Waah yaar kya cheez banai hai...aisi koi vedio youtube par nahi hai.... Bas ek kaam aur karna tha ek emergengy light aur lag jati to maza aa jata....great Art..
I like the engineering of it and the use of a potentiometer in place of a on/off or 2/3 position switch. I think the super glue is a weak spot, Maybe should epoxy it after gluing it in place. My wife purchased one of these fans for me and i find it very useful. Thing is i find my self having to clean the fan blades from time to time. With your fixed grill this could be difficult and time consuming. A few tabs on the grill and L slots in the shroud it could be removable for cleaning of the blades and grill. Great work always nice to watch a craftsman bring there ideas to life. Thanks for the vid. keep up the good work.
My suggestion is that you should twist the wire like a spring, then when you lengthen or shorten the shaft of the fan, you won't have to adjust the wire anymore. Great work.
تو هنرمند هستی.فارسی برات کامنت گذاشتم تا بدونی بیننده از کشور های مختلف داری و همه مردم میتونن با کارات ارتباط خوب برقرار کنند.کار تو فوق العاده هستش .احسنت
I m also think to make it but don't have sufficient time . You made it with nice finishing. I really like it. I more suggestion - you can add a flash light in front of fan axis
awesome work dude...... Please provide the motor and power bank discription....and using PVC's length and breadth....that will be useful for us to do by ourself....
Hello, Crompton fan ka stand jaha pe balancing hota hai vo, rod insert hota hai vaha pe fiber slot tut gaya hain, kya use table fan me convert kar skate hai ya use stand aur balance karne ka koi tarika hai to please help🙏🙏
Well done sir, but my suggestion is, design / make somethings that are not easy to get in the market or too expensive to buy from the market, that will sure attract more viewers. Just my 2 cents. Thanks for your hard works and sharings anyway.
Manufacturer of PVC pipe must not have thought creativity of people will reach this level 😍❤️😁
This is not the idea only for a fan .
Every things every step is very mind blowing and good working ideas .
Really really appreciated this project.
Thank you bro🙏😊
Lots of like and respect from 🇵🇰🇵🇰🇵🇰🇵🇰🇵🇰
🇵🇰🇵🇰🇵🇰🇵🇰🇵🇰🇵🇰
Waah yaar kya cheez banai hai...aisi koi vedio youtube par nahi hai.... Bas ek kaam aur karna tha ek emergengy light aur lag jati to maza aa jata....great Art..
Thank you😊
I like the engineering of it and the use of a potentiometer in place of a on/off or 2/3 position switch. I think the super glue is a weak spot, Maybe should epoxy it after gluing it in place. My wife purchased one of these fans for me and i find it very useful. Thing is i find my self having to clean the fan blades from time to time. With your fixed grill this could be difficult and time consuming. A few tabs on the grill and L slots in the shroud it could be removable for cleaning of the blades and grill. Great work always nice to watch a craftsman bring there ideas to life. Thanks for the vid. keep up the good work.
v
n
vbvbvbb
b
nbv
bbbb
b
b
b
bbbvb
v
bnvyvy
b
b
uu
ub
y
b
bmv
yybyyyuyyuyuuumy y
yb
y
yuyyuy
yb
uu
@@mrajpoot4735 stutter much? or just can't speak?
My suggestion is that you should twist the wire like a spring, then when you lengthen or shorten the shaft of the fan, you won't have to adjust the wire anymore. Great work.
تو هنرمند هستی.فارسی برات کامنت گذاشتم تا بدونی بیننده از کشور های مختلف داری و همه مردم میتونن با کارات ارتباط خوب برقرار کنند.کار تو فوق العاده هستش .احسنت
Why need 3d printer when you have pvc pipes.. 👍 Awesome work brother
😀 thank you bro
Ye bahot acchi bat boli apne
9⁹9 AA oo ⁹ AA 0 look oo oo 9⁹
Oo 0 oo
09 99 99 99 99 99 19 9 99 99 of 0 oo 99 99 99 of 99 99 99 o oo 99 99
9 lo 99 99 lo 99 o oo 99 oo loo loo 99 99 99 99 ll 99 of poo oo 9o9 99 99 9 99 lo 99 99 99 lo look 99 oo 99 99 99 99 9 99 ll 99 lo 99 ll 99 99 o loo 99 99 99 99 9 pp oo oo 9 99 99 99 99 ll 99 99 99 99 o 99 99 99
Oo 99 99 9 99 99 99 99 900 99 9 99 99 9
भाई आपका काम बहुत ही बढ़िया होता है जैसे लगता हैं मार्केट से बॉय किया है प्रोडक्ट आप सुपर हो
Thank You Brother
You're so good Boss👍👍 👍 .... Greetings from Ghana, West Africa
thank you sir
Want to bay this fan
Please give the contact number
Bhut mast pankha hai // best 👍👍🥰 fan ever
Thank You🙏🙏
Your welcome
Rechargeable fans ke bht video dekhe hai UA-cam pr but esa video nahi Dekha really amazing
Thanks a lot
thank you 🙏
Do'stim bundan zo'r chiqishi mumkin e'mas ofarin 👍👍👍👍👍👍👍
Thanks idea... Excelent.. 9:50
I m also think to make it but don't have sufficient time . You made it with nice finishing. I really like it.
I more suggestion - you can add a flash light in front of fan axis
Thanks for suggestion i will make another portable fan with flash light and I checked u r channel doing good work keep going all the best
Quedó increíble tu ventilador portátil ❤❤❤ Hasta puede cargar dispositivos 🎉🎊💕🇦🇷
Fabulous designing
Thank You
A perfect example of hard work.. love and support from UA-cam @Electro Yalla
In a single word... AWESOME!!
Thank you so much 😊🙏
Wawo amazing super work nice sharering dear
Thank you
idea and creation is great but its not as simple as you shown in video. it takes alot of time and effort, over all good and outstanding design
broo that pressition and hardworking this mad is i can just tell it brooo!
👍👍👍👍❤️❤️❤️ Greetings from Algeria 🇩🇿
Thank You❤❤❤❤
السلام عليكم جميله جدا. لكن لو كانت تدور توماتيك بتطلع احلى
This was remarkably efficient and easy to achieve by clicking on the buy button.
Twisting wire is wrong idea. Twisted wires act like coil. It will cause of power loss and cable can get excess heat. So do not twist cables
Very good workmanship! However, you covered the motor with PVC. Wouldn't that remove cooling for the motor?
Your right
Khatarnak finishing
made an existing fan, i feel like this is more fun then buying one
Very nice invention.
Thank You
awesome work dude......
Please provide the motor and power bank discription....and using PVC's length and breadth....that will be useful for us to do by ourself....
There are no items in Google Drive
My hand tried to like your video
Very good cute and beautiful
Thank You
Very good creation from PVC pipes. Keep going good in future❤️❤️❤️👌👍🌹
Little bit of too much work for DIY but results are much better. Good work 👏
te quedo impresionante pero te fallo el tiro de el cableado deberias de hacerlo eficaz muchas felicidades
Super finishing and nice work.
Thank you
Nice kuch is tarah ka hi aur video chahie 🙏😊
Definitely will do.
nice and good thought appreciate you idea. dear
Thank you
Let's appreciate this man! 🙏🙏
Your vedio is very much good keep it up
Thank you so much brother
Very very good parajact supper👌
Thank you
Is video pe like to banta hain
I give you A+ for this work.
thank You
Hello, Crompton fan ka stand jaha pe balancing hota hai vo, rod insert hota hai vaha pe fiber slot tut gaya hain, kya use table fan me convert kar skate hai ya use stand aur balance karne ka koi tarika hai to please help🙏🙏
You are so legend bro
Thank you bro
U can make the wire like spring shape so it's easy to extend and retain👍
Very nice video bro 👍👍👍🔥👍👍👍
Thank You
ماشاء الله مبدع الله يوفقك
Thank You
idea use power bank very nice!!!!)))
Extremely hard work
thank you
Clear and Everything look Factory made❤
Good project work
Mind boggling ❤❤❤
инженер от бога.👍
So Creative👌💐
You are very creative guy I have seen ever. Great work brother😍😍
Thank You So much
Can I buy this fan
😲Good, good very nice 👍🙏🙏🙏
Good work waite for author vedio
Thank you, Sure
Really Great work, and Video editing is also Good..👍👍
Thank you brother🙏
Excellent Great effort...Motor would have been of little more powerful one for this Build Quality
Wow So beautiful fan
Thank you
gazab ka kalakari hai year
Thank You so Much 🙏🙏
That's Very hard work.
You are good❤🎉
R aktu clear korun
Emni khub khub khub valo hoye che
Well done sir, but my suggestion is, design / make somethings that are not easy to get in the market or too expensive to buy from the market, that will sure attract more viewers.
Just my 2 cents. Thanks for your hard works and sharings anyway.
Thank You so much
I love manufacturing new gadgets so
Master class pvc pipe
😯👍👍👍👍 very good
Can you give the template link? It doesn't available in description.
Now available Please check in description. Thank You
Keren kreatif 👍
Formidable 👍👍🇨🇮
I think it would be easier and cheaper to just buy one!!
U r the master of PVC pipe 😂😂
Thank you 🙏😊
Wow 😎 Superb hardwork
Yet another glue "DIY" video. Kids may find fascinating this glue work.
Very nice idea, my friend
thank you
Admirable, but the motor core has no latch, I'm afraid I'll use it for a while, the propeller will fall off.
Mere paas aisa portable fan hai but hawa ki speed bohot kam hai aur chhota bhi hai .uski height badhani hai aur speed bhi . Kya krna hoga sir
creative and smart idea bro.
Thank you
Amazing skill
Sincerely.. this is genious 👍
Really excellent
Thank you
Hello, Mr Kv. Can you please tell me the name of the motor.
9v Dc Motor
Amazing video
I'm also tried it successful
I am see you your channel is grow very fast like technical ninja good job
Thanks for your appreciate me, like You Everyone should Encourage me, i Can do more things.
This is mind boggling 💯% pure talent
Just brilliant and mind blowing 👍
Super idea KV ji
Thank you 😌
Ô Britânia, mondial, da uma olhada nisso! Precisamos disso pra ontem!
Fantastic.. 🙏🙏✌✌
Super talented working.if I want buy this fan.tell me about price...
Tell me price
Sorry not for sale
Vary hard work
Wow amazing
Thank So much
Nice finishing
Thank You
Wow awesome ❤️🇧🇩
Thank you
@@ManaCinemaNews7 wlc
I'm indian🇮🇳
me too
Make a projector bro
bro i also have the same motor but its heating up and consuming upto 2 amps with a propeller on