Quick and accurate review of the set up and function of the G0771Z Hybrid Table saw from Grizzly. Facebook: / mlwworks www.mountlenaw... Etsy: www.etsy.com/s... Instagram: / chris_mlww
Thanks for the upload man. Been driving myself crazy looking at all the different table saws out there. This video pushed me over the fence to buy grizzly. Thanks.
This Grizzly saw is a 2 HP not 1-3/4. This saw has more power and cuts better than all of the 1-3/4 HP saws like the Sawstop contractor saw, Powematic hybrid saw, Baileigh industrial hybrid saw, laguna hybrid saw, and Rikon hybrid saw. The Grizzly is also cheaper than every one of those to boot. The only other saws that are comparable in power and price are the Shop Fox and Woodtek hybrid saws, but even they are a bit more expensive though. This Grizzly is hands down one of the best hybrid saws on the market.
Can you elaborate on moving the fence "one bolt hole"? How much was that and what was the rip capacity then? Looks like you put it back to original position.
I've had nothing but issues from one of their products. My wife and I drove over 5 hours, and spent over $1200 at the Grizzly showroom in Missouri. Honestly the showroom is amazing. The product I got...not so much. I've had over 10 separate issues including defective, and back ordered parts sent to me. Grizzly did offer me $100 to keep the pos 😂😂😂. I like high quality tools, and won't hesitate to spend the money on them. SCM, felder, festool, saw stop etc. I like decent hand tools such as snap on, Milwaukee, dewalt, and I even think husky is decent due to being able to swap tools easily when they break one the job. We even have some harbor freight tools that I think are very very good. My experience with grizzly has been that of a dollar store drill press. Not to mention they will not post my review on their actual website.
WeLoveWoodworking sorry to hear that. Two table saws and a jointer have worked great for me. Great customer service, fast shipping and great warranty’s (that I haven’t had to use). Sorry you’ve had such a bad experience
I don't have this saw anymore, but I do have the newest version of this saw. Yes, I would still highly recommend it over the competition at its price point.
would you purchase this saw again,,i have been looking at this one and the delta 36-735 that lowes sells and I like the fence system on delta but I have heard horror stories about deltas customer service,,,but if you look at the you tube videos on the saw everyone seems to not have any complaints other than the instructions aren't too good
jeff oldham deltas have, and continue to be great saws. However, you do tend to pay a considerable bit more for them. As I’ve said Before, it’s my honest opinion that no one can touch the quality of this saw in this price bracket. In short, I’d absolutely buy it again
Little late comment, but I was considering getting this saw and the only concern I have is the fence/aluminum rails. Have you found that to be an issue at all?
ri mar they went together great for me. They take some time, making some adjustments, but you can get them perfect if you invest the time. And it's been about 3 months.
that table and trunnion assembly is exactly the same as my rigid table saw. i know this because i just had mine apart for bearing replacements. the blade insert is the same. the cast top looks identical. i wonder if the motors are the same?
I just replace my r4512 with this and I think its all the same like you mentioned. My r4512 miter slots were not T-slots but otherwise the motor is identical
Ohio Outdoors well actually they are not the same but share a bit of similarities only in the top casting but not underneath. The Ridgid is using trunnions that mount to the cast iron top and the Grizzly uses cabinet mounted trunnions. Now the tops are very similar and possibly made in the same factory but again there are slight differences underneath because of the mounting locations for the trunnions. I believe the throat plates are the same thickness so again possibly same factory but Grizzly takes it up a notch by mounting the trunnions in the cabinet and not mounting them to the top underneath as the Ridgid. Both great saws but again trunnion assembly isn’t the same. A quick google search will show the Ridgid using trunnions mounted to the bottom of the cast iron top and the Grizzly will show the the trunnions mounted to the cabinet. Now the previous model the Grizzly G0777 without the “Z” did use trunnions mounted to the cast iron top like the Ridgid but the newer model they upgraded the trunnions to cabinet mounted trunnions. This is assuming your speaking of the R4512 or the newer R4520. I believe the older model the R4511 possibly used trunnions mounted to the cabinet but if it is the R4511 with cabinet mounted trunnions than the tops are not the same.
Zachary Dixon totally incorrect Zachary, a quick google search will show without a doubt that the Ridgid R4512 uses trunnions mounted to the cast iron top and not to the cabinet like the Grizzly G0771Z.
![Lp. Сердце Вселенной #1 НАЧАЛО ПУТЕШЕСТВИЯ [Новый сезон] • Майнкрафт](http://i.ytimg.com/vi/380Q7gLWGvk/mqdefault.jpg)
"I don't use dust collection"
Realy!?!? Could have fooled me lol
Thanks for the upload man. Been driving myself crazy looking at all the different table saws out there. This video pushed me over the fence to buy grizzly. Thanks.
Have had mine for over 3 years now and find it to be an outstanding part of my shop. Wouldn't trade it for anything.
I have the original g771, converting to 240V really brings out the capability of this saw. Starts faster and doesn't bog down.
8:31 a mouse is running around on the lower right of the screen by the cord.
Good catch! You must be a cat.
@@MucaroBoricua 😂😂😂😂😂😂
This Grizzly saw is a 2 HP not 1-3/4. This saw has more power and cuts better than all of the 1-3/4 HP saws like the Sawstop contractor saw, Powematic hybrid saw, Baileigh industrial hybrid saw, laguna hybrid saw, and Rikon hybrid saw. The Grizzly is also cheaper than every one of those to boot. The only other saws that are comparable in power and price are the Shop Fox and Woodtek hybrid saws, but even they are a bit more expensive though. This Grizzly is hands down one of the best hybrid saws on the market.
Grizzly uses Leeson motors as well whereas many of the other brands cut corners and use cheap motors
Looks like the updated fence system is a nice improvement over the older fence :-)
Maybe but it's noisy as hell when he moved it. Is that due to all the sawdust buildup?
Can you elaborate on moving the fence "one bolt hole"? How much was that and what was the rip capacity then? Looks like you put it back to original position.
After several years of use would you still buy this saw again? How has the accuracy of the fence been since you bought it? Thanks for the review!
I've had nothing but issues from one of their products. My wife and I drove over 5 hours, and spent over $1200 at the Grizzly showroom in Missouri. Honestly the showroom is amazing. The product I got...not so much. I've had over 10 separate issues including defective, and back ordered parts sent to me. Grizzly did offer me $100 to keep the pos 😂😂😂. I like high quality tools, and won't hesitate to spend the money on them. SCM, felder, festool, saw stop etc. I like decent hand tools such as snap on, Milwaukee, dewalt, and I even think husky is decent due to being able to swap tools easily when they break one the job. We even have some harbor freight tools that I think are very very good. My experience with grizzly has been that of a dollar store drill press. Not to mention they will not post my review on their actual website.
WeLoveWoodworking sorry to hear that. Two table saws and a jointer have worked great for me. Great customer service, fast shipping and great warranty’s (that I haven’t had to use). Sorry you’ve had such a bad experience
Grizzly tools are the best bang for the buck. My lathe (G0766) has been outstanding, so has my table saw.
I hope you're using 12 guage extension cord lol.
Nice review!!!
How did you get it from the UPS hub to your house and unload it??
2010stoof yes sir it was. And I had a buddy with a lift gate truck.
@@keycitywoodworks nice!! Great friend with a great truck!!
Noisy fence. Has it always been that way? Or is that due to all the sawdust buildup?
Mark Keeler just the buildup. Needed to be waxed
Thanks for the detailed review. But hey, saw dust and smoking don't go well together.
So you have been completely MIA for a long time. Are you still using this saw, and if yes, what are your long term opinions on it??
hey, do you think a Incra LS positioner will fit this saw?
i was just wandering if you still had this saw and if not which kind of saw would you perfer
I don't have this saw anymore, but I do have the newest version of this saw. Yes, I would still highly recommend it over the competition at its price point.
would you purchase this saw again,,i have been looking at this one and the delta 36-735 that lowes sells and I like the fence system on delta but I have heard horror stories about deltas customer service,,,but if you look at the you tube videos on the saw everyone seems to not have any complaints other than the instructions aren't too good
jeff oldham deltas have, and continue to be great saws. However, you do tend to pay a considerable bit more for them. As I’ve said Before, it’s my honest opinion that no one can touch the quality of this saw in this price bracket. In short, I’d absolutely buy it again
thank you for responding,,it helped alot
Little late comment, but I was considering getting this saw and the only concern I have is the fence/aluminum rails. Have you found that to be an issue at all?
I was wondering the same thing
It's a problem if it gets dented.
what is the vertical height of the saw
tolomjagroop john 35.5"
are there any issues with the beveled edges on the wings? others have it them not match up. how long have you had it? thanks for the review!
ri mar they went together great for me. They take some time, making some adjustments, but you can get them perfect if you invest the time. And it's been about 3 months.
thank you, now since the 715p is discontinued this is my only option.
Its a good option.
Right Mar the 833 is the replacement for the 715
that table and trunnion assembly is exactly the same as my rigid table saw. i know this because i just had mine apart for bearing replacements. the blade insert is the same. the cast top looks identical. i wonder if the motors are the same?
I just replace my r4512 with this and I think its all the same like you mentioned. My r4512 miter slots were not T-slots but otherwise the motor is identical
Zachary Dixon can you tell me if the trunnion on the r4512 is mounted to the cabinet like it is on the Grizzly? Thanks in advance.
@@rfmcqueen72 hey...sorry for the late reply. Cabinet mounted.
Ohio Outdoors well actually they are not the same but share a bit of similarities only in the top casting but not underneath. The Ridgid is using trunnions that mount to the cast iron top and the Grizzly uses cabinet mounted trunnions. Now the tops are very similar and possibly made in the same factory but again there are slight differences underneath because of the mounting locations for the trunnions. I believe the throat plates are the same thickness so again possibly same factory but Grizzly takes it up a notch by mounting the trunnions in the cabinet and not mounting them to the top underneath as the Ridgid. Both great saws but again trunnion assembly isn’t the same. A quick google search will show the Ridgid using trunnions mounted to the bottom of the cast iron top and the Grizzly will show the the trunnions mounted to the cabinet. Now the previous model the Grizzly G0777 without the “Z” did use trunnions mounted to the cast iron top like the Ridgid but the newer model they upgraded the trunnions to cabinet mounted trunnions. This is assuming your speaking of the R4512 or the newer R4520. I believe the older model the R4511 possibly used trunnions mounted to the cabinet but if it is the R4511 with cabinet mounted trunnions than the tops are not the same.
Zachary Dixon totally incorrect Zachary, a quick google search will show without a doubt that the Ridgid R4512 uses trunnions mounted to the cast iron top and not to the cabinet like the Grizzly G0771Z.
Clean your shop! A clean shop is a much safer shop.
I was literally in the mist of a massive clean up and reorganize when I filmed this. Thank you though, you’re completely right.
nice review, please quit smoking ;-)
I since have! Thank you!