Will It Run?! Putting My Free Twin Turbo BMW Back Together - E90 335i N54
Вставка
- Опубліковано 9 тра 2024
- In this video we put this BMW back together and we finally fire it up!
This is my 2008 BMW 335i with the N54 engine. It was given to me for free from a viewer!
I got my hands on it while it was in pieces, now we get to put it all back together!
This ones got lots of tips and tricks for the N54 owners out there, I hope you enjoy :)
Thanks for watching!!!
If you’d like to support the channel, you can join my UA-cam membership program, it’s the “JOIN” button on this video or my channel homepage, or you use this link here!
/ @dayoffdiy
If Patreon is more your speed, we got one of those too!
/ dayoffdiy
TOOLS USED:
Vevor 5K Lb. Car Lift
amzn.to/49zMiv9
Magnetic 1/4" 11mm Deep Socket
amzn.to/3JTG1zl
Magnetic 1/4" 10mm Deep Socket
amzn.to/44Debky
BMW Oil Filter Cap Tool
amzn.to/3SG3UzE
Red Sotch Brite
amzn.to/3w5K6N7
3/8" Torque Wrench
amzn.to/3wEoUOZ
14mm 12 Pt. Spark Plug Socket
amzn.to/3UDeS8Y
Boroscope Camera
amzn.to/3JTMNFd - Авто та транспорт
Fuel pump under the back seat is the issue here. Wouldn't be surprised if you take the rear bottom seat out and find fuel leaking from the pump housing and spilling onto the fuel tank.
VDO/Continental had a bad batch on E9x when these cars were built, the plastic is known for cracking and you lose pressure.
FCP has the updated VDO units, they're all good and don't suffer the same fate.
I saw the video come up and saw it is only for members and though "Oh too bad I guess I'll have to miss this one. Then after seeing it again I thought "Wait a TIC! I became a member last week!!" LOL.
Appreciate you Greg, youre awesome!!! when i schedule my uploads i set them to members first :)
Ur missing the vacuum canisters that sit next to the coolant tank
I totally am! got em in my ebay cart. actually, ill buy them right now :)
Cried when u took the battery out the e46 to put into a e92 .e46 need more love
Hi Alec,
Be sure to set every fuel injector value with Ista, every fuel injector has a value written, this could also cause a rough idle
new video is out and i do just that!
She's a runner!🎉
shes a runnerrrrrr!!!
Love to see the n54 breathing at least
i love your vibe you always put out, always makes my day better and thank you for getting "Brother ughhh" stuck in my head hehe
means a lot! thank you!!!
Great video! Glad engine started .. Whoop Whoop!
I was looking forward to this one and it didn't disappoint! As an N54 owner I love this content and I can't wait for you to get this all fixed up!
Love the video. Been waiting to see what shape that one is in. Can’t wait to see the fix.
Great progress!
hell yeah, interesting end looking forward to more diags
Uhhh. What's that brother?? Good vid brother! Love your content
Those things have one use spark plugs. The length of the porcelain insulator makes it extra brittle and causes misfires when reused. It’s a pain, I know
Nice work very interesting
Excited for the next one man! Running car is a W
SHES A RUNNER!!!
Coming together well!
This project reminds me of something my friend did years ago. He bought a 1990-ish Pontiac Sunbird Turbo (yes turbo!). It promptly blew a head gasket after purchase. He then took it upon himself to start to dismantle the engine by himself and just threw all the bolts in a coffee can and car parts across my garage. The car then sat in my garage for a year or to when he sent me his credit card asking me to put it back together.
I spent a good part of the day organizing all the engine parts and bolts. Got it back together after the engine was rebuilt and only had a small box of left over bolts.
LOL classic! She is coming together pretty well! Just posted a new update today. Hope all is well ROB!!!
Heck yah. Just made an adult beverage and def gonna tune in!
Great job getting it started
Let’s get it 💪🏽
yeah buddy!!!
Glad to see it running! Looking forward to seeing you fix the issues:) Great video man👌🏼
just posted the new update!!!
“What does the fault say?” Reeek ke keke! 😂
glad someone caught that :)
Great video Alec !
thanks chad!
Speedy Taco!!!! 🌮🌮
Finger Punch! Finger Punch!! Oooow.😂
Another great video, Alec! 🤙
That's some good progress here Alec! I have faith in you for getting it to work, it's probably easier than the E30!
wayyyyy easier than the E30 and way more fun for me !
It makes me wonder how the valves look on my 125.000 miles S55 engine…
N55s and S55s dont suffer from the same carbon buildup issues as the N54, however I have done them before on an N55, its not nearly as common or problematic
Nice job!
Mannnn those wheels are horrendous 😂😂😂😂
they need some love. just posted an update!
“NEVER HAVE TO WORRY ABOUT DROPPING YOUR 🥜🥜🥜” shirts coming soon😃
😅😅
Hell yeah, sneak preview! Settling in to watch as we speak.
EDIT: Just got to the end. Fucking hell that's smoky. Honestly sounded like someone was shaking a can of coins when you fired it up. Looks like she will be some work lol.
soooo smoky!!! LOL! just posted a new update, hope you enjoy :)
@@DayOffDIY Gonna wait to watch it after work tonight! Hell yeah.
Use 5w-40 it’s a BMW thing check oil level through computer every month just because it’s 5w30 it’ll prob burn it probably leak it too
i gotta disagree, ive used 5-30 for YEARS at the shop and in my cars, if your engine tolerances are within spec and its not consuming, theres no reason to run 5-40, however... these N54s sometimes do prefer a 5-40 but its not across all BMW engines. S54, S62, S65, S85 all use 10-60 and id still use 5-30 in an M52, M54, M62, N62 etc
"Sage Evacuate!" lol
Hey my friend the torque spec on those valve covers is only 8.5 NM or 75 INCH pounds. As well the torque sequence is important. This thing will leak on you big time of you don't do it EXACTLY the way it's needed. There's a ton of info online as well as the torque pattern. Inside to outside. Are you missing the vacuum canisters? They go right in front left side right in front of the coolant tank. and that's where the vacuum lines are supposed to go to first then to the solenoids. I know you know all this by now but I can't help but jump in LOL. Sorry. I guess you know by now anything I could say so I should just shut my gob now. LOL. I LOVE THE VIDEO! Thank you! I thought the INPA said your Low pressure was too low. Meaning a fault from the tank pump and not the HPFP.. Wish I was there to help ya LOL. But you know what to do!
I did my valve cover gasket on my n54 and I just tightened it down with feel and didn’t do a start pattern never has an issue.
Hey Greg! Yeah i think the plastic covers call for 9nm but 10 will be fine :) i will monitor the gasket but i think itll be okay. I shouldve gone with a different torque sequence but ive had great luck with my VCGs in the past
I totally am missing the vacuum canisters! i just ordered them up.
Just posted an update that you are going to love, ill be lookin for your comment on the new one ! cheers!!!
Magnetic 11mm, nice
its a game changer!
Or put a little piece of paper between the nut and socket.
Mine has an abs light and break light. definetly a break fluid leak
On the F31, the brake light was yellow for a bad ABS sensor. Red when it had low brake fluid (which was a leak). I don't know if these colors also apply to the E90.
Looking forward to seeing you straighten this one out, feels like a real step up for the channel! She sounded NASTY before limp mode lol. Does the M54 use the same 11mm setup for the intake?planning to rip mine out & refresh everything underneath there (going to use your second ever vid for guidance)
The m54 should be similar but I don’t believe the studs are removable, although it should all be 11mm hardware
Excited to keep this one rolling Ross! Glad you like it!
Well Done 👍 Hope the smoke is from the Turbos. The mag 11mm is a great tip, any chain noise?
zero chain noise!
Ayo members only!? Boutta go grab my jacket lol
BRO... MEMBERS ONLY JACKETS WOULD BE SOOOO SICK!
@@DayOffDIY THATS IT WE NEED MEMBERS ONLY JACKETS FOR THE CHANNEL WTF!
God watching this video remind me of what a turd and pain in the ass the n54 is to work on. BMW has come so so far now with the b58 and s58 it’s not even comparable. With b58s nearing 10 years old now as well there’s really no reason to put yourself through the tortures of n54 ownership anymore lol… just save up a little and get yourself a b58 car. Even if you have a small car payment it’s still gonna be less than the parts it takes to keep an n54 going and able to keep up with the b58. Awesome series man keep it up. Most underrated UA-camr on the tube!
Appreciate it Robert! ya know i really dont have too much experience with the b58s, didnt see too many before i left the shop so id like to get my hands on one someday. You cant turn down a free N54 though! they are better than the N55s in my opinion. I trust them more
@@DayOffDIY definitely wouldn’t turn down a free one that has good internals still. And I love this series, have all notifications for you turned on :) I agree the rotating assembly on the n54 is more stout, however the n55 ewg (not pwg) cars and the n55 found in the non comp m2 are also very good engines that I wouldn’t discount. They just need more frequent oil changes. I’m still team b58 tho, they’re incredible and the best of both worlds and a joy to work on for the most part.
Hey. Love your videos. jusy wanted to know if you can help me with a problem on my E46. I replaced my oil filter housing gasket a few months ago with proper torque yet when I drive I still see some leaking occuring from there. I made sure to tighten the bolts as well. I got a viton OFHG that was supposed to be better but do I just go OEM?
oem is always best in my opinion. did you replace the vanos oil line? replaced the washers and torqued it to spec? id check those and the oil pressure sensor.
@@DayOffDIY Already did the Vanos line from ECS tuning which has been super solid with no leaks. I'll be getting a budget torque wrench with new hardware just in case as before I changed it I'm pretty sure those are the old bolts just in case it's those.
Woow she sounds... terrible 😅
Well at least she is running and is in good hands ;)
N1 progress alec.
That magnetic Sockets are gamechanging man. Definitely need to get some. Do you have an recommendation of which ones i should look for?
Now i am really pumped to see further progress 😆
N1 Video thanks a lot and good job on that one 💪
Stay halthy and safe brother 👊💪
theyre the best! i added some links in the description for magnetic sockets that are affordable.
Just uploaded a new update! I hope you ENJOY!!! :)
Cranking didn’t sound good. You need to do a compression test.
new update is out :)
I don't know what ragged out 335's sell for out there Alec but in the midwest you can buy them all day long for $3500. I know you got the car for free but don't bury yourself in a free car.
Blue vacuum hose has to go
What’s up man I might pick up a e46 330i 5 speed tomorrow at my local auction.but it was in a front end accident and I’m wondering if the parts are the same for all 3 series as long as they are in the same family. Like if I go to my local junk yard and get a bumper/fender/hood for a 328i will it fit my 330i?
Only has 125k miles engine and gearbox are healthy but the radiator support is pushed in a bit and the coolant reservoir is making contact with the serpentine belt and it cut a gash into it. If it goes for under $1,000 I’ll pick it up 👍🏼 I can just pull the front end to get it back into its original position as much as possible. Bumper is only cracked a little bit no major damage
for the most part yeah like all E46 parts should be interchangable!
Was the fuel pressure sensor at fault? Not OE?
new video is out with the issue :)
Hey Alec man... I bought a BMW E90 with the N52B25A engine on it a few weeks ago. It's burning oil like crazy... initially 1 quart every 200 miles or so... I did an oil change on it and put Liqui Moly 5w-40 in. It's a bit better but it's still like 1 quart every 350 miles. CCV seems fine, there's just a little bit of vacuum on the crankcase. I've read the piston rings and oil return holes on this engine are crap... any suggestions? :(
dang thats a bummer! first id go after the CCV if its showing signs, they can cause excess oil consumption. If there is a noticable amount of vacuum at the oil cap while idling it could be faulty. i use a manometer to measure vacuum if i need to. next thing id do is use a boroscope and go down the spark plug holes to look at the valves while they are open and closed. If the engine is warm, NOT HOT, you can use a boroscope to see if there is any evidence of the valve seals leaking down into the combustion chamber. you can also inspect the tops of the piston for signs of oil consumption via rings. google piston washing for an example of what the piston looks like when it comes from the bottom. you can also leak down test the engine, or another way to check for valve seals leaking is to let the car idle and get hot for 5-10 minutes, then snap the throttle and rev the engine up quickly to 5-6k and check for a smoke cloud out of the exhaust. hope this helps!
@@DayOffDIY hey again Alec. I bought from a dealer and here in Germany the dealer is obliged to fix issues the car had within the first 6 months. I struck a deal with the dealer to renew vslve stem seals, oil pan gasket, head gasket and piston rings for 600 bucks. He says also we could put in new pistons for additional 400 bucks. Sounds like a good deal to me. I think I'm gonna pull the trigger on it and see what happens. I don't have a lot of cash right now but if the engine is coming apart I think I'd rather have it done right the first time.
You don't need to worry about dropping your nuts😂
do a manual car giveaway they are slowly dying out
id love to! once we get some more $$
@@DayOffDIY good point!!! We all broke out here