I would think that’s a doggy wire do u have multimeter with the bell sound on ? You can do a continuity test this will let you know if you have a break inside the cable
Hi Darren. My unit still works but needs a good tilt to get the water to come through pump each time I refill or turn it off between jobs. Any ideas what could be causing this and how to fix it. Thanks.
Jake Rose Hi Jake do you let it run out off water ? This sounds like a Air lock to me , as you can hear the pump going but after 30/40 secs later the pump kicks in ?
Jason Owen Hi Jason hopefully the pumps are back in stock this week on my website www.da-components.com/12-volt-replacement-chemical-pump-for-backpacks.html
Hi, my friend, the best thing to do with a backpack. It's ripped all the wires out. But a good quality pumping, and you be on your way and a good switch. An equality motor controller
Hi mate, mine started pumping the water at maximum power even if I put it on the standard power with the switch flicked up, any idea how I would fix this?
@@dacomponents No I try to turn the pressure down but nothing happens, it literally just went from how i had it set to max power and very loud mid flow this morning... I havent noticed the switch being hard to push🤷♂️ thanks for replying by the way👍
Well done Darren you saved me a lot of money. Took it apart like you said and the pump had got stuck. All fine now .Thanks
Fantastic news
Hi Darren the fuse keeps blowing on the backpact and getting no life at all. The charger shows green and turns red when plugged in any ideas plz??
Hi Darren, Myn turns up but no water comes out? You able to help?
Hi Darren, my backpack only works when it’s plugged in to charge . I’ve just put a new battery in. Any ideas to what the problem is ?
I would think that’s a doggy wire do u have multimeter with the bell sound on ? You can do a continuity test this will let you know if you have a break inside the cable
@@dacomponents thank you I’ll give it a try . Thanks
Hi Darren. My unit still works but needs a good tilt to get the water to come through pump each time I refill or turn it off between jobs. Any ideas what could be causing this and how to fix it. Thanks.
Jake Rose
Hi Jake do you let it run out off water ? This sounds like a Air lock to me , as you can hear the pump going but after 30/40 secs later the pump kicks in ?
@@dacomponents I try not to but sometimes it does run out. Yeah it usually takes that long to get it going and it's fine when it gets going again.
Yes definitely a air lock , top tip is to turn the backpack completely off as soon as possible! Or than that you could fit a non-return valve.
@@dacomponents OK thanks. How do I fit one of those and how do I get the airlock out?
Hello Darren can you link in the description the pump you have fitted to this.
Jason Owen
Hi Jason hopefully the pumps are back in stock this week on my website
www.da-components.com/12-volt-replacement-chemical-pump-for-backpacks.html
Jason Owen
www.da-components.com/12-volt-replacement-chemical-pump-for-backpacks.html
How do you change the switch Darren
I have same backpack and my pressure is on max constantly iv changed turning pressure down but it wont work
Adam Yates
Sounds like the mini controller has failed
Hi, my friend, the best thing to do with a backpack. It's ripped all the wires out. But a good quality pumping, and you be on your way and a good switch. An equality motor controller
mine keeps blowing a fuse! any ideas?
Paul k
Hi Paul, something is wrong somewhere what size fuse have u been using ? Have you changed anything?
Great Vid!! 8-)
Wollef der Fensterputzer
Thanks mate
fantastic! great info buddy
Trad - Man
Thanks matey
My backpack won’t switch off via the switch. 😮
Sounds like you need a new switch
Hi mate, mine started pumping the water at maximum power even if I put it on the standard power with the switch flicked up, any idea how I would fix this?
Simon Drury
So you can’t turn it down on the controller side ? Does the switch feel hard to push?
@@dacomponents No I try to turn the pressure down but nothing happens, it literally just went from how i had it set to max power and very loud mid flow this morning... I havent noticed the switch being hard to push🤷♂️ thanks for replying by the way👍
Simon Drury
Oks it sounds like the flow controller has gone if it does change in flow settings? I stock them too
@@dacomponents Right ok, thanks for your help mate👍
For a good motor controller will cause you a 106 pound. A wardrobe pump, I'll call you 85.
Hi Darren, Myn turns up but no water comes out? You able to help?
@@Harry-k7g4o have you got the hose connected open on the orange pipe sounds like a air lock
Hi Darren, Myn turns up but no water comes out? You able to help?
Okies have you got the connection open on the end of the orange pipe ? Sounds like you may have a air lock