Here's a great story. I did the procedure as presented. When i pressed the button on my new key fobs, the blinkers flashed to show they were programmed. But, neither one worked. As a bonus, my original working key fob no longer works. So, I got that going for me.
When I lock my doors from the inside with my driver side lock buttons my diver side lock has never worked I have to manually set it would that make a difference to not let me program when you unlock and unlock procedure to program the key
Hmmm that’s a good question. It might not let you do the programming since the electric motor isn’t working for the lock. I’m not sure if the bcm would need to see that input for the procedure to start.
I’m not sure exactly how you would disconnect it from the car. Only thing I could really think of is to use a different key fob and program that one to the car.
Sorry for the super later reply. So once it’s in acc mode, it should flash one you hit a button on the key fob you are programming. Also make sure all doors are closed and locked before doing the procedure. Hope this helps
Here's a great story. I did the procedure as presented. When i pressed the button on my new key fobs, the blinkers flashed to show they were programmed. But, neither one worked. As a bonus, my original working key fob no longer works. So, I got that going for me.
Oh wow I’m sorry to hear that it worked that way for you. Have you been able to try again to see if it will fix it?
@builtbybeez yes. I figured out my car has a quirk to it. After I disconnected the battery and reconnected, both of the fobs started working.
It took a lot of trial and error and about a month of experimenting.
@@elkman7529 oh wow! That would have been the last thing I would have thought about. Well I’m glad to hear that it is working for you now
@@builtbybeez thank you, and thanks for the video!
Worked like a charm. Thank you.
Awesome I’m glad it worked for you!
Thank you very helpful
You’re welcome glad that I could help
Just got these and they work thanks Beezy!
Glad to hear that they work for you!
Good video, with useful info 👍🏾
Thanks bro I appreciate it. I love how easy it is to program the remotes
When I lock my doors from the inside with my driver side lock buttons my diver side lock has never worked I have to manually set it would that make a difference to not let me program when you unlock and unlock procedure to program the key
Hmmm that’s a good question. It might not let you do the programming since the electric motor isn’t working for the lock. I’m not sure if the bcm would need to see that input for the procedure to start.
Do yk how to disconnect it from the car ? connected one to my other z now it unlocks both .-.
I’m not sure exactly how you would disconnect it from the car. Only thing I could really think of is to use a different key fob and program that one to the car.
Hi i currently have only the key but no key fob, can I do this if I buy the fob and just follow the steps?
Yes
Yes it should still work for you
Mine flashed but when put in accessory’s mode it doesn’t flash again… Iv done it 15 times
Sorry for the super later reply. So once it’s in acc mode, it should flash one you hit a button on the key fob you are programming. Also make sure all doors are closed and locked before doing the procedure. Hope this helps
Hello, what if it doesnt flash?? HELP
Try going a little slower with the procedure to make sure all the steps are done correctly
Do they still work?
Yes they have still been working just fine
That's not keyless entry
How is it not?