@@jfnunn1778 Ah, don't be scared. Just take your time, measure a few times, and it'll come out good. If you run into any problems or issues, you can always reach out and I'll do my best to help. But I'm sure you'll do just fine. 👍
@@MattGuynn yeah man, just been doing a lot of local stuff. Building a few enclosures, doing a few local sub builds and buying a few thing and selling a good bit of stuff around this way. I appreciate you asking buddy, and I was going to do some videos starting tomorrow. Hope all is well your way.
@@MattGuynn I don't mind replacing caps and stuff, but I don't get into do much more than that anymore... maybe some fets. You got some issues with something brother?
@@Chuck_Sanders picked up a absolutely gem of a m44 Phoenix gold... Everything on the board is beautiful .. no burns , no issues .. just the 4 caps on the input side small leak .. not even swelling.. but I wanna replace them
@@christopherparis6841 Alibaba.. lol, I'm very sure it's a TC Sounds...I have many, many of his drivers from over the years. From TC I still have a few epic series, lms and lmt series to AudioPulse, Sunfire Aura, Lightning Audio Storm and others. Even when he (Thilo) took designs overseas, it wasn't Alibaba either at the time. But now days China will copy about any design, like when his patents ran out on the Ti frame, the Axis frame and a few others. Now everyone uses his designs. I just chose this frame, instead of using one of my many Ti frames i keep in the archives.
@@christopherparis6841 but they would be different, as one is a Tc Sounds and one would be copy. Just because you can copy a design, doesn't make it the same or as good. Thanks for the comments.
@@Chuck_Sanders See Chuck this is what I'm talking about you got these guys that get all upset if you change one bolt now it's not a TC sounds anymore I guess next time in the description put TC sounds motor whatever kind of hardware you're using the exact basket where the cone came from who made the voice coil Don't forget the brand of epoxy you use I told you they want the whole backstory on the subwoofer 😅😅😅😅😅
@@FrankStPeter ah man, it's all good. If you remember, I went over all that before I started the build on this motor lol. The person should go back and watch those, leading up to this point. But in case they don't watch the previous videos, here's the rundown. It's a 12" UA frame with almost identical parameters of a TI frame, with 10" spider Landings. It has a USA made copper coil with high temp coating based off the original coil design, two progressive roll spiders that have been spaced, a double stitched tall roll surround, all sitting on top of a 3hp volcano top motor(yes, a real triple slug Tc Sounds 3hp). As far as the CA glue and epoxy brand I use...BS Industries more so as of late. Black high temp Voice coil adhesive is Hernon. Easy enough haha. Hopefully that'll help them. They had also said this was an old RE motor in another comment... but no Re motor looks like these at all.. not the SE,SX is SEX of I am remembering those from Scott correctly. Plus they were plated and polished steel used on the old Re motors. I will admit that in the past 28 years, I seem to forget more than I remember it seems. Getting old, man.. lol.
❤❤
I'm scared to recone my DC audio level 3 12 but going to try it! Kinda excited.
@@jfnunn1778 Ah, don't be scared. Just take your time, measure a few times, and it'll come out good. If you run into any problems or issues, you can always reach out and I'll do my best to help. But I'm sure you'll do just fine. 👍
For sure man all's u have to do is try and make sure u have your coil spaced and squared up .
I'm going to send you some more of those truck I don't like them I like the steel paper clamps they work better for me
@@FrankStPeter OK, cool man. I go through clamps quite often lol. I appreciate that very much.
Get a couple metal rings n use 4 vice grip sets or 4cclamps it's kinda really nice
I just had to get rid of my 18 pro... Makes me sick thinking about it... Sigh...
@@TheAceTroubleshooter The stuff from Thilo, getting harder to come by anymore. I feel your pain.
Yo brother you ok?
@@MattGuynn yeah man, just been doing a lot of local stuff. Building a few enclosures, doing a few local sub builds and buying a few thing and selling a good bit of stuff around this way. I appreciate you asking buddy, and I was going to do some videos starting tomorrow. Hope all is well your way.
@@Chuck_Sanders awesome brother 👍.. hadn't seen anything or spoken to you in a while . Making sure you're ok
@@Chuck_Sanders how comfortable are you on amp stuff?? Just recap on power side??
@@MattGuynn I don't mind replacing caps and stuff, but I don't get into do much more than that anymore... maybe some fets. You got some issues with something brother?
@@Chuck_Sanders picked up a absolutely gem of a m44 Phoenix gold... Everything on the board is beautiful .. no burns , no issues .. just the 4 caps on the input side small leak .. not even swelling.. but I wanna replace them
U sure thats tc? Looks alibaba not that their different i mean tlow did take tc to japan to live years as eclipse.
@@christopherparis6841 it's a TC sounds volcano motor different basket,,he making a custom SPL sub
@@christopherparis6841 Alibaba.. lol, I'm very sure it's a TC Sounds...I have many, many of his drivers from over the years. From TC I still have a few epic series, lms and lmt series to AudioPulse, Sunfire Aura, Lightning Audio Storm and others. Even when he (Thilo) took designs overseas, it wasn't Alibaba either at the time. But now days China will copy about any design, like when his patents ran out on the Ti frame, the Axis frame and a few others. Now everyone uses his designs. I just chose this frame, instead of using one of my many Ti frames i keep in the archives.
@@christopherparis6841 but they would be different, as one is a Tc Sounds and one would be copy. Just because you can copy a design, doesn't make it the same or as good. Thanks for the comments.
@@Chuck_Sanders See Chuck this is what I'm talking about you got these guys that get all upset if you change one bolt now it's not a TC sounds anymore I guess next time in the description put TC sounds motor whatever kind of hardware you're using the exact basket where the cone came from who made the voice coil Don't forget the brand of epoxy you use I told you they want the whole backstory on the subwoofer 😅😅😅😅😅
@@FrankStPeter ah man, it's all good. If you remember, I went over all that before I started the build on this motor lol. The person should go back and watch those, leading up to this point. But in case they don't watch the previous videos, here's the rundown. It's a 12" UA frame with almost identical parameters of a TI frame, with 10" spider Landings. It has a USA made copper coil with high temp coating based off the original coil design, two progressive roll spiders that have been spaced, a double stitched tall roll surround, all sitting on top of a 3hp volcano top motor(yes, a real triple slug Tc Sounds 3hp). As far as the CA glue and epoxy brand I use...BS Industries more so as of late. Black high temp Voice coil adhesive is Hernon. Easy enough haha. Hopefully that'll help them. They had also said this was an old RE motor in another comment... but no Re motor looks like these at all.. not the SE,SX is SEX of I am remembering those from Scott correctly. Plus they were plated and polished steel used on the old Re motors. I will admit that in the past 28 years, I seem to forget more than I remember it seems. Getting old, man.. lol.
❤❤❤
@@AlexCarl-j7m give that baby boy, a big hug and a kiss!
@@Chuck_Sanders we will for sure! he’s growing up so fast! Can’t wait to see yall again!
@@AlexCarl-j7m I know he is lol. And a few months will be here before you know it... and we will see you guys.