Good job man keep up the good work 👍. I also do coding and programming and now I do everything its fun to do. I hope your Page grows. Soon I will do UA-cam 👌💯
Hey man, I ran through all the steps and got the dash light to disappear. Only question is the part where I had to go into the file to change the parameters. There was no RDC_alive in the file. Everything seems okay, took a 40 mile drive and no lights came back. I'm worried about those steps where you changed it to nicht_activ though. Any advice?
Thank you for the RDC module delete. Curious if you have figured out with NCS how to reset CBS oil service reset, when vehicle is over the maximum mileage. and oil service cannot be reset. I have tried without success. I don't want to disable the oil service reset, although that's an option.
Hello please help! I have a 2009 BMW 335i xDrive and I have 4 RDC modules in the same location you do.. Do I need to remove all of them and follow the same steps? Any help would be appreciated!
Hey bro sorry for not answering so quick, I believe you have an LCI car which means that the RDC module is in a different location, if you’d like to shoot me a dm on Instagram @bmw_hn with pictures of the modules and I can help you there !!
I can’t turn the dash light off, the I drive Tmps isn’t in bold letter and can’t click on, it doesn’t work from steering either, wasn’t able with snap on diagnostic either
Yo. Which part do i stop at if i want to delete the TPMS system ONLY as i now have normal tyre valves fitted and not the usual sensor type.. thanks in advance.
Hello, 07 328i idrive dead last year so I am using eonon just for entertainment, last week I replace my wheel without TPMS sensor on after few hours i notice red light come out I try resetting with left switch knob but no luck maybe my idrive is dead and no signal I just want to remove this option even I thought its a safe option to do but I don't need this option in my car. I did my hunt for the RDC module but no luck (360) I did try code with the fuse out but still no luck even got WORSE left headlight high beam stays ON !? I did a trying factory reset but no luck" what should I Do now? anybody can help me to bring my car feature back to normal and disable my TPMS red light?
Looks to me like when you reset the module it activated the high beams as daytime running lights(which also happened to me although I forgot to mention it on the video), if I’m not mistaking I show how to code that out on my coding video if you would like btw message me on my instagram @bmw_hn and I will try my best to help you out !!
@@bmwhn7733 So if I follow this video exactly as you did it, will it activate the high beams as DRL? What step in the process needs to be fixed to make this not happen?
There’s actually nothing you can do to prevent it since you’re resetting the options back to factory, all you have to do is once you’re done with the TPMS process just disable the DRL by coding them out on your FRM once you do that the DRL will be deactivated.
I’m working on getting some mods but this whole coronavirus thing is really not helping lol but I’ll be for sure making some videos once I get some mods !!
Two thumbs up, this is the only video I found that helped me out, outstanding no more tpms light
Thanks for the support !!
I just wanna say thank you! Disabled my tpms and edc with this video!
Glad I could help you bro !! Please consider subscribing more videos otw !!
Good job man keep up the good work 👍. I also do coding and programming and now I do everything its fun to do. I hope your Page grows. Soon I will do UA-cam 👌💯
Thanks a lot !! Hope to see you soon on UA-cam 👍🏽
@@bmwhn7733 💯💯💯
Hey man, I ran through all the steps and got the dash light to disappear. Only question is the part where I had to go into the file to change the parameters. There was no RDC_alive in the file. Everything seems okay, took a 40 mile drive and no lights came back. I'm worried about those steps where you changed it to nicht_activ though. Any advice?
Thank you so much!
Absolutely brother ! Glad I was of help 🙏🏼
Dude I went through your whole process but still have the light inside the small square on my Speedo what do I have to do now?
hello. please help. Ive got an 09. located the RDC but keep getting stuck on NCS
Thank you for the RDC module delete. Curious if you have figured out with NCS how to reset CBS oil service reset, when vehicle is over the maximum mileage. and oil service cannot be reset. I have tried without success. I don't want to disable the oil service reset, although that's an option.
Honestly I’ve never messed with that since I can do it from the cars instrument cluster but I think you’d need to reset it using INPA
It didn't work for me everything you said was already set to not aktiv except the mmi thing and I set that to aktiv but the light is still on
Hello please help! I have a 2009 BMW 335i xDrive and I have 4 RDC modules in the same location you do.. Do I need to remove all of them and follow the same steps? Any help would be appreciated!
Hey bro sorry for not answering so quick, I believe you have an LCI car which means that the RDC module is in a different location, if you’d like to shoot me a dm on Instagram @bmw_hn with pictures of the modules and I can help you there !!
I can’t turn the dash light off, the I drive Tmps isn’t in bold letter and can’t click on, it doesn’t work from steering either, wasn’t able with snap on diagnostic either
Did you follow the steps as shown in the video ?
BMW HN yes I did several times, I diagnosed car, all shell sensors are okay “no tmps in tires and option on I drive is not in bold letters
Yo. Which part do i stop at if i want to delete the TPMS system ONLY as i now have normal tyre valves fitted and not the usual sensor type.. thanks in advance.
Did you ever figure this out!!!!
You said you were removing it until you go to the whole few seconds you say it’s just resetting and you’ll still have the light? So confused
Are those Honduras licensed plates awww my beautiful country
Yes sirrr they are !! 🇭🇳
Done this and no idea why idrive controller stopped working. Any ideas ?
Not sure tbh, did you by any chance change some of the settings for idrive while coding ?
Mine doesn’t show expertman?
Hello,
07 328i idrive dead last year so I am using eonon just for entertainment,
last week I replace my wheel without TPMS sensor on after few hours i notice red light come out
I try resetting with left switch knob but no luck maybe my idrive is dead and no signal I just want to remove this option even I thought its a safe option to do but I don't need this option in my car.
I did my hunt for the RDC module but no luck (360) I did try code with the fuse out but still no luck even got WORSE left headlight high beam stays ON !?
I did a trying factory reset but no luck" what should I Do now?
anybody can help me to bring my car feature back to normal and disable my TPMS red light?
Looks to me like when you reset the module it activated the high beams as daytime running lights(which also happened to me although I forgot to mention it on the video), if I’m not mistaking I show how to code that out on my coding video if you would like btw message me on my instagram @bmw_hn and I will try my best to help you out !!
@@bmwhn7733 So if I follow this video exactly as you did it, will it activate the high beams as DRL? What step in the process needs to be fixed to make this not happen?
There’s actually nothing you can do to prevent it since you’re resetting the options back to factory, all you have to do is once you’re done with the TPMS process just disable the DRL by coding them out on your FRM once you do that the DRL will be deactivated.
amazing can you remote program my 07 328xi help
I’ve never done it remotely before but I can try, can you message me on Instagram @bmw_hn
Job failed and now im unable to read any modules and it only shows my vin can you please help ?
I think you forgot to tell us to Add $265 vehicle order which it says in the article in the description please help me i hope i didn’t brick my car
any new mods to come bro?!
I’m working on getting some mods but this whole coronavirus thing is really not helping lol but I’ll be for sure making some videos once I get some mods !!
Does this work for a E92 M3?
It should work since the modules are the same, the only difference would probably be the location of the RDC module. What year is your car ?