Nov2020 - This tutorial just saved me... After doing a shoot at the beach today, my canon rebel t6i refused to turn on. After watching this vid, i left the camera with the sd card an battery compartments opened n also the lens mount. After few hours it worked like a charm. Thanks man🔥🔥🔥🔥
Thank you! Tried taking lens off and on, new sim card, charged old battery, bought new battery. Nothing worked until following your instructions...everything out, next morning started working.
3 Years Later And You Help Me Out , I Just Wanted To Point Out For My Camera It Was The Memory Card That Was Mess Up That’s Why The Camera Didn’t Come On , I Figured This Out By Putting The Same Memory Card In My Canon 5D Mark 3 And It Did The Samething But After Changing The Memory Card Both Camera Work Perfectly.
This worked for my old rebel xt, removed the lens, battery, CF card, and CR2016 battery for a couple hours. Then put it all back and it turned on and started working! Many thanks!
Thank you for this video!!! The problem on my Rebel T6 was that the lever (the microswitch or what you call the PIN) is not making contact with the bottom circuit when closing the battery lid. And so, this microswitch is actually staying up to the side rather than in the little in the rest position for the door's tooth to push it down (I assume). Again, your video shows the actual image of the micro lever and how it supposed to look (I assumed it was broken at first, but after digging the internet for an image to verify the way it supposed to look, I noticed that it's only bent??. Thanks again.The cam comes on, but I haven't fixed the problem yet. The clarity of this video on that lever helped understand. What I did: - Put in the battery and the memory card, turn the camera on (and leave it on).. THEN, push the pin down. This will show the screen on or a light to verify fit is the PIN the root of the problem. ----- -Screenshooting your video (on the microswitch) and tagging the part name for factual details could help route viewers here. The lighting on it is good! Take care! "Canon Rebel T6 camera"
I have a question, as I'm waiting for my camera to reset. My pin in the door sensor is pushed down. I can't even see it. If that pin is pushed all the way in (stuck) would that cause a further issue?
One other method.....take out battery... close battery door. Turn on camera...try to take pictures for a few minutes. This is supposed to drain the internal circuits from stored power and let the camera computer reboot. Basically the same idea as sitting overnight, just quicker. Saw a video about that method too.
This was my lastresort...I woke up today thinking that it would be solved but nothing happened.. Since my camera stopped at all on a summer day photo session and woke up after putting it in the freezer lol...just sent her back again there. Meanwhile I have the 90D since January 2021
(422 like now)To be honest, I sent my camera to the company's service center and they told me it could not be repaired. It is very old. It doesn't have a motherboard, so they called it junk. In fact, if I didn't watch your video, this good item would have been wasted. Thank you for giving life to my camera.🙏🤝
Hello, our 70D Canon Camera frezed and failed to turn on until now. Power is reaching the board but the on switch and screen are not displaying anything. Kindly we need help
Picked up a t6 having this exact issue where absolutely nothing works gonna leave it disassembled and hope for the best 🤞 how many hours did you leave it for?
My camera wasn't turning on (t5i) so I searched on youtube to see what it was and I found this video and when I went to turn on my camera it just decided to work. Canon is weird.
Worked for me too. I think what happened was I put the SD card into my Mac. I normally download the pictures to my PC and I think this caused an issue.
bro, i connect my canon dslr 750d to my pc using a cable, (without removing the sd card and put it in), and while i was copying the photos, suddenly my camera turn off by it self, and i thought the battery was low. So i decided to charge it, and when the battery was already charged, i try to put it in to my canon, and it won't turn on. Is connecting my canon to the pc cause the problem?
@@mavellawira You should remove the SD Card and follow the other steps shown on the video above. I'm telling you this solution works. Try it, let me know.
This is the second video I watched with the same solution. I simply don't understand why you can't put a plastic lens cover on the lense and a plastic cover on the body? Perhaps that should be tried before leaving it open all night?
i connect my canon dslr 750d to my pc using a cable, (without removing the sd card and put it in because there is no card slot on my pc), and while i was copying the photos, suddenly my camera turn off by it self, and i thought the battery was low. So i decided to charge it, and when the battery was already charged, i try to put it in to my canon, and it won't turn on. Is connecting my canon to the pc cause the problem?
@@Yyourself mine was on a very different firmware (ver. 4.0.2 004B(1f) before the update as it is a sample unit not a retail one. I don't know if you can help me fix that
Thanks this worked. However once I tried to switch the SD card it did the something and wont turn on again. I'm hoping leaving it for a few hours today will fix it again.
mine was freezing up and low battery so i decided to take out the battery and charged it. after charging it did not open. i hope letting it sit overnight without the battery, lens and card do the trick.
MY Eos M100 Wont turn on after i do my first try on china dummy battery and DC Core. Please somebody help me, this camera is meanful to me and my wife. i done with reset sd card, replace sd card, take of the lens, clean up lens conector, push and hold limiter switch on SD card & Battery deck, connect to computer, recharge battery, different battery. it doesnt work. help please i have no budget to repair this on camera service center. please repply my comment.
Nov2020 - This tutorial just saved me... After doing a shoot at the beach today, my canon rebel t6i refused to turn on. After watching this vid, i left the camera with the sd card an battery compartments opened n also the lens mount. After few hours it worked like a charm.
Thanks man🔥🔥🔥🔥
Thank you! Tried taking lens off and on, new sim card, charged old battery, bought new battery. Nothing worked until following your instructions...everything out, next morning started working.
Worked on my T7! Cried tears of joy when it came on. Thank you sooooo much!!
Great to hear!
I have a rebel eso t7 and I'm like crying cause it's not turning on gonna try this tonight
@@sarahkyart6565 did it work?
@@Yyourself Did you put the lens cap to the DSLR's body when you left it overnight?
@@musicandreference1275 nope, left it off
3 Years Later And You Help Me Out , I Just Wanted To Point Out For My Camera It Was The Memory Card That Was Mess Up That’s Why The Camera Didn’t Come On , I Figured This Out By Putting The Same Memory Card In My Canon 5D Mark 3 And It Did The Samething But After Changing The Memory Card Both Camera Work Perfectly.
Gonna try this one hoping it will work for me too🙏
This worked for my old rebel xt, removed the lens, battery, CF card, and CR2016 battery for a couple hours. Then put it all back and it turned on and started working! Many thanks!
Thank you for this video!!! The problem on my Rebel T6 was that the lever (the microswitch or what you call the PIN) is not making contact with the bottom circuit when closing the battery lid. And so, this microswitch is actually staying up to the side rather than in the little in the rest position for the door's tooth to push it down (I assume). Again, your video shows the actual image of the micro lever and how it supposed to look (I assumed it was broken at first, but after digging the internet for an image to verify the way it supposed to look, I noticed that it's only bent??. Thanks again.The cam comes on, but I haven't fixed the problem yet. The clarity of this video on that lever helped understand. What I did: - Put in the battery and the memory card, turn the camera on (and leave it on).. THEN, push the pin down. This will show the screen on or a light to verify fit is the PIN the root of the problem. ----- -Screenshooting your video (on the microswitch) and tagging the part name for factual details could help route viewers here. The lighting on it is good! Take care! "Canon Rebel T6 camera"
What was the fix...pls updatr..
Canon Rebel T6. Took the battery door off to use a battery base. Mystified when the camera quit working. Putting the door back on worked. Magic.
Thanks!! My problem was solved. The battery latch pin you mentioned was the problem!!
I have a question, as I'm waiting for my camera to reset. My pin in the door sensor is pushed down. I can't even see it. If that pin is pushed all the way in (stuck) would that cause a further issue?
My favorite part of the video was every time you said “that didn’t work”
honest tutorial. I tried and it didn't work either. 🤔
toca o disco 😂 the first suggestion you gave worked for me so thank you!
thanks for showing all the different methods of making it work
Thank you very much very helpfull bro....u save my life
Thank you!!!!! It worked for my canon 60D. Thank you so much you are my hero ❤️🖤❤️
Thanksssss Broooo!!!! It worked for my canon 700d(rebel t5i)❤❤❤
I just cant thank you enough, you saved my life💝
I have the same one how many hours did you leave it for?
@@jaredsmith4476 bro this is an old comment so i don't remember exactly but I think it was overnight
One other method.....take out battery... close battery door. Turn on camera...try to take pictures for a few minutes. This is supposed to drain the internal circuits from stored power and let the camera computer reboot. Basically the same idea as sitting overnight, just quicker. Saw a video about that method too.
How would you took a picture if the battery wasn't even there
This was my lastresort...I woke up today thinking that it would be solved but nothing happened.. Since my camera stopped at all on a summer day photo session and woke up after putting it in the freezer lol...just sent her back again there. Meanwhile I have the 90D since January 2021
I love that you should other fixes, and I hope one of these works for me. Thanks
A big thumbs up for you bruh! It worked with me (first solution that worked with u as well). I tried it with canon eos 450d, and yeah! It's fixed!
Hi do you know if this works for different model cameras ( I own a canon eos rebel xt)
Do you leave the camera "on" overnight or is it "off" (no battery, no Memory, no lens)?
Hello i have the same question as you. Did it work for you and if yes did you leave it on or off overnight?
I've tried everything, and nothing worked - until I found this video. Thanks for helping!
The pin thing worked!!!! Thanks!!!
(422 like now)To be honest, I sent my camera to the company's service center and they told me it could not be repaired. It is very old. It doesn't have a motherboard, so they called it junk. In fact, if I didn't watch your video, this good item would have been wasted. Thank you for giving life to my camera.🙏🤝
Happy to hear that!
Thank you - the pin in the battery fix worked for me! So easy once you show the pin
Thanks man you saved my camera's life❤❤❤
Hello, our 70D Canon Camera frezed and failed to turn on until now. Power is reaching the board but the on switch and screen are not displaying anything. Kindly we need help
Picked up a t6 having this exact issue where absolutely nothing works gonna leave it disassembled and hope for the best 🤞 how many hours did you leave it for?
Overnight
My camera wasn't turning on (t5i) so I searched on youtube to see what it was and I found this video and when I went to turn on my camera it just decided to work. Canon is weird.
Wow OMG, great men, my camera working now, tk
Did this work for anybody that has a g7x mark ii camera ?
No😫😫 did anything work for u?
Worked for me too. I think what happened was I put the SD card into my Mac. I normally download the pictures to my PC and I think this caused an issue.
bro, i connect my canon dslr 750d to my pc using a cable, (without removing the sd card and put it in), and while i was copying the photos, suddenly my camera turn off by it self, and i thought the battery was low. So i decided to charge it, and when the battery was already charged, i try to put it in to my canon, and it won't turn on. Is connecting my canon to the pc cause the problem?
@@mavellawira You should remove the SD Card and follow the other steps shown on the video above. I'm telling you this solution works. Try it, let me know.
@@mavellawira did you manage do fix this? I have the same problem.
@@mavellawira Yeah the canon stopped turning on after I put the SD card in the PC and back into the camera
Thanks, man it worked for my canon 650d (rebel t4i)❤❤❤
Love reading these comments!
Thank you so much😊 Pushing the pin in worked for me
This is the second video I watched with the same solution. I simply don't understand why you can't put a plastic lens cover on the lense and a plastic cover on the body? Perhaps that should be tried before leaving it open all night?
thanks bro, u saved my cam. thanks alot...
thanks brooooooo you saved my lifeee❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
My camera is canon 1300d same problem ur process not working for me tell another process
I have the same camera, but I lost the battery cover.. can this be a reason why my camera isn’t turning on?
Yep, thats probably the reason
Hi i got same problem with my 1300D i cant turn on please help me
i connect my canon dslr 750d to my pc using a cable, (without removing the sd card and put it in because there is no card slot on my pc), and while i was copying the photos, suddenly my camera turn off by it self, and i thought the battery was low. So i decided to charge it, and when the battery was already charged, i try to put it in to my canon, and it won't turn on. Is connecting my canon to the pc cause the problem?
The same thing happened to my 600d, it won't turn on after connecting a PC
You let everything opened, no lid on the sensor?
Yep
@@Yyourself mine was on a very different firmware (ver. 4.0.2 004B(1f) before the update as it is a sample unit not a retail one. I don't know if you can help me fix that
Going to try this soon thank you for a great video
Thanks this worked. However once I tried to switch the SD card it did the something and wont turn on again. I'm hoping leaving it for a few hours today will fix it again.
mine was freezing up and low battery so i decided to take out the battery and charged it. after charging it did not open. i hope letting it sit overnight without the battery, lens and card do the trick.
It didnt
Do you leave the switch on or off
Off
MY Eos M100 Wont turn on after i do my first try on china dummy battery and DC Core. Please somebody help me, this camera is meanful to me and my wife. i done with reset sd card, replace sd card, take of the lens, clean up lens conector, push and hold limiter switch on SD card & Battery deck, connect to computer, recharge battery, different battery. it doesnt work. help please i have no budget to repair this on camera service center. please repply my comment.
exactly the same here. Have you had it repaired?
Trying this with my T6i. My kids left it on inside the case for a long time...
Not work Bro, I've tried all.
What will happen if the pin is broken! Please let me know! Because I broke it 😒
This video really works! ❤️
Thanks man will try this soon :)
did it work for you? having same problem
You have to love a simple fix! I just started a channel about repairing things, feel free to watch it and let me know what you think!
Nun of this worked for me specially the last part
Thanks man. It worked.
this helped so much thanks!!
So what's actually the issue with these Canon cameras?
I think the camera kind of locks itself up after certain amount of time being left on. (like weeks)
Was it not that your battery was just dead because the camera was on so long?
No, because charging the battery didn't work
thank you
i sure hope this actually works
every time i try and troubleshoot nothing ever works
Alguien que hable español ?
it doesn't make any sense.
But I'll try it anyway🤦♂️ thanks
Didn't work for me :(
Nothing worked for my 5D MKIII. Sent it back for a refund. Canon 🤦🏾♂️
I it tri no work bro
The battery was just dead lol
Didn't work
:(
thank this is legit
It’s called magic.
Fing rediculous.
Thanks it worked