subframe, but I have proven it's possible.
@@TSTindustries Ok - thank you! 👍The TST tail tidy products look really well designed and it is awesome that they support a few different configurations. Great videos!
Any hint on unscrewing echo signal caps? They are sealed so tight so I can't unscrew them by hands. Tried with cloth but haven't succeeded much. Was able to get one off with pliers + cloth but failed with the second. Had to stop after noticeably scratching the cap(
Calipers with a screwdriver as a handle allowed to unscrew cap from the "inside rim". Yaaaay)
Are you guys working on a taillight with integrated turn signals? I loved the one I had on my fz07.
We are. The conceptual design is done. Now Bart is putting manufacturability audit on the parts. Then we will be developing mold design and electronics concurrently.
This is what I’m waiting for currently.
Great video!
Question… where would you guys mount the front (bullet) turn signals on the mt09?
Front Pod Turn Signal Video coming in the next week or so but they would mount in the same place as the stock signals.
I want to see the Mech GTR's as rear signals on the MT-09 SP
I have them on the front. It would be nice to match on the rear and splice the halo to the license plate light.
Where can I get the OIM turn signal bracket? I was not able to find it for MT09SP 2021 Model.
Thanks.
when will be the Integrated Tail Light for 2021 MT-09 release?
No ETA at this time.
I own Yamaha MT 09 2021 here in Australia and ordered the ST MECH-GTR Front LED Turn Signals for Select International Yamaha MT Models and TST MECH-GTR Running Light Connection Kit.
The installation video on the TST website is shown using the US MODEL Variant of MT 09 SP 2021, which is different to the MT 09 2021 variant in Australia.
I am confused about how to attach the running lights, as I have successfully installed the indicator lights, and they are working just fine. The running lights are not working, as I don’t know how to attach them. Can you please assist with this?
Unfortunately we do not have an international model bike here to make the specific installation video on. What I can do is send you some links to the videos of this product installed on a Kawasaki. Here in the USA Kawasaki motorcycles are configured like the Yamahas over in your area. They have a two conductor connector for the signal, and no running light connection for us to use. In that case we need to identify what we can connect our running light to using the blue wire connection kit. It has to be a switched and fused +12 supply, such as headlight area running light, accessory power socket, fusebox output of any circuit that can work for us. Let me dig up a few links and send you them.
ua-cam.com/video/1X8ECMeAdDw/v-deo.html
ua-cam.com/video/5V3eDU1GAnU/v-deo.html
ua-cam.com/video/X-AMt_kMhng/v-deo.html
Please let me know if this gets your job straightened out. Good luck.
@@TSTindustries Thank you so much for your detailed reply on this, and I look forward to your reply on sending through the few links for further work from my end.
@@TheJabbo27 I already sent those links in the message that followed my original reply. Please confirm you got them.
@@TSTindustries Thank you, I could locate the links you sent yesterday and will give it a shot later this week. Much appreciate.
Any plans on producing sequential turn signals?
That has been in the plans for a while. We just haven't circled around to producing another uuniversal signal design just yet.
Hi, can you tell me if this particular model of 2021, has a turn signal relay? Someone told me there is no relay. Thanks alot
There is no relay on the new 2021 model.
@@TSTindustries and how is the signal sent to the turn lights? I am asking this, because I need to know if I can conect an alarm to the turn flashes. Thx alot.
@@iurox the signaling system has an electronic controller embedded with some of the other electronics. I would urge you to double check the harness diagram before proceeding, but i think you can wire a diode in on the or positive signal leads and wire your alarm flasher lead in parallel there.
Is there a way to buy the OEM signal bracket for the 2021 mt 07 ?
We can sell it to you but you have to be aware of certain facts about setting that up. The TST Industries undertail closeout is not set up to pass through the giant connectors that the OE signals terminate in. You would have to figure that out on your own. We also do not have any instrustions for setting that up so you would be on your own with that installation.
Yeah I love all these but I would much rather get the integrated tail light he says it's still in the works via email so I will hang on to the ugly tail for now then order the low mount and integrated tail light when it comes out at same time
We are almost done with the molding tools for the tail light enclosure an lens. The electronics are also pretty much done. It won't be long now
@@TSTindustries thanks for the fast response as always top notch guy!
Great video. This helped me when I installed this recently on the SP. Keep it up!
Glad it helped!
Hi boss i am from malaysia i try to get mt09 2022 signal but in your website there is no malaysia deliever so how can i oder ?
Please check with one of our international dealers. Our dealer list can be found under the dealers tab on our website.
@@TSTindustries thank you sir
nice 👍
😎💥🏍️🚀✅
?
I don't understand what just a question mark means here