Selection criteria and design of 5V/1A power supply|Power Electronics|Filter capacitor Calculations
Вставка
- Опубліковано 7 вер 2024
- In this video,5V/1A DC regulated power supply design is explained along with circuit diagram.
Part List
Transformer
Bridge rectifier
Filter capacitor(high value electrolytic capacitor)
Regulator
#5V1A#powersupply#design#electronics
Thanks ma'am.I am searching for this from 6months.
Welcome
Very well explained ❤
Thanks a lot 😊
Your calculation not ok. 12* 1.414- 1.2 = 15.7 volt IC input.
Hello sir
Here I have calculated voltage by considering 10 percent tolarance as mains voltage is not constant 230vac
When primary voltage is 207 vac secondary output is 12-1.2=10.8Vac
After rectifier it is 10.8*1.414=15.27vdc
Considering two diode drop
15.27-1.4=13.87vdc
Calculation ok but I practically tested. my calculation volt got.ok thanks.