Це відео не доступне.
Перепрошуємо.
How to Clean the P320 FOR BEGINNERS
Вставка
- Опубліковано 16 лип 2020
- If this is your first time to field strip and clean the Sig Sauer P320, this is the video for you! The P320 featured in this cleaning tutorial is a full size variant with a Wilson Combat Grip module. I find the Wilson Combat grip to be less bulky than the factory grip. It has more aggressive stippling that aids with coil control. The Wilson Combat grip has a better overall ergonomic feel.
Visit the Skull Crush website for cleaning gear and holsters: skullcrush.com
🇺🇸Thanks for watching!
My Cleaning Gear & Holsters here👇
skullcrush.com
Gun owner for years.. just bought a P320.. i know how to clean guns... thought i'ld look at youtube anyway for suggestions... your Explanations are EXCELLENT! One of the best of tons i've looked at for all my firearms... One suggestion and only one improvement.. i wear latex gloves while cleaning..
This is the best guide I've found on how to clean the p320. Thanks so much.
Clear, concise, and straight to the point. Well done.
This is a model for how instructional videos should be done. Thank you.
That’s a great compliment Nick! Thank you.
Nice video. I do want to make a comment that might help some viewers. When installing the guide rod your comment sounded like it should be obvious which way to install it. Actually, it is a very common problem to install it backwards. In addition, Sig doesn't make it easy because there are at least three different guide rods. I have three in front of me. The guide rod for the full size has a single spring and on mine and yours the breech end has a rectangular dimple in it. Compact and subcompact guide rods have two springs. The end with the double spring is the muzzle end. In addition some guide rods have the round breech end cutaway to have two flats on it. If it has flats the should be vertical so the narrow profile matches the barrel extension. As always, the manual is the best source of information.
Bought mine yesterday and already shot 200 rounds through it
Appreciate it
Thank you so much. I am looking to buy the Wilson Combat Sig P320. I wanted to make sure it was friendly to clean. I'm an 'ol tomboy and have used my hands a lot. I will be moving forward on my purchase.
Thank you very much for this video!
I'm a beginner, and I got my very first gun a few days ago, a P320 M18.
I'm so happy with it, thanks for your help!
Thanks I didn't realize how easy it was to remove the fire control piece.
Thanks I'm glad you made this I just bought a p320 9mm for my first handgun now gotta learn to take care of it........
Just bought my first, also Great video
Did you guys clean/oil yours before breaking it in? Gettin mine Monday
Thanks! Very helpful. My first clean before first shoot.
Very good video. Helped me clean my P320 for the first time with no issues. Thank you!!
Great job! Straight to the point, without all the testosterone-laden shit that plagues way too many firearm videos on UA-cam.
Awesome video great instructor, great pace very great instruction as I disassembled, cleaned, and assembled within 1 hour, and everything worked as described!! 5 stars!!
good video💯gives every detail needed including how many pads you used n stuff like that, I haven’t seen alot of videos like this
Excellent video! I had trouble the 1st time at disassembly and especially at reassembly of my new P320 Equinox , this video was very helpful . As you stated, there are a few tricks that are helpful, many thanks!
Thanks for the video man. Just got a 320 xfull rxp for my first pistol. Love it. Appreciate the info.
Congrats! Got a 320 RXP XCompact - first pistol - last week. Completed Basic Handgun Skills course and put my first 100 rounds downrange today. So much nicer than the G19’s I’ve rented.
Lucky timing as I can't find one now
Thanks for the video,
Just picked up a police trade in.
I just cleaned it &
Love ballistol.
Good day.
The most professional, description video I've seen . Thank you
Maybe THE best cleaning video tutorial I've ever seen!
Very helpful, thank you. My model is an X5 Legion, and the recoil spring isn't neatly packed on the rod like this one was. You have to (I assume) feed the loose spring end into the slide assembly and then compress it into place with the rod and then slip that into place against the barrel as shown in the video. Otherwise everything was the same.
Most detailed instructions I’ve seen. Thanks
Go checkout sig guy on the tube for all things SIG. You won’t be disappointed.
This made the process so much easier than reading the owner's manual.
Glad it helped Chris. 👍
Just added the Wilson combat grip on my M18 😁😏 best thing I've ever done & best gun I've ever owned period 💯💞 .
I agree. I feel the same way about the Wilson Combat grip.
Have you thought about changing the slide? Like maybe black wilson grip and like a stainless steel slide. I've been thinking about that
Thanks Skull, you're crushing it!
Very good video - well done - Just purchased a new Sig P320 X-Compact - Really like this pistol -
I saw that and fixed it. Then I came across your video and was glad I wasn't the only one who made this mistake at first.
Thanks for the video brother.
WOW, that was amazing! Thank You
Thank you!
BRAVO! Thank you for a CLEAR instructions!
Great video! I just bought My first 320(x compact) which was fun to shoot. Not spot on, but I'll get it.
Very thorough and helpful video. Thank you sir.
Very informative. Thanks for the video!
Liked subscribed and commented just cus of the quality of this video great instructing thank you
Great instruction !! I enjoyed the way you took your time to explain & show everything step by step .. Thank You
Nice presentation. Well done!
Much more through then the sig video. Great vid. 👍🏻
Great video, p320 will be my first hand gun I buy.
Best video ive seen! Thank you! 13:03
Excellent tutorial
Great video thanks for sharing
Thank you for the tip
Amazing explanation. Thank you!
Thanks for watching Silvano.
well detailled and good close ups well done thanks
Thank you sir.
very helpful thank you!
Great tutorial!
Excellent video!
Great video! Thank you!!
Well done! Thank you!
very helpful thanks
Excellent instructional video
nice job! thank you
Thank you
Good video. Thanks.
good guide, thanks
14 minutes well spent. 👍
Really helpful video, and I am a novice. Last time I took out the FCU, the safety lever pin just dropped out. Fortunately I saw it and slid it back in, although it still doesn't stay in place sometimes when I tip the FCU while outside of the grip module. Could anything have fallen out or gotten out of alignment in the seer housing while the pin was out? The gun dry fires fine but I have not taken it to the range yet. Thanks!
Thanks
Thank you for making this video and not asking to subscribe to your channel lol. Jokes aside, great video and thank you for the time.
Thank you for the extremely helpful video. It beats the awful manual by a mile. Do you expect this to apply to all P320s in every aspect? Including the X5 legion?
Yes, all the P320’s are basically the same.
@@SkullCrushInc thank you again. God bless man 🙌🏾
I’m subscribing! 👍
Thank you sir.
Please tell us about the holster.
skullcrush.com
How tough should it be to push the patch through the barrel? I have 2.5” patches and I can’t push them through with the jag. It’s been awhile since I’ve cleaned my gun but it doesn’t have too many rounds through it
Should be snug but not difficult. Cut the corners off the patch to make it smaller.
@@SkullCrushInc I’ll try that next. I use same patches on my Glock and have no issues, but on the sig I either have to force it or it just won’t even go
stiff slide catch? came straight here after my first time shooting my new 320 with the txg frame. put about 300 rounds through the gun and when i got home i noticed that the slide catch was impossible to depress and the slingshot method was the only way to send the slide home. did i miss something or is this a common issue?
Hard to diagnose without seeing it in person. Call Sig customer service and send it back if needed. Your P320 should be perfect. If not, let Sig fix it.
what are your fingers made out of. im having so much trouble taking my gun apart
the patches never come out clean out of the barrel. i used the metal brush several times, more than 10. and i used about 100 patches. any ideas why?
You can try a bore solvent first before the CLP but I think you’re okay. It doesn’t have to be perfect.
@@SkullCrushInc thank you
Nice video. This is my 1st time cleaning my Sig and when I assemble it after cleaning the recoil spring guide sticks out a little after I put the slide on. What did I do wrong?
Something to do with the recoil spring. Try rotating it and re-instal.
Cleaning my P320 for first time and saw that my Recoil Spring Guide is painted RED for 3/4 inch from top. Not sure what to do? Any advice? I bought the gun a week ago from local place.
Nothing wrong with your spring. The factory sometimes color codes the springs so they are easily identified in the assembly line.
Where did you get the module grip?
Wilson Combat
So no oil on the fire control assembly?
Just clean with CLP. CLP will leave lube residual.
After how many rounds fired do u think it's okay to clean?
I only have 200 rounds through it so far
Clean after every use, regardless of rounds fired.
My disassembly lever is super tight.
Jiggle the recoil spring guid rod when the slide is locked back. Sometimes that helps.
@@SkullCrushInc Thanks I'll try that.
The nylon brush your using is just a toothbrush right?
@@reptileguy8458 Yes, I was waiting on a regular gun cleaning brush to come in at the time I filmed.
@@SkullCrushInc Why? Looks like the toothbrush works just as good.
Thank dis is perfect for Cleaning my Gum thank
X compact grip or wilson combat ?
AnthonyS This is a full size Wilson Combat grip. Wilson recently came out with an X-Compact version.
@@SkullCrushInc Im asking what would you suggest though? Comfortability wise.
AnthonyS Definitely the Wilson Combat.
What brand holster is that?
Tara Carter Skull Crush
@@SkullCrushInc after I wrote that I checked out your website and found them! Any future plans on making them light/laser compatible? I have a Sig xcarry 9mm with a tlr 8 that I'm looking around for a nice otw for. That belt loop design is genius! I see you are a veteran and LE owned company as well, do you offer a LE discount? Thank you!!
Tara Carter Sorry, but we don’t offer anything for that setup. Thanks
I don’t know what I did wrong but now I have no click when i pull the trigger and I followed this video to the T
Take it to your local gun shop and have them take a look.
@@SkullCrushInc will be going to tomorrow gun smith unfortunately not in today. Thank you
Nice job thanks to the point unlike Biden 😮😮😢