Nice video and thank you for clarification of the situation. Yes all of our engines are sealed and coded now to protect both the buyer and seller. We are serious about our end users experience and only want you to receive the best.
Thank you. I have to say what feels right to me. This engine runs surprisingly well. I discovered the differences with the XRB, beyond the visible differences like the cuts there are actually parts specific to the Dusty, it's very interesting. I'm curious now to compare my dirt to my M5S and I'm tempted to buy a dirt R
Great power! Looks like a good engine. I just had an engine fail on break in. Firts a leaky glow plug because the head button was machined badly. Then front bearing was bad. After all that, the backplate was leaking. Just a dud. They sent me a whole new engine. Runs perfect.
What a shame man, one of my lrp .28s was like that on my savage twin. I couldn’t tune it for crap and it ran very inconsistent then I saw raw fuel coming out the front bearing, took the flywheel off and I was able to spin the bearing seal with my finger. Replaced it and it was like brand new after. Great video as always
Thank you! Yes its a shame.. I got scammed buy a shitty ebay seller 😠 Im really happy that shes running good now, and surprised by the power. Comparison with the xrb video will be very interesting, revealing Ielasi's secrets 😁 Ielasi Tuned USA did not wanted to tell me about the Ielasi Modds, but now I know!
I buy in bulk bearings and always think it’s the best thing to always change frequently especially when tuning issues are a problem thanks again tasty b !!! Awesome info as always 🤜💯🙌🇦🇺🫡
Totally agree! Thanks to my sad experiences with the reds and this engine, now i know exactly the sound of a defective bearing.. I will be paying attention to the bearings and change them more oftem, plus ceramic bearings are not very expensive and it can save your engine!
Glad you got it all sorted, sounds like an awesome engine. I have had a lot of front bearings cause tuning issues which is a real pain. I'm sure you will be reviewing some more engines after Christmas ⛄ haha
Thanks, I am really happy that shes finally running good, it was a pain untill there.. I was too focused on the tune and didnt think that those brand new bearings would fail.. You know me 😁 New engines coming up in 2024👍
awesome video love my dusty r very powerful engine be interested in finding the truth to ielasis claims but either way very good engines shame about your bearing issue but look forward to more content on it :D
Thank you Alistair, i checked both engine's numbers and measured the internals and there interesting stuff to say about the dusty. Good video coming up soon
Damn rain. It was almost perfect. Just a minute more lean on the low and idle gap it would be a perfect tune. Runs very good now. That we didn't hear those bearings still bugs me. Definitely need to rebuild my P3TT and see if the damage from the coating is the issue. Hope i can get that to run good again. Excellent vid again buddy 👊
Yes almost and it was not difficult to get there.. I definitely need to pay attention to the bearings, now I know exactly the symptomes of defective bearings, think this is 50% of tuning issues.
@@TastyBRC I know exactly what to listen for, but on a new engine you aren't listening for that. it's like your cognitive brain just doesn't focus on that. And that bothers me. Think it was 100% of the problem. Now it's tunes and runs good.
Merci à toi Hervé 👍 Aucun mérite, dans ce cas c'est juste une évidence. Dans la prochaine vidéo je compare les deux moteurs et il y a des découvertes intéressantes à révéler
@@TastyBRCsalut tastyB, j'ai hâte de voir la comparaison des deux moteurs car je possède le OS. Je sais que je peux monter des pièces de certaines version Speed mais je ne sais pas lesquelles. J'avoue ne pas être doué en anglais c'est dommage. Peut être un sous titre en français 😅🙏. Toujours au top sur les réglages moteur c'est impressionnant.
@@ZobMama91 Merci! Les sous-titres sont disponibles en français, paramètres > traduction automatique > Français. Je nai pas encore testé la compatibilité avec d'autres moteurs OS mais j'ai aussi entendu dire que tu pouvais installer des pièces speed.
@@TastyBRC merci pour l'info c'est cool, je vais moins galèrer du coup 😅. Oui c'est sur même mais il faut que je me renseigne dessus. Je l'utilise en GT8. Vivement ta vidéo ça va être top 👍👌
That engine has got really good bottom end. I wonder how your run times will be now? Some times when they tune them(Ielasi tune) like that it should maybe some times increase your run time hopefully. Yeah that sounds a lot better with the new bearings.
Bottom end was really good, even with the reds 2104pipe, wich is definitely a top end pipe. I want to try again with the ielasi 2186, I love the sound of that pipe. Im also curious about the mielage, also going to compare that to the XRB, thats going to be very interesting.
o man awesome power. now iam concerned I might be haveing the same issue with a fue of my engines 😢 especially my new novarossi gimar it is have this very same problem with the raised idle no matter what the tune
Whoa there, careful saying a leaking front bearing is causing tuning issues, you're going to upset the "front bearing is merely a dust shield and has nothing to do with air sealing" people. I stopped arguing with them some time ago
Idle is much better 💯 - So, I’m confused about what Ielasi said about their “Guarantee sticker”…. Did they offer to fix or replace anything on your engine? Ielasi engines are expensive and I agree with you, they should be close to perfect when you get them. I assume you bought the bearings yourself, right? - I’m happy you were able to get her all fixed up and running well now. It’s always frustrating chasing idle issues - Looking forward to the vid where you compare the OS engine. That’s the very best way to learn Thanks for the fun vid Tasty 🩷
Thanks for the comment. I dont know if it is because of my first video but a few weeks after that video Ielasi annouced that now the engines will come with a guarantee seal. I got scammed by the seller so didnt complained to ielasi. I could have send it back to the seller instead. Comparison vid with the stock xrb will be very interesting, revealing Ielasi's secrets! Ielasi tuned USA dinot wanted to tell me about the dusty specs compared to the xrb but now I know 😁
@@TastyBRC I could guess how you got scammed but, how exactly did you? Is the engine counterfeit or used or what exactly? - It think these topics are good to discuss so that, the hobby community can learn what is going on. Thanks for taking the time to reply
@@a2rc no, it was not used, brand new but came with some scratches on the piston, minimal stuff but proof of a handling issue. Also rust inside the crankshaft, ielasi puts a dissecant bag just like you, so obviously this engine got disassembled and treated with no care.. The only complain I can make of Ielasi's work is the DLC, no dlc inside the crankshaft , defintely cheaper dlc than what you usually get with a OS engine.
@@TastyBRC Thanks for the explanation. I remember you showing us the condition which, was sad for a brand new top of the line engine - It is probably a good thing for the company and customer, to see the sealed sticker now. That way no one has to guess if it was opened and messed with or not
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Another great video.. thanks
Thanks again my friend
Nice video and thank you for clarification of the situation. Yes all of our engines are sealed and coded now to protect both the buyer and seller. We are serious about our end users experience and only want you to receive the best.
Thank you. I have to say what feels right to me. This engine runs surprisingly well. I discovered the differences with the XRB, beyond the visible differences like the cuts there are actually parts specific to the Dusty, it's very interesting. I'm curious now to compare my dirt to my M5S and I'm tempted to buy a dirt R
Love your vids mate. You are really into nitro! The fascination of nitro racing is unparalleled.
Thank you! 🙏
Great power! Looks like a good engine. I just had an engine fail on break in. Firts a leaky glow plug because the head button was machined badly. Then front bearing was bad. After all that, the backplate was leaking. Just a dud. They sent me a whole new engine. Runs perfect.
Yes, surprisngly good! Ielasi did a good 'tuning' job, next vid will be interesting.
What engine was that?
@@TastyBRC A Cheap little 2.19 Dynamite. I used it for a revo 3.3.
Air filter probably got a bit wet at the end. She’s perfect now. Good diagnostic skills man!!
Thank you Evan.
Yeah probably, she got a good soak of the after-run as soon as I got home
Nice. Yeah I've been having trouble with my novarossi 21 in my Revo erratic behavior on decel. Time for bearing change..💪🏾
Thanks ✌️ I think that new bearings will fix 50% of tuning issues 🫤 easy and cheap fix
What a shame man, one of my lrp .28s was like that on my savage twin. I couldn’t tune it for crap and it ran very inconsistent then I saw raw fuel coming out the front bearing, took the flywheel off and I was able to spin the bearing seal with my finger. Replaced it and it was like brand new after. Great video as always
Thank you! Yes its a shame.. I got scammed buy a shitty ebay seller 😠 Im really happy that shes running good now, and surprised by the power. Comparison with the xrb video will be very interesting, revealing Ielasi's secrets 😁 Ielasi Tuned USA did not wanted to tell me about the Ielasi Modds, but now I know!
I buy in bulk bearings and always think it’s the best thing to always change frequently especially when tuning issues are a problem thanks again tasty b !!! Awesome info as always 🤜💯🙌🇦🇺🫡
Totally agree! Thanks to my sad experiences with the reds and this engine, now i know exactly the sound of a defective bearing.. I will be paying attention to the bearings and change them more oftem, plus ceramic bearings are not very expensive and it can save your engine!
Great vid and info! Sucks the rain stopped the fun that engine was running good bro💯👍🏾👍🏾
And the rain hasn't stopped since 😑 Thank you for the comment 👍
Awesome video bro appreciate it 🤜🤜
Thank you Tony 👍
perfect job champ🤩🤩🤩
Thank you brother
Glad you got it all sorted, sounds like an awesome engine. I have had a lot of front bearings cause tuning issues which is a real pain. I'm sure you will be reviewing some more engines after Christmas ⛄ haha
Thanks, I am really happy that shes finally running good, it was a pain untill there.. I was too focused on the tune and didnt think that those brand new bearings would fail..
You know me 😁 New engines coming up in 2024👍
awesome video love my dusty r very powerful engine be interested in finding the truth to ielasis claims but either way very good engines shame about your bearing issue but look forward to more content on it :D
Thank you Alistair, i checked both engine's numbers and measured the internals and there interesting stuff to say about the dusty. Good video coming up soon
@@TastyBRC i’m looking forward to it
Damn rain. It was almost perfect. Just a minute more lean on the low and idle gap it would be a perfect tune. Runs very good now. That we didn't hear those bearings still bugs me. Definitely need to rebuild my P3TT and see if the damage from the coating is the issue.
Hope i can get that to run good again.
Excellent vid again buddy 👊
Yes almost and it was not difficult to get there.. I definitely need to pay attention to the bearings, now I know exactly the symptomes of defective bearings, think this is 50% of tuning issues.
@@TastyBRC I know exactly what to listen for, but on a new engine you aren't listening for that. it's like your cognitive brain just doesn't focus on that. And that bothers me.
Think it was 100% of the problem. Now it's tunes and runs good.
Salut my Friend 😉
Franchement tu vas dire que je me répète 😂 mais tu es juste impressionnant dans ton analyse.
Un grand respect a toi 👌👍
Merci à toi Hervé 👍 Aucun mérite, dans ce cas c'est juste une évidence. Dans la prochaine vidéo je compare les deux moteurs et il y a des découvertes intéressantes à révéler
@@TastyBRC j'ai hâte de voir tout ça 😉
@@TastyBRCsalut tastyB, j'ai hâte de voir la comparaison des deux moteurs car je possède le OS. Je sais que je peux monter des pièces de certaines version Speed mais je ne sais pas lesquelles.
J'avoue ne pas être doué en anglais c'est dommage. Peut être un sous titre en français 😅🙏.
Toujours au top sur les réglages moteur c'est impressionnant.
@@ZobMama91 Merci! Les sous-titres sont disponibles en français, paramètres > traduction automatique > Français.
Je nai pas encore testé la compatibilité avec d'autres moteurs OS mais j'ai aussi entendu dire que tu pouvais installer des pièces speed.
@@TastyBRC merci pour l'info c'est cool, je vais moins galèrer du coup 😅.
Oui c'est sur même mais il faut que je me renseigne dessus. Je l'utilise en GT8.
Vivement ta vidéo ça va être top 👍👌
That engine has got really good bottom end. I wonder how your run times will be now? Some times when they tune them(Ielasi tune) like that it should maybe some times increase your run time hopefully. Yeah that sounds a lot better with the new bearings.
Bottom end was really good, even with the reds 2104pipe, wich is definitely a top end pipe. I want to try again with the ielasi 2186, I love the sound of that pipe. Im also curious about the mielage, also going to compare that to the XRB, thats going to be very interesting.
o man awesome power. now iam concerned I might be haveing the same issue with a fue of my engines 😢 especially my new novarossi gimar it is have this very same problem with the raised idle no matter what the tune
Probably... try changing the front bearing, easy and cheap
What brand of bearings do you use brother 👊😎
Avid or Donuts racing, cheap and durable 👍
@@TastyBRC
Thank you Sir 👊😎
How does it compare to the os 2104
The b2104 makes more power from bottom to top, its more responsive probably a better Race engine
Whoa there, careful saying a leaking front bearing is causing tuning issues, you're going to upset the "front bearing is merely a dust shield and has nothing to do with air sealing" people.
I stopped arguing with them some time ago
No need to argue about facts! I replaced the bearings and now she runs great.
Thanks for stopping by 👍
Bien nerveux central petit moteur
Idle is much better 💯
- So, I’m confused about what Ielasi said about their “Guarantee sticker”…. Did they offer to fix or replace anything on your engine? Ielasi engines are expensive and I agree with you, they should be close to perfect when you get them.
I assume you bought the bearings yourself, right?
- I’m happy you were able to get her all fixed up and running well now. It’s always frustrating chasing idle issues
- Looking forward to the vid where you compare the OS engine. That’s the very best way to learn
Thanks for the fun vid Tasty 🩷
Thanks for the comment.
I dont know if it is because of my first video but a few weeks after that video Ielasi annouced that now the engines will come with a guarantee seal. I got scammed by the seller so didnt complained to ielasi.
I could have send it back to the seller instead.
Comparison vid with the stock xrb will be very interesting, revealing Ielasi's secrets! Ielasi tuned USA dinot wanted to tell me about the dusty specs compared to the xrb but now I know 😁
@@TastyBRC I could guess how you got scammed but, how exactly did you? Is the engine counterfeit or used or what exactly?
- It think these topics are good to discuss so that, the hobby community can learn what is going on.
Thanks for taking the time to reply
@@a2rc no, it was not used, brand new but came with some scratches on the piston, minimal stuff but proof of a handling issue. Also rust inside the crankshaft, ielasi puts a dissecant bag just like you, so obviously this engine got disassembled and treated with no care..
The only complain I can make of Ielasi's work is the DLC, no dlc inside the crankshaft , defintely cheaper dlc than what you usually get with a OS engine.
@@TastyBRC Thanks for the explanation. I remember you showing us the condition which, was sad for a brand new top of the line engine
- It is probably a good thing for the company and customer, to see the sealed sticker now. That way no one has to guess if it was opened and messed with or not