I will try and get one next time I am out there. It is a full time flow line though, so you would need to add a diverter valve in there to operate the scraper up and down. This setup was for a backhoe with valves on the hoe.
I did clean out the tank but don't remember seeing anything at the bottom. The draw for the pump in mine is a metal tube that comes up half way in the tank.
@@andrewstewart9054 I need to check that. I did not see that and could be part of the slowness I have been seeing. It's always been slow so I figured it was just the flow of the unit. Thanks for pointing that out. I will see what it has.
Can you clean the site view from inside the tank with a rag
Sure.
Could you show a video of where and how your auxiliary outlets hook up from hydraulic power source. Wanting to pull a scraper with mine.
I will try and get one next time I am out there. It is a full time flow line though, so you would need to add a diverter valve in there to operate the scraper up and down. This setup was for a backhoe with valves on the hoe.
Hi did you clean the siv on the bottom off the tank
I did clean out the tank but don't remember seeing anything at the bottom. The draw for the pump in mine is a metal tube that comes up half way in the tank.
@@SeidelRanch that's the return there's a metal cup with a handle you push down and the whole unit comes out with the filter
@@andrewstewart9054 I need to check that. I did not see that and could be part of the slowness I have been seeing. It's always been slow so I figured it was just the flow of the unit. Thanks for pointing that out. I will see what it has.
How do you change transmission oil... I've got milky oil leaking out around pto shaft
There is a drain plug under the transmission and a filler under the seat. Also change the filter in the front grill.
@@SeidelRanch Thnx 4 the time... Good Karma awaits You.
What's the filter number and gasket number? The john Deere dealer can't find it.
The filter in the reservoir can been seen here: partscatalog.deere.com/jdrc/sidebyside/equipment/73571/referrer/navigation/pgId/259775
@@SeidelRanch Thanks alot! super useful info!
@@Pause0 Thanks. Glad it was helpful.
Need to clean up the whole area..is dirty..
I agree. I should have cleaned it up much better. Luckily after all this was done it got a good bath.
Can you clean the site view from inside the tank with a rag
You probably can, but I pulled mine off to clean it really good when it was empty.