Bud.. This was the most educational video in carb building i think iv watched. Its good that u not just talking about unnecessary stuff.. Definitely will be watching alot more of your stuff. Thank you for your time sir, and the knowledge.
Thank you for making this video.. this will help me to service and reassemble the 36 DCD 7 in Fiat 1100-103H project i just took on..also from your flat spot video i learnt the correct side to replace the spray nozzle and that will be extremely helpful.
Boeta you helped a whole lot, I wanted to ask some questions regarding over fueling to a point that is comes out between the head and body where the gasket is. What is the cause for that ?
Thank you I'll have a look, because I am able to drive but the car has a weird idle and a heavy overfueling smell. This did all happen after I revved to 5.500 in forth, on a jetta 2 1.8 8v. But ever since then she hasn't been right
Hey , awesome video I had a question ,if everything concerning this carb is fine why won't My car run unless I press on the venturis the idle is set correct but the moment I let my hand go of the choke it dies off
Hi Roy, thank you for the comment. Perhaps the idle jet is blocked or the idle channel is blocked. Check that your idle jet is the correct size for your engine capacity. Try the idle air screw at two and a half turns out as a starting point. Check that the carb base is not sucking air as it seems to idle with additional fuel. Please let me know how you get on.
Hi, love the video!!! I need so advice tho I have a Nissan 1400 with a Weber 36 dcd, But it’s stalling out when I go into neutral coming to a stop. Do you think it’s carb related or could it be something else?
Hi love your videos. Please let me know the jet sizes you use for std Nissan 1400 ldv In my 36 dcd 2 Mains 125/145; venturi F23/F30; Air jets 210/185; Choke 23/27 Thanks. Also do you have a adaptor spare pse
Thank you for liking the video, Many combinations are available, your setup will work well but try mains 125/135 emulsion tubes F23/F30 air correction 210/180 24/24 choke tubes
@@carburettorrebuildservice8964 Hi what price for adapter to Nissan 1400 and also the price for a carb kit, Needle & seat plus gaskets. Is it necessary to have a heat shield (Bakelite) or are the supplied gasket in kit ok by itself. How do I order them details thanks Reg. Also in an exploded view no. 28 says Inspection screw, just above the mixture adjust screw. On one side it is blank (2ndry side) on primary side there is threads leading to a tiny hole. I am missing that "blank off screw?. Maybe you have a spare.
some kits are put together for multiple carbs so if you have bits left don't stress about it. as long as you have put everything back that you took out.
The emulsion suction plunger is missing from the carb , at the back of the choke , very very important piece of the 36dcd , crucial part , carb won't work without it.
Bud.. This was the most educational video in carb building i think iv watched.
Its good that u not just talking about unnecessary stuff..
Definitely will be watching alot more of your stuff.
Thank you for your time sir, and the knowledge.
Thank you, i am glad you liked it
This is some of the best tech. content of it's type on the web. Very generous of you to share that for the rest of us. Cheers.
Pleasure, i am glad you enjoy the contence
Busy rebuilding my 36dcd, so very helpful video. Thank you 👍🏼
pleasure, i am glad i could help you
Thank you for making this video.. this will help me to service and reassemble the 36 DCD 7 in Fiat 1100-103H project i just took on..also from your flat spot video i learnt the correct side to replace the spray nozzle and that will be extremely helpful.
pleasure
Boeta you helped a whole lot, I wanted to ask some questions regarding over fueling to a point that is comes out between the head and body where the gasket is. What is the cause for that ?
Hi, needle & seat isn't closing, could be warn needle & seat or incorrect adjustment
Thank you I'll have a look, because I am able to drive but the car has a weird idle and a heavy overfueling smell. This did all happen after I revved to 5.500 in forth, on a jetta 2 1.8 8v. But ever since then she hasn't been right
Hey , awesome video
I had a question ,if everything concerning this carb is fine why won't My car run unless I press on the venturis the idle is set correct but the moment I let my hand go of the choke it dies off
Hi Roy, thank you for the comment. Perhaps the idle jet is blocked or the idle channel is blocked. Check that your idle jet is the correct size for your engine capacity. Try the idle air screw at two and a half turns out as a starting point. Check that the carb base is not sucking air as it seems to idle with additional fuel. Please let me know how you get on.
Hi, love the video!!! I need so advice tho I have a Nissan 1400 with a Weber 36 dcd, But it’s stalling out when I go into neutral coming to a stop. Do you think it’s carb related or could it be something else?
check your timing first, then check for any leaks on your carb and carb adaptor.
Hello nice video I have same carb for 1.6 fox but car over fuel and doesn't idle I dont now wat size jets I need
please whatsapp me on 0606546966
please whats app me on 0606546966
Hi love your videos. Please let me know the jet sizes you use for std Nissan 1400 ldv
In my 36 dcd 2 Mains 125/145; venturi F23/F30; Air jets 210/185; Choke 23/27
Thanks. Also do you have a adaptor spare pse
Thank you for liking the video, Many combinations are available, your setup will work well but try mains 125/135 emulsion tubes F23/F30 air correction 210/180 24/24 choke tubes
yes, i have adapters available
@@carburettorrebuildservice8964 Hi what price for adapter to Nissan 1400 and also the price for a carb kit, Needle & seat plus gaskets. Is it necessary to have a heat shield (Bakelite) or are the supplied gasket in kit ok by itself. How do I order them details thanks Reg.
Also in an exploded view no. 28 says Inspection screw, just above the mixture adjust screw. On one side it is blank (2ndry side) on primary side there is threads leading to a tiny hole. I am missing that "blank off screw?. Maybe you have a spare.
@@regmarkides567 please whatsapp me 060 654 6966
@@carburettorrebuildservice8964 Hi, this is my WhatsApp no 0711120166
Reg Markides. Howick.
Will be in Witpoortjie from 25 March to 13 May.
Thanks Reg
Where can I buy a 36 weber carb for a mk2 golf and how much will it be
Look on Facebook market place but be careful, most of the carbs are junk. I unfortunately don't have at the moment.
Hi where you from I have got stuff in a carb kit that I do not now where they go pls help love your video it helped alote but have pieces left
Hi Martin, i am from Pretoria.
some kits are put together for multiple carbs so if you have bits left don't stress about it. as long as you have put everything back that you took out.
Hi sal graag wil uitvind waar kan ek jets koop of selfs i rebuild kit vir 36 dcd 7 ek van pietermaritzburg en hoe kan ek dalk in kontak kom met jou
Ek kan jou carb vir jou doen, whatsapp my op 0606546966
The emulsion suction plunger is missing from the carb , at the back of the choke , very very important piece of the 36dcd , crucial part , carb won't work without it.
i know it is pretty off topic but does anybody know a good place to stream new series online?
@Flynn Braylon i use Flixzone. You can find it on google =)
@Flynn Braylon Try flixzone. Just search on google for it :)
@Flynn Braylon i use FlixZone. Just search on google for it =)