Nice job! I have a 1990 extended cab b2200. I got it from a guy that thought the original engine had a blown head gasket so he sold it to me for $600. I had a 350 from a late 80s van that needed a home so the truck was perfect! I had recently built a TH350 for another project that never happened so the two were mated up. I have a friend with a shop so during my one week vacation, I did the swap. I modified the firewall with some new sheet metal and set the engine back a few inches so the oversized radiator sits on the stock location. I also narrowed an 8.8 from an explorer so the center section isn't off set but did relocate the fuel tank for exhaust clearance. I slipped a lunch box locker in the differential for added traction. I ended up ditching the power steering by simply making sure there was fluid in the box and looping the hydraulic line. With a fuel cell in the bed that pretty much "finished" this ongoing project! Minis with V8s are a lot of fun! Pretty cool seeing how other projects like yours turned out!
1. How fast have you had it. And 2. Can you please dm me idk of you can on here but I was planning the same build and now that somebody has done it I'd like some pointers to help me with the build.
Bro i put the same electric steering on my truck, but when i turn the steering wheel not returns, you have the same problem? If You can help me i appreciate that
Whoever did the angled playes fucked up. History is from a mini builder, its supposed to tilt left making it harder to read but following law still. Also, it should be centered, and turned counter clockwise by 15 degrees. Just tailgate lore tho, also only supposed to go in maybe an inch to 3/4 inch, not half the tailgate
Nice job! I have a 1990 extended cab b2200. I got it from a guy that thought the original engine had a blown head gasket so he sold it to me for $600. I had a 350 from a late 80s van that needed a home so the truck was perfect! I had recently built a TH350 for another project that never happened so the two were mated up. I have a friend with a shop so during my one week vacation, I did the swap. I modified the firewall with some new sheet metal and set the engine back a few inches so the oversized radiator sits on the stock location. I also narrowed an 8.8 from an explorer so the center section isn't off set but did relocate the fuel tank for exhaust clearance. I slipped a lunch box locker in the differential for added traction. I ended up ditching the power steering by simply making sure there was fluid in the box and looping the hydraulic line. With a fuel cell in the bed that pretty much "finished" this ongoing project! Minis with V8s are a lot of fun! Pretty cool seeing how other projects like yours turned out!
Man thats great make more about it 👍
Nice GT steering wheel you have on there
Any idea if there is a motor mount conversion kit or what they used to mount it all?
Did you have your beef the front end up due to how much heavier the 350 is than the stock 4 cylinder
Awsome video
What were the measurements for the motor mounts
Yo tengo una mazda b2200 89 y quiero iniciar también un proyecto asi algun consejo que me darías
Awesome
Wicked
Sooooo, where you located.. i need you to do mine😅😂😂😂
Will you have photos of the engine mounts, if you can send me a message I would appreciate it
What are the wheel and tire specs on it? Trying to decide what set up to go with for my b2200
Good question
Clean setup how differential, did you shorten it thanks
Didn't have to shorten the axle tubes or anything, just had to narrow the leaf spring perches.
1. How fast have you had it. And 2. Can you please dm me idk of you can on here but I was planning the same build and now that somebody has done it I'd like some pointers to help me with the build.
You just have the stock radiator in or did you replace it?
What size tire and rim does you use on the truck
Bro i put the same electric steering on my truck, but when i turn the steering wheel not returns, you have the same problem? If You can help me i appreciate that
What rear end you got under it ?
Whoever did the angled playes fucked up.
History is from a mini builder, its supposed to tilt left making it harder to read but following law still.
Also, it should be centered, and turned counter clockwise by 15 degrees.
Just tailgate lore tho, also only supposed to go in maybe an inch to 3/4 inch, not half the tailgate
Plates*
Fart
What transmissión
T56 out of a 94 Camaro.
what did you do for motor mounts?
Ebay solid motor mounts and custom brackets to attach to the framerails.
So a b5700?lol
What’s your email I have some questions.