Ultimate Rock Crawling Trailing Arms

This is the single shock version of our RuffStuff Ultimate Rock Crawling Trailing Arms - heavy duty trailing arms specifically designed for the rocks!
Product: www.ruffstuffs...
The Dual Shock Trailing Arms are designed more for long wheelbase vehicles and full tube chassis buggies. The Single Shock Trailing Arms at 40" long are built for shorter wheelbase vehicles like Wranglers, Cherokees, Land Cruisers requiring less modification to fit. These are meant to be the strongest arms possible. Built to take hit after hit, you can even make them stronger with the optional Universal Tube Reinforcement.
Easy weld-it-yourself kit for the competent welder or completely welded and ready to install, they are narrow-profile, easily customized, and tough as nails. These come with a Lifetime warranty when welded by RuffStuff Specialties, All competitive racing applications INCLUDED!! Our URC Trailing Arms measure 40" eye-to-eye, with a 2" x .25" wall DOM main tube, 1/4" thick 1-piece main plate bent 4 times for maximum strength, minimal welding and warpage, and easy assembly.
Shocks mount BELOW the line between the bushing and heim (Unlike some competitors!) which prevents the trailing arm from trying to rotate when the shocks push down on it because the shocks "hang" below the center line. This Extends bushing life because the bushings and shocks are pushing to keep the arm straight together rather than the shocks fighting the bushings and trying to rotate the arm. These arms could be customized to use heims and uniballs instead of bushings (even without wobble stops). Dual drain slots allow for easy cleaning and helps extend life of shock eyelet bearings.
Will not cause bent shock shafts should a bushing wear out or fail.
Second hole can be used as a strong and simple limiting strap mount if bypasses aren't used.
3" wide polyurethane bushings at the frame side and our famous 1-1/4" heim joints on the axle side.
1/2" shock bolt holes set for 1.5" misalignment width.
Each arm weighs in at ~32.5lbs welded.
Notes:
Please allow 5-7 days lead time if you choose for us to weld them.
Due to tolerances in the tube and plate bending, although both are CNC bent, slight grinding may be necessary for perfect fitment of components
www.ruffstuffspecialties.com
916-600-1945
[e-mail]
3237 Rippey Rd Ste 200
Loomis CA
95650

[@KiG1208]

Yes please!