3D printed dragon flight test
Вставка
- Опубліковано 29 вер 2024
- This gliding dragon took part in the Printables Make It Fly contest.
3D model: Flying Night Dragon by Sevro www.printables...
- - - - - - - - - - - - - - - - - -
Twitter: / mihaidesigns
Instagram: / mihaidesigns
Patreon / mihaidesigns
Buy me a coffee mihaid.com/coffee
mihaidesigns.com
#mihaidesigns #shorts
Bambu Lab X1 3D printer (affiliate link) bit.ly/bambu-x1-cc
3D model: Flying Night Dragon by Sevro www.printables.com/model/404447-flying-night-dragon-v2-head-update
What 3d printer do you use?
How mutch dose these printers cost to buy if your living in UK
@@Cryo_CruisE 999⁹099999m9908888888
Is it Bambu Lab X1-Carbon Combo 3D Printer? or any other
,
¹❤Pubg gelcekPubg gelcek❤❤😢
The “hooray” at the end was gold.
fr
Ong
Hooray is good I agree
Dragon print: ⭐️
Video Dialogue: ⭐️⭐️⭐️⭐️⭐️
the peel: ⭐⭐⭐⭐⭐⭐⭐⭐
The Landing: ⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️
@@cheeseman7162😊😊0😊0l0l0z
Overall :😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
@@cheesu736 yessir it is the best
“Hooray” got me 😂
I used to make paper versions of these as a kid!!! I'd fly them from the top of my grandma's deck. This brought back so many memories! To make better fliers, I reccomend angling the wings back slightly and bending them and the tail upwards
Hooray- motivation is key as we see here it is greatly presented as a triumph!🎉
The reason it does that because, the wind blow hard on a thin printed Dragon. since it is very Thin It can easily blowed away.
hiccup haddock noted:
The throw was far too fast, the lift bent the wings up and sent it into a vertical stall, thus causing the pitiful loop, fall, and flat spin on the way down. It could benefit from a yaw stabilizer as well as some fortification to the leading edge of the wings for less flimsiness
The neon green night fury has grace. In the sense that a goose with a clipped wing has grace.
*dragon dies*
“Hooray!”
that thing pulled a toothless at the end there!
Now we have 3d printed plastic getting thrown into nature! : D
I guess that's why dragons aren't with us anymore...
Filipinos when they hear the hooray: ANG SAKIT NUN INDEED
The guy at the bottom:
ALIEN DRAGON?!
"Hooray! 😀"
I feel the disappointment in my bones.
Its so accurate
“ oh sure man will fly one day ha ha ha just like a rock” -Archimedes
Bro rlly said THE AIRPLANE IS GOIN DOWN
Success! It flew straight to the ground 😂
Your wings probably got ever so slightly bent while you're peeling them off the plate try using a scraper at a 45° angle in failing that bending the ailerons a little bit
well i mean, it did fall in a forest. that's kind of accurate
"Thank you for nothing, you useless piece of plastic. Urh....reptile...urh...I screwed up the line again didn't I?"
Bro got that npc hooray emote 💀
Front needs a bit more weight and the wings need to tilt slightly upwards
Dw guys, that's just Toothless.
Bro did the Huggy wuggy fall down
Nah that thing is toothless in the air before hiccup helped him 😂
At that moment, Smaug was no more
El golen nesesita un oscar🙂xd🎉
R.I.P dragon 🫡
It’s a night fury ITS TOOTHLESS
You need a horizontal stabilizer and a little bit of weight on the nose.
the fact that it literally flies into the wall
depressing i know
Fly❌️ Fall✅️
just like the movie!
💡 Modify to *ADD a HOOK* -
Тест драйв, если бы Иккинг тогда не успел вернуться в седло:
Here's the mistake he's still got all his tail and no rider
It flies like me
You should sell them, I would buy one
Hooreyyy....
CG is a thing you know?
the same thing that happens to any "glider" i have ever printed.. even if its lite weight pla..
Heat the wings up a little and bend them up a little
That’s kind of like when toothless crashed into the forest#parallel
Maybe try some more thicker or heavier film
Looks like war bat
dragon : *fly* WowoOowowoo *BONK* NOOOoOOOOo
The horray at the end 😂😂😂😂
Maybe to create more
Just look at the shape and balance 🧠🧠😮🎉
Where did you learn to fly?
“Hurray😃”
What filament type and settings are you using??
What going on with the 3d printer people and all the dragons?
I don't get it
¡GREEN FURY!
It has a rubberband launch hook on the bottom though??
Needed some nose weight, like a paperclip?
Hooray 🎉🎉 :D 🎉🎉
Just like in the movie 😂😂😂😂
Hurray!
It’s toothless!
Broski. It's a glider, don't throw it.
*“How to **-Train-** Print Your Dragon”*
Lol
*"How To Die Your Dragon"*
😂
Facts
How not to print your dragon?
It flies like a submarine
Very good
I wonder how will it act in water
It Flies Alright Just Like a Rock Owl Starts Laughing 🦉😂
And as we all know submarines aren't good at flying
It goes down like one too
Are you sure Toothless didn't reincarnate as a 3d printed dragon just to relive through his events from his previous life?
Hella underrated comment.
BHAHAHA
HAHAHA
ACTUALLLY FOUL.
It needs to be fixed. Where's the 3d printed hiccup??
Ah yes, night dragon, my favorite *NON-COPYRIGHTED* dragon!
Wdym?😂
@@YaNeK92the pattern is a nightfury from HTTYD, they’re joking about how it’s labeled the “night dragon” to avoid copyright
“Thank you for nothing, you useless reptile…”
- Hiccup Haddock, 2010
104 likes and no comments?! Time to change that, this comment is a literal Gem and I love it
YES 😂
Best thing in the movie lol
Actually 900 AD
Im so glad some one thought of this!! HA
That was the saddest "hurray" i've ever heard
It had me dying😂
He trying to keep his inside pain
Files as straight as a wingless pigeon
That was painful 😵😵
@@hampter909 😢🎉🎉🎉🎉❤❤❤❤❤❤😊
"For a brick he flew pretty well!" Sgt Johnson
W halo reference
literally whenever Toothless tried to fly on his own in the first movie
“Night Dragon” like I wouldn’t know a Night Fury from a mile away
I actually had high hopes😂
😂😂😂
zno
😂😂😂😂😂😂
Yes 😂😂😂
😂😂😂yes😂😂😂❤😂😂😂
Omg he recreated the scene perfectly
What "scene"
@@SlayCam the one from how to train your dragon when toothless falls
Oh@@ninalove8521
I was thinking the plane from
The Sword in the Stone
Hi, I'm new to the channel, your dragon was awesome
I've been making these out of paper for YEARS. They're decent gliders when you bend the paper to give it more stability (and use a metal weight at the head).
That dragon crashed harder than my expectations
HTTYD 1 hiccup and toothless bonding in a nutshell
-'How to train your dragon' *if they didn't train their dragons*
Well it being unable to fly is pretty accurate though
fun fact - the model of that dragon is a night fury AKA toothless from httyd (how to train your dragon) and the model unable to fly itself is accurate because toothless has a fake right tail and cant fly without hiccup so its a partial success
@@mayurmahamuni9860 yeah that’s pretty obvious to anyone who’s seen the movie which we clearly have
more like "How to train your dragon?"
As a *huge* httyd fan, this is very true- kinda like when hiccup shot down toothless 💀
The reason why it didn’t fly as intended is because the dragon’s center of mass is position behind the center of pressure, leading to immediately flip upwards. It spun around in circles because it had no vertical stabilizer to keep it straight. Hope this helps!
Actually, it's because a young man wanted to prove himself to his father and shot it out of the sky.
I thought that dragon was going to fly like a boss 😂
Im wheezing😂😂😂😂
Same
I seen someone else bend the sails on its tail and behind it's wings and it flew better!
I don't audibly laugh at many videos but that "Hurray" at the end got me XD
Me to!
sameeee i needed that
The *hurray!* after the dragon entered a literal death flatspin got me sm 😂
Xxxxxxx😅😂❤
@@punamnishaduqu3060l6
Toothless:"I NEED HICCUP TO FLY👹"
:P
That 'hurray' got me good 😂😂😂
Lmao
Dragon: Mayday Mayday we are going down!
Creator: Hooray!
-
I want to 3D print… I will get there tho!❤
@AptMantis2278same!
That hurray will be a meme
That "hurray" got me
the new how to train your dragon series is looking fire
This leak of the love action how to train your dragon sure is something
We finally know how Hiccup shot Toothless 😂😂😂😂
nah that was after hiccup shot toothless
😂😂👍
The dragon was like: MAYDAY MAYDAY-💀💀💀
😂😂😂
taking it off the platform was surely satisfying
That thing looks like Toothless, AWESOME!
It's a night fury
and it flies like toothless without the second tail fin....
That "hurray" was very personal...
"Hurray😔"
I died laughing when he saw it hit the wall multiple times then he just said hooray, that was the most sarcastic hooray ever, hilarious
This reminds me of what gobber said, “A downed dragon, is a Dead dragon.”
every paper plane I've ever folded:
Do one in black for toothless if u have the color black
I love your sense of humour 🤣
Love how it spun down, like it got dizzy after that slam into the wall 😅
If it went on the road:
Car:ouch- WAIT A DRAGON? NAH I THOUGHT THOSE WERE GONE! *goes 100 mph now*