You can add to your power distance by looping your bands over nylon pulleys and making a sliding mount underneath the long stock , this way you can load it with a little more ease under less tension, then pull the hand grip mount for the other ends of the bands TOWARDS you, wrapping around the pulleys at the end of your rifle, and hook them on pre-set pins, thus dialing up for power, the farther you pull it back to anchor it, the more tension and power you have and the ball will continue to accelerate the whole length of the rifle, not just 14 inches. THis will also increase accuracy. This will require slightly longer bands as you are nearly doubling the length they are stretching.
The best way to enjoy this in Asia is ripping cans and things that are due for the trash can. This is already perfect, as others said, it's the bands that carries the slingshot / rifle. The good thing about this is when you need to replace it, you can always reuse the slingshot trigger and scope.
The rifle stock looks great. The camera work and editing were also really good. I wonder if a heavier pouch might not be in order or another 1/4” on the bands? I saw some pouches a while back that had a tab sticking out of the back to make release easier. Something like that only with a paracord loop instead might make cocking the gun easier. And maybe safer. This video was fun for me to watch and I look forward to more. Thank you.
Awesome man thanks for the ideas and feedback, I just put a different pouch on that has a lot more grip and it’s a lot easier to load. I’ll look into the tab pouches. Thanks
Well done. Amazing video. I always wanted to build one of these and always wondered how accurate they really are. I could never find a video that really focused on the accuracy until now.
This is awesome! I'm a slingshot hunter over here in the UK and with some heavy 1mm or 1.2mm bands and some 11mm steel / 10mm leads you could have a deadly hunting set up which will probably be stronger than our legal limit air rifles (only 12 ft/lb).
great job editing, are you using apple movie maker? Its like a pro video even though you don't have many subscribers yet. I think it the release system was better or if you could use rocks it would be awesome, find ammo all over the ground.
Nicely made rifle, well done young man. I made a slingshot rifle were you slide the forks back to load and the cock the bands, much safer. Rather than use bands i use thick tubes used on wrist band slingshots, Barnett type, they last longer and are more powerful.
I made one of these for shooting marbles. It could easily kill someone. I didn't know that they could be that powerful when i started. I had 4 bands per side on mine.
Hello, my friend, I am writing to you from Saudi Arabia, and I admire the video clips in which plastic bead guns are made. How many clips that talk about these innovations, but I did not find any of them talking about the lengths of the guns and the appropriate lengths of plastic rubber. Would you be so kind as to be the first to talk about the lengths? I hope so.
Hello, please tell me which circular knives are good for cutting rods on a slingshot, and the Chinese ruler for slingshots, which you cut in the beginning of the video on a slingshot gun.
Thanks man, I won’t be making more anytime soon, it’s a lot of work just to sell it. I am going to make a beginners slingshot rifle video you can make at home soon that you can follow along if you want 🤷♂️
Greetings from Australia, would you kindly have a link to that scope you fitted, i don't see the plate that you screwed to the stock before fitting the scope, they seem to fit straight to a gun barrel, many thanks in advance.
This is the link to the red dot, the plate is a screw in picatinny rail. Pinty Red Green Reflex Rifle Scope Dot Sight 4 Different Reticles Black Khaki a.co/d/5jD2dKK
Hello, new subscriber. I'm from Colombia. It seems to me a very good idea, but I have a problem that I don't know what the trigger mechanism is called. Could you help me with that?
@@naafiabdulnaafi7476 8mm losses speed and momentum pretty quickly so it would guess it would have to be a relatively close shot for a clean kill but it’s possible. If I was strictly going for body shots I would choose a bigger ammo and a heavier band.
Hey man, Amazing build! I was wondering ... how long do you think the overall rifle should be so that it still has a decent amount of power to it? I've been making one (inspired by you! Yours looked so cool I just had to make one!) from some scrap wood, and at the moment it is around 1.3m long (from the back of the stock to the end of the rifle) ... and it just looks too big and is pretty heavy. I was thinking I could cut it down to 1m but I am just worried that it is going to be not a long enough draw because there still needs to be space for the scope and the trigger. So I guess I was just wondering what your thoughts are? Thanks 😁
I would say at least keep the barrel part as long as your draw length. That’s what I did with mine but I wish I made it about 2 or 3 inches longer. If you do cut it, I wouldn’t go any shorter than your draw length. Good luck 👍
@@hudsonhertz I've finally finished my rifle! I just attached a red dot to it and have been shooting it a heap and I've found that I've gotten it pretty close. All my shots are within 8cm of the target, however when I finally hit the spinner, the next few shots seem to fly either high and left, or low and right ... its funny because it seems to only be missing in a straight diagonal line, but however much I try and adjust the red dot to account for this, it never seems to fix it. The only thing I can think of is that potentially I am being a little inconsistent with how I load the rifle... but I'm being as precise as I can. Did you experience anything like this when you were sighting yours in? 🤔😆
I wanted to use 8mm for this slingshot rifle but its shooting 9.5mm better. I will be sure to sight in with 9.5mm and keep the setup the same. Thanks for the comment!
Very nicely made. PRETTY... FOR SURE! You are REALLY too young to lose an eye for the rest of your life... just cuz you did not wear safety goggles. Just saying.
Got my 2 triggers today and starting my build tomorrow, gotta say yours is the best instructional video by far ❤️👍
You can add to your power distance by looping your bands over nylon pulleys and making a sliding mount underneath the long stock , this way you can load it with a little more ease under less tension, then pull the hand grip mount for the other ends of the bands TOWARDS you, wrapping around the pulleys at the end of your rifle, and hook them on pre-set pins, thus dialing up for power, the farther you pull it back to anchor it, the more tension and power you have and the ball will continue to accelerate the whole length of the rifle, not just 14 inches. THis will also increase accuracy. This will require slightly longer bands as you are nearly doubling the length they are stretching.
That is a cool slingshot rifle! 👍 Well done Hudson!
Actually, I wanna make slingshoot like this. And finally I found your channel. Thanks for sharing, Bro. From Indonesia 👍
Looks great dude. Accuracy’s impressive as well.
The best way to enjoy this in Asia is ripping cans and things that are due for the trash can.
This is already perfect, as others said, it's the bands that carries the slingshot / rifle.
The good thing about this is when you need to replace it, you can always reuse the slingshot trigger and scope.
awesome build Hudson
The rifle stock looks great. The camera work and editing were also really good. I wonder if a heavier pouch might not be in order or another 1/4” on the bands? I saw some pouches a while back that had a tab sticking out of the back to make release easier. Something like that only with a paracord loop instead might make cocking the gun easier. And maybe safer.
This video was fun for me to watch and I look forward to more. Thank you.
Awesome man thanks for the ideas and feedback, I just put a different pouch on that has a lot more grip and it’s a lot easier to load. I’ll look into the tab pouches. Thanks
Watch out using thicker bands as they wont slide into the slot on the trigger unit.
Crude but effective....love the design.
i love the walnut stock, but please add a trigger guard, it will look way cooler and it will be a bit safer
You do make the best vids I love the dealing when my notifications come up saying Hudson herts I know it’s gonna be a banger
Thanks man 😂
Well done. Amazing video. I always wanted to build one of these and always wondered how accurate they really are. I could never find a video that really focused on the accuracy until now.
This is awesome! I'm a slingshot hunter over here in the UK and with some heavy 1mm or 1.2mm bands and some 11mm steel / 10mm leads you could have a deadly hunting set up which will probably be stronger than our legal limit air rifles (only 12 ft/lb).
Our air rifle laws in the UK are a sad joke eh
dude i live for your vids keep up the great work!!!!
great job editing, are you using apple movie maker? Its like a pro video even though you don't have many subscribers yet.
I think it the release system was better or if you could use rocks it would be awesome, find ammo all over the ground.
Can u make a hunting video with it ?
Nicely made rifle, well done young man. I made a slingshot rifle were you slide the forks back to load and the cock the bands, much safer. Rather than use bands i use thick tubes used on wrist band slingshots, Barnett type, they last longer and are more powerful.
I made one of these for shooting marbles. It could easily kill someone. I didn't know that they could be that powerful when i started. I had 4 bands per side on mine.
Fine craftsmanship kid!
Very nice!! New cam looks great too!!
Can't wait to see more doves going down with it. Thanks man!
Hello, my friend, I am writing to you from Saudi Arabia, and I admire the video clips in which plastic bead guns are made. How many clips that talk about these innovations, but I did not find any of them talking about the lengths of the guns and the appropriate lengths of plastic rubber. Would you be so kind as to be the first to talk about the lengths? I hope so.
The length of pull on the bands is about 25” so I make my active band length about 5”
Great work bro, can u make more powerful of this rifle for 30 to 60meter of distance shooting or hunting videos with it.
Awesome I know what I'm building this weekend 😂
Nice slingshot🤗
Its very cool i like it😮😮❤❤
How long is the " barrel" from the trigger release mech to its end in cm? Thanks
25 inches so about 63.5 centimeters.
Great Build ..Think a thicker Band say .7 or .8 would provide greater distance and speed
I just made .7 25-20mm for it, a lot more power.
Hello, please tell me which circular knives are good for cutting rods on a slingshot, and the Chinese ruler for slingshots, which you cut in the beginning of the video on a slingshot gun.
Beautiful work. Would you consider making another stock for sale to me in Colorado?
Thanks man, I won’t be making more anytime soon, it’s a lot of work just to sell it. I am going to make a beginners slingshot rifle video you can make at home soon that you can follow along if you want 🤷♂️
@@hudsonhertz thank you.
Good stuff tiger
Nice camera great graphics
This would be cool if it was set up for the little mini crossbow/slingshot fishing bolts.
Nice work. You should be proud of yourself.
Greetings from Australia, would you kindly have a link to that scope you fitted, i don't see the plate that you screwed to the stock before fitting the scope, they seem to fit straight to a gun barrel, many thanks in advance.
This is the link to the red dot, the plate is a screw in picatinny rail.
Pinty Red Green Reflex Rifle Scope Dot Sight 4 Different Reticles Black Khaki a.co/d/5jD2dKK
Super réalisation, bravo !!!!!!!!!!!!!!
What red dot did you choose? Can uou send me a link for it? Thanks
There is the link to the one I bought, good luck!
a.co/d/iLffrfp
i love it bro im really enjoy for watching
Magnifique slingshot
Very good and amazing brother
Bravo....top😊
looks like great fun. I'd love to build one, sad that it's illegal in germany.& austria
Great video and great job
ทำพานท้ายใด้สวยมากๆชอบครับ
Hello, new subscriber. I'm from Colombia. It seems to me a very good idea, but I have a problem that I don't know what the trigger mechanism is called. Could you help me with that?
It’s just a slingshot rifle trigger, I got mine from Amazon, here is the link…
a.co/d/4ls9CD0
very good friend congratulations 🇧🇷👍👍
Awesome i built one and the tock broke off is yours staible ?
The stock? Mine is really stable because it’s made out of walnut but I had one snap that was made of plywood.
@@hudsonhertz i built a nother one thats very sable
Yooo What a clean work looks great .... i want to make the stock but i couldnt find a right blue print with all dimensions can you share with me that
Thanks man, I didn’t have any blue print’s either so I just had to trace the stock of my pellet gun. Sorry.
where do you buy the sight
Amazon
👏👏👍👍👍🇧🇷
Borther which brand band your using and what the width setupe
I think is a Snipersling yellow, 0.7mm 23-13mm taper.
@@hudsonhertz thank u so much borther
@@hudsonhertz will it bring down dove with body shot?with 8 mm ?
@@naafiabdulnaafi7476 8mm losses speed and momentum pretty quickly so it would guess it would have to be a relatively close shot for a clean kill but it’s possible. If I was strictly going for body shots I would choose a bigger ammo and a heavier band.
@@hudsonhertz can u specify me what would be your setup exactly band and ammo so that I can use..
My master
اتمنا الرد علي بمقطع. انا اريد احجام كل القطع في البندقيه و اريد رابط القطع. اتمنا الردد❤❤😊
Donde puedo conseguir el sistema de gatillo que tiens ???
a.co/d/45noYYv
Nice ! 👍
Yes that good... I like
Where did you get the trigger system
Amazon
Super
Bro can u make some hunting video on this slingshot gun ...
Hey man, Amazing build! I was wondering ... how long do you think the overall rifle should be so that it still has a decent amount of power to it? I've been making one (inspired by you! Yours looked so cool I just had to make one!) from some scrap wood, and at the moment it is around 1.3m long (from the back of the stock to the end of the rifle) ... and it just looks too big and is pretty heavy. I was thinking I could cut it down to 1m but I am just worried that it is going to be not a long enough draw because there still needs to be space for the scope and the trigger. So I guess I was just wondering what your thoughts are? Thanks 😁
I would say at least keep the barrel part as long as your draw length. That’s what I did with mine but I wish I made it about 2 or 3 inches longer. If you do cut it, I wouldn’t go any shorter than your draw length. Good luck 👍
Okay yep 👌Thanks so much for the help! 😁
@@hudsonhertz I've finally finished my rifle! I just attached a red dot to it and have been shooting it a heap and I've found that I've gotten it pretty close. All my shots are within 8cm of the target, however when I finally hit the spinner, the next few shots seem to fly either high and left, or low and right ... its funny because it seems to only be missing in a straight diagonal line, but however much I try and adjust the red dot to account for this, it never seems to fix it. The only thing I can think of is that potentially I am being a little inconsistent with how I load the rifle... but I'm being as precise as I can. Did you experience anything like this when you were sighting yours in? 🤔😆
@@LeviMckinlay the best thing I can tell ya is to SLOWLY pull the trigger. Don’t punch it, it’s not as consistent and you flinch a little.
@@hudsonhertz Okay cool, thanks for the tip.
you should upgrade the trigger system
Looks like a British Lee enfield rifle.
Hey how long does snipersling take to be delivered
It depends on where you live but for me it’s about 2 weeks.
@@hudsonhertz ok thank you
Where did you buy your triger
I bought a couple of Amazon but you can find them elsewhere.
I want one of these.. do you have it for sale?
Sorry, I’m not selling it.
@@hudsonhertz With that quality and talent. Could be making money. I would buy one of these myself, depending on the price. Excellent job.
Is it possible for me to buy one?
Make sure to use the same ammunition don’t change it. Zero the red dot the that projectile and you should be good 👍
I wanted to use 8mm for this slingshot rifle but its shooting 9.5mm better. I will be sure to sight in with 9.5mm and keep the setup the same. Thanks for the comment!
@@hudsonhertz no problem. Really good work man really good.
Bro please make hunting video with this bad boy
GOOD
Bro u should go dove hunting with that
Cool!
Whats the measurements of the rifle..
In total is 42” long, 25” from the trigger to the fork.
Bro What is Scope name details please?
Pinty Red Green Reflex Rifle Scope Dot Sight 4 Different Reticles Black Khaki a.co/d/2MzTiyF
@@hudsonhertz Tnx bro response for me.
👍
How much you want to sale.
Sorry, not selling it.
Dude how old r u😅
16
Хороший двор
Ok
Need eye protection
Que vaina 🤔
Ill buy it of u
Sorry, not for sale.
Добрый день
Very nicely made. PRETTY... FOR SURE!
You are REALLY too young to lose an eye for the rest of your life... just cuz you did not wear safety goggles. Just saying.
Very nice 👌 have you chronograph it ?
Not yet, I haven’t got my hands in one.
Pefact...
looks great but needs a trigger guard to make it sweet
Haha yep, I've got a nice piece of brass for it 👍
Just glue some black rubber on the areas you’re framing it.
SAFETY GLASSES !!!!
show us the trigger system...
Добрый день