Wish you had a list if supplies in the description box. I love this bracelet. I want to make one. I'm gonna practice with my copper wire before I use my sterling wire. This is a great video and u are an excellent teacher. Thank you sir.
I’ve learned all my techniques from UA-cam and have many saved videos. Yours is one of the very best. Very much appreciate attention to small, annoying issues, that occur with hand making these hand made pieces. I haven’t worked with square wire yet and this design will be my first attempt, as soon as I purchase some square wire. Of course, I will subscribe!
Thank you for this video. I love that you show in great detail how to do things. I am unable to find the lengths of wire that you started the video with. Was there a part one that I can't find?
Sorry about that. You can use 3x the bracelet length on your 1st bracelet & then work it down to shorter less wasteful length once you get experience making them. Thanks
I enjoyed watching so many of your videos. The information you give with the tips help with issues that may arise. In this video you demonstrate the use of a pin vise. I was wondering if you could name the manufacturer? Thank you for sharing your gift and talent with the world!
Beautiful and simple to follow. Thank you very much. I have a bracelet that was given to me by a dear friend who has since passed away. I have been looking for ideas of how to alter it so that I can wear it and this video has shown me a lovely way to enhance it.
I love your tutorials. I have been very successful learning your rings. I wish there was a way I could share pictures so that you can see. Thank you so much!❤
Really enjoyed your video- thank you, you are very clear in your instructions. I just need to find a ruler that has imperial measurements as well as metric, so l can convert.
I looked through all the comments and each time someone asks about the gauge of the wires used, there is no comment or reply. Maybe because its an old video and you dont remember? I could guess by looking at the shots close up but I would rather get it right.
Where do you buy the wire you use. Your twisted wire was very stiff. I used 21ga sq wire is is so soft not hard. I’d love to make the bracelet but my wire seems weak. Thank you love your projects
7:21 He said 3/4” longer than a loose measurement of your wrist. He added a couple inches, doubled that and bent it a few inches down. The wrap wire he started with an 8” length.
Firstly, I love your tutorials! You are very clear and concise in your instructions For this bracelet can you place twisted wires on the outside? Would or does that affect the band?make it less solid? I also just want to say I find your voice calms me, you know, slows me down so sometimes I will just play a video for background while I may be working on a different project. Thank you.
I totally agree that you have a wonderful voice, very soothing 😊 great tutorial. I might one day be brave enough to try it. What a wonderful gift it would make
I’ve learned so much from you. ThankYou. Do you know how to make the Pharela ring. That was on wire-sculpture n the broke into 3 sites. cant find it any where. This was a ways back.
Hi could I ask as I'm new to this wire wrapping I won't to make this bracelet but I'm unsure how much to charge ...have you any advice for me please .I won't to use sterling silver plated with copper filled...hope you can advice me please thank you in advanced...absolutely love your work x
Just take the cost of materials, value of your labor, add in the amount of profit you want to make. Check those figures against what the market will bear or what someone is willing to pay. Adjust yours up or down from there.
Hey Brother wouldn't be simpler or easier to use a drill or Dremel to turn the wire?, Other wire thank you for sharing with with us all, I know I am thankful.
Thank you for your really calming videos. I enjoy them so mutch. I am searching for this hand drill but can not find one where the wire goes through. Could you help with that please. Thank you
I wasnt too impressed with the first couple of videos. Your camera is fuzzy and the lighting could be better. Felt on your worksurface would increase visibality. More light, more close ups. But mostly lighting is in need of improvement. My eyes are not young anymore. Then the 3rd one I watched was the bracelet video. That honestly took my breath away. Beautiful, yes, but the tech well, it sold me. I watched all the rest 1 by 1. The 1/2 hard wire is new to me. Ive never used it, but im looking for wire now. Im open to subjestions. Where do you buy? Im an experiencec wrapper and I love doing wire. Ive not sold my wire work. I had a shop on Etsy for 16 years but I sold pearls and pearl handmade jewelry. After 20 plus years of experience Im ready to get better at wire. Your style is simple and presice. After watching all your lessions, ive found a great teacher. The mop ring well, its awesome as well. Very impressive. I have a box full of faceted gemstones. Im looking for prong work rings with the quality of your m.o.pearl dome ring. You say more videos to come. Ill find me some 1/2 hard gold fill wire. Ill be ready. There are some good teachers on utube but to find a teacher with professional jewelry store gold jewelry style with simple instruction. You are in a class by youre self. Simple tips like buffing the side of the files, thats really helpful. Thank you for the good lessions. Im waiting for more. Sharon Kay
Please understand. I make these videos back in the VHS tape days, which was high quality for the time. Of course this was before UA-cam was a thing, so yes all of your points are true & needed. However, I'm not a young man anymore & I do not have the time to remake the video series. I uploaded them because they have educational value still today. I really appreciate you for your time & your comments, greatly appreciated. I'm so glad you found the video useful and thank you for the kind words. As for the wire, I haven't sourced it in awhile and I no longer sell it, maybe someone will leave a comment... I will post it if possible.
Sure is faster .... for production line jewelry. Has less precise control in my case. I like my method, no over twisting and I enjoy the process. Thanks for the comment.
Wish you had a list if supplies in the description box. I love this bracelet. I want to make one. I'm gonna practice with my copper wire before I use my sterling wire. This is a great video and u are an excellent teacher. Thank you sir.
Would be nice to know what gauge of wire you’re using. Love your work. Thank you for sharing..
I too wish you’d have left measurements of wire in description box. However, great teach, beautiful work and fun to watch. Thank you.
Thank you for your “no nonsense” approach to demonstrating this technique! It’s refreshing to hear the steps without a bunch of “fluff”! ❤
I took a wire jewelry making class years ago. So grateful for this video cause you brought all my memories back on how to make these
I just found you. Thank you for the precise way you teach us things on making beautiful things
You are so welcome!
beautiful bracelet, awesome tutorial.....thanks for sharing your amazing talent 😊
Your teaching. Thank you for sharing your talent. I used copper first and then moved on to silver. Thanks, again.
I’ve learned all my techniques from UA-cam and have many saved videos. Yours is one of the very best. Very much appreciate attention to small, annoying issues, that occur with hand making these hand made pieces. I haven’t worked with square wire yet and this design will be my first attempt, as soon as I purchase some square wire. Of course, I will subscribe!
Beautiful!❤ thank you for sharing😊
You are so welcome!
Thank you so much! What a wonderfully calm and helpful video🐞
Glad it was helpful!
Gorgeous bracelet. Thank you for the wonderful tutorial.
Great tutorial. Thank you.
Please make us another new video! I love watching you as much as making your pieces❤️
You do amazing work and your a very good teacher!!!
love this design. great tutorial
BEAUTIFUL!!! I love the way you did the ends of the bracelet. TYVMFS
Thank you so much!
Beautiful, classy bracelet!
Thank you so much for sharing your amazing techniques, they are so elegant 🎉
Thank you, hope you enjoy the others.
Merci pour ce tuto tres bien explique pour une débutante comme moi
What gauge wire do you use? The other wire is half hard round, square or half round ?
Thank you for an excellent tutorial!
Thank you for this video. I love that you show in great detail how to do things. I am unable to find the lengths of wire that you started the video with. Was there a part one that I can't find?
Sorry about that. You can use 3x the bracelet length on your 1st bracelet & then work it down to shorter less wasteful length once you get experience making them. Thanks
Wow...such a beautiful bracelet 😍
I enjoyed watching so many of your videos. The information you give with the tips help with issues that may arise. In this video you demonstrate the use of a pin vise. I was wondering if you could name the manufacturer? Thank you for sharing your gift and talent with the world!
Beautiful handwork. 🙏
I just found this channel. I see you haven't posted for awhile. You do beautiful work. I learned a lot from you. Thanks.
Thank you... this was an excellent tutorial! Love the bracelet!
You are so welcome!
Beautiful work
Nice! I missed the part where you showed how you made the end with the catch I'll have to go back and watch it again.
Thank you! I think you need to go to around 15:10 for the start of making the catch, loop end is earlier in the video.
Beautiful and simple to follow. Thank you very much. I have a bracelet that was given to me by a dear friend who has since passed away. I have been looking for ideas of how to alter it so that I can wear it and this video has shown me a lovely way to enhance it.
You are very welcome.
Brilliant very informative and your instruction are clear will definitely give this a go !!
Go for it, try a simple one first. You'll be great!
Thank you for sharing your talents, I just subscribed.
This is beautiful, can you tell me the gauge of wire you used and the lengths? I can't find the other video explaining that
Very good!❤👏🏻👏🏻👏🏻
Love it, love it, love it can you say what size wire you use please
Beautiful!!
Very detail. I love it
Thank you very much.
I love your tutorials. I have been very successful learning your rings. I wish there was a way I could share pictures so that you can see. Thank you so much!❤
Great job! You crafted your rings, they came from your heart, your time & your skill. I just showed you how. Very proud, thank you.
Thank for this video of a lovely bangle. There was no list of either tools or supplies. What gauge wire did you use?
For the shaping you could use a piece cut from an axe handle or find an old mannequin hand.
Thank you.
Really enjoyed your video- thank you, you are very clear in your instructions.
I just need to find a ruler that has imperial measurements as well as metric, so l can convert.
Glad it was helpful!
Very beautiful bracelet 🤩🤩🤩
Thanks for watching!
I looked through all the comments and each time someone asks about the gauge of the wires used, there is no comment or reply. Maybe because its an old video and you dont remember? I could guess by looking at the shots close up but I would rather get it right.
I usually use 18g square wire and 22g round, 20g half round for the flat wrappings to hold it together
Where do you buy the wire you use. Your twisted wire was very stiff. I used 21ga sq wire is is so soft not hard. I’d love to make the bracelet but my wire seems weak. Thank you love your projects
I haven't sourced it in awhile. Maybe someone can comment on a source...I will post it if possible.
What lengths of wire do you use? Please
he obviously doesnt monitor his u tube channel but I figured 20 inches for the long twisted wire.
I do monitor, health doesn't allow me to engage too often.
Length of wire depends on the size of the bracelet you are making. You have to determine that.
7:21 He said 3/4” longer than a loose measurement of your wrist. He added a couple inches, doubled that and bent it a few inches down. The wrap wire he started with an 8” length.
Would u tell what length of wire we need to twist, and to make bracelet
Great work
what are the meausuements of the wire you use
Firstly, I love your tutorials! You are very clear and concise in your instructions For this bracelet can you place twisted wires on the outside? Would or does that affect the band?make it less solid? I also just want to say I find your voice calms me, you know, slows me down so sometimes I will just play a video for background while I may be working on a different project. Thank you.
I totally agree that you have a wonderful voice, very soothing 😊 great tutorial. I might one day be brave enough to try it. What a wonderful gift it would make
I’ve learned so much from you. ThankYou. Do you know how to make the Pharela ring. That was on wire-sculpture n the broke into 3 sites. cant find it any where. This was a ways back.
Thank you
Hi could I ask as I'm new to this wire wrapping I won't to make this bracelet but I'm unsure how much to charge ...have you any advice for me please .I won't to use sterling silver plated with copper filled...hope you can advice me please thank you in advanced...absolutely love your work x
Just take the cost of materials, value of your labor, add in the amount of profit you want to make. Check those figures against what the market will bear or what someone is willing to pay. Adjust yours up or down from there.
@@wireartjewelry9045 thank you for your reply love x
Are you using half hard wire?
You are de best!!!!
Thanks for sharing
Hey Brother wouldn't be simpler or easier to use a drill or Dremel to turn the wire?, Other wire thank you for sharing with with us all, I know I am thankful.
You can, but you have less control and risk breaking or bending the wire by twisting too fast.
Thank you for your really calming videos. I enjoy them so mutch. I am searching for this hand drill but can not find one where the wire goes through. Could you help with that please.
Thank you
You are so welcome!
can also use a battery operated drill
its called a pin vise, you can also use a 4v cordless screwdriver with a 1/4" shank drill chuck adaptor. Hope this helps.
I think he said that it was 21 or 22 ga sq that he is twisting. Half hard next but no gauge mentioned
Where is the info on the type of wire used in the video???
Right!
He covers that in his first video on tools and supplies
May I ask , how many little bends have yo made ?
WHERE YOU BUY THE SILVER GOLD PLATED ? RIO GRANDE?
Hey do you do classes?
I need to upgrade the wire I buy and get wire clippers.
Where would you suggest buying wire from?
Can you provide the tool that you use to twist The Wire?
It's a pen/pin vice.
A cordless drill is faster
I wasnt too impressed with the first couple of videos. Your camera is fuzzy and the lighting could be better. Felt on your worksurface would increase visibality. More light, more close ups. But mostly lighting is in need of improvement. My eyes are not young anymore.
Then the 3rd one I watched was the bracelet video. That honestly took my breath away. Beautiful, yes, but the tech well, it sold me. I watched all the rest 1 by 1. The 1/2 hard wire is new to me. Ive never used it, but im looking for wire now. Im open to subjestions. Where do you buy?
Im an experiencec wrapper and I love doing wire. Ive not sold my wire work. I had a shop on Etsy for 16 years but I sold pearls and pearl handmade jewelry. After 20 plus years of experience Im ready to get better at wire. Your style is simple and presice. After watching all your lessions, ive found a great teacher. The mop ring well, its awesome as well. Very impressive. I have a box full of faceted gemstones. Im looking for prong work rings with the quality of your m.o.pearl dome ring.
You say more videos to come. Ill find me some 1/2 hard gold fill wire. Ill be ready. There are some good teachers on utube but to find a teacher with professional jewelry store gold jewelry style with simple instruction. You are in a class by youre self. Simple tips like buffing the side of the files, thats really helpful. Thank you for the good lessions. Im waiting for more. Sharon Kay
Please understand. I make these videos back in the VHS tape days, which was high quality for the time. Of course this was before UA-cam was a thing, so yes all of your points are true & needed. However, I'm not a young man anymore & I do not have the time to remake the video series. I uploaded them because they have educational value still today. I really appreciate you for your time & your comments, greatly appreciated. I'm so glad you found the video useful and thank you for the kind words. As for the wire, I haven't sourced it in awhile and I no longer sell it, maybe someone will leave a comment... I will post it if possible.
Beautiful bracelet. Video painfully long
a drill is faster.
Sure is faster .... for production line jewelry. Has less precise control in my case. I like my method, no over twisting and I enjoy the process. Thanks for the comment.
If you used a drill it would probably go out of control or go to fast or twis5 wire so much it will break....slow and steady wins the race.
Your very slow and meticulous
Thank you, do yours the same and they will come out great!