Hi, I was watching one of your homeworks videos about floor lighting plans, I was wondering what software you or the architect used to create those lighting plans
Hi, We have the RA2 Select system provided to us by the builder and we have to buy the fittings for the same. Do these fittings need to have the Dali driver?
Hi, I’m not sure I understand the question. However, if you have RA2 select, you will benefit from a proper light fittings like the one I ve shown on the video. They will have to be MAINS dimmable to match ra2 select dimmers. RA2 select is not DALI compatible. Hope this helps ✌🏾
Hi I am an electrician (sole trader) I would like to get trained for luturon lighting programming and assembling the panel Do you know any private courses? If you can help I would appreciate it
Hahahah well let us know how it went and which part of the video helped you? Also next time you can just hire me for that sort of commissioning - easy! 😎
You mentioned topology and loop. Ironically, The one thing you cant do with DALI is LOOP the DALI lines. You can do all kinds of weird topologies but there shouldn't be any lines doubled up.
Correct! I mentioned that if not in this video then on the design video. As the installation is lutron related and they use the word “loop” on their module and documentation I had to use that same word to provide correct guidance when using their module. Again I agree with you Check out the DALI design video 👉🏾Lutron Homeworks QSX System Design with DALI Light Fittings // Adelux (NEW) [2022] ua-cam.com/video/Xnyh__tQ9Ks/v-deo.html
@@adeluxif you have lights in a room a fair distance away from the control panel you would obviously need to switch them locally, but you do not cover this!
![Lutron Homeworks QSX System Design with DALI Light Fittings // Adelux (NEW) [2022]](http://i.ytimg.com/vi/Xnyh__tQ9Ks/mqdefault.jpg)
![How to Design a Lutron Homeworks QSX System // Complete System Design Package [New] (June 2022)](/img/n.gif)
Thanks bro,👏👍
Big appreciation,i liked and subsribed💪💪
Thank you my new teacher wow fabulous!
Thanks for your comment and feedback. I enjoy producing those videos. Glad to hear it helps. Thanks again ✌🏾
Very nice clip! Expacting to watch your clip on DALI test & commissioning!
Thanks 🙏🏾 Stay tuned ! Working on it ✌🏾☮️
Excelent video. I have a question, how can I connect 5 lamps in a single driver?
Thanks! It depends of how much power your driver can provide vs the lamps. Normally your light supplier should indicate this info 👍🏾
@@adelux Do you know of any Spanish course in these device friend?
Je vous suis depuis le Maroc et je veux apprendre❤
Wow Maroc!! Un pays que jaime particulièrement!! 🙏🏾 merci pour le commentaire
Hi, Thank you for ur video..Whats is maximum cable distance allowable from dali driver to light fittings
Hi, very welcome. You should confirm that with your lighting / driver supplier 👍🏾
@@adelux Thank you so much for your reply. If any online course available for Lighting control system DALI and DMX system programming ,ready to join.
Hi, what's the size of cable using for control panel to Dali module? And Dali drive to devices cable size also?
I believe all size cables are explain on the video 👍🏾
Hi, I was watching one of your homeworks videos about floor lighting plans, I was wondering what software you or the architect used to create those lighting plans
Hi! I’m using Visio
Hi, We have the RA2 Select system provided to us by the builder and we have to buy the fittings for the same. Do these fittings need to have the Dali driver?
Hi, I’m not sure I understand the question. However, if you have RA2 select, you will benefit from a proper light fittings like the one I ve shown on the video. They will have to be MAINS dimmable to match ra2 select dimmers. RA2 select is not DALI compatible. Hope this helps ✌🏾
informative
Thanks 🙏🏾
Hi
I am an electrician (sole trader)
I would like to get trained for luturon lighting programming and assembling the panel
Do you know any private courses?
If you can help I would appreciate it
Thanks for your comment! Send me an email 📧👍🏾
Let see if this will help go blind in commisioning a super yacht ; )
Hahahah well let us know how it went and which part of the video helped you? Also next time you can just hire me for that sort of commissioning - easy! 😎
What build are you on, 😂 same here
You mentioned topology and loop. Ironically, The one thing you cant do with DALI is LOOP the DALI lines. You can do all kinds of weird topologies but there shouldn't be any lines doubled up.
Correct! I mentioned that if not in this video then on the design video. As the installation is lutron related and they use the word “loop” on their module and documentation I had to use that same word to provide correct guidance when using their module. Again I agree with you
Check out the DALI design video 👉🏾Lutron Homeworks QSX System Design with DALI Light Fittings // Adelux (NEW) [2022]
ua-cam.com/video/Xnyh__tQ9Ks/v-deo.html
Nothing on the local switching of a loop!!
Please expand your question ✌🏾
@@adeluxif you have lights in a room a fair distance away from the control panel you would obviously need to switch them locally, but you do not cover this!
Thank you for your input. I believe I mentioned Dali drivers have to powered separately from the distribution panel
@@adelux still doesn’t answer my question!
Sorry what’s your question exactly? I can only see « ! » in your comments no « ? »
Hahaha, you are also using wago terminal blocks
Off course I do !! 😂 very useful specially on my demo panel where I move, change and test equipment